There's no need to save the runtime map details in global variables, the
values are only required to pass to efi_runtime_map_setup().

And because 'nr_efi_runtime_map' isn't needed, get_nr_runtime_map() can
be deleted along with 'efi_data_len'.

Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add a new setup_data type SETUP_EFI for kexec use.  Passing the saved
fw_vendor, runtime, config tables and EFI runtime mappings.

When entering virtual mode, directly mapping the EFI runtime regions
which we passed in previously. And skip the step to call
SetVirtualAddressMap().

Specially for HP z420 workstation we need save the smbios physical
address.  The kernel boot sequence proceeds in the following order.
Step 2 requires efi.smbios to be the physical address.  However, I found
that on HP z420 EFI system table has a virtual address of SMBIOS in step
1.  Hence, we need set it back to the physical address with the smbios
in efi_setup_data.  (When it is still the physical address, it simply
sets the same value.)

1. efi_init() - Set efi.smbios from EFI system table
2. dmi_scan_machine() - Temporary map efi.smbios to access SMBIOS table
3. efi_enter_virtual_mode() - Map EFI ranges

Tested on ovmf+qemu, lenovo thinkpad, a dell laptop and an
HP z420 workstation.
Signed-off-by: NDave Young <dyoung@redhat.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

kexec kernel will need exactly same mapping for EFI runtime memory
ranges. Thus here export the runtime ranges mapping to sysfs,
kexec-tools will assemble them and pass to 2nd kernel via setup_data.

Introducing a new directory /sys/firmware/efi/runtime-map just like
/sys/firmware/memmap. Containing below attribute in each file of that
directory:

attribute  num_pages  phys_addr  type  virt_addr
Signed-off-by: NDave Young <dyoung@redhat.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Export fw_vendor, runtime and config table physical addresses to
/sys/firmware/efi/{fw_vendor,runtime,config_table} because kexec kernels
need them.

From EFI spec these 3 variables will be updated to virtual address after
entering virtual mode. But kernel startup code will need the physical
address.
Signed-off-by: NDave Young <dyoung@redhat.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add two small functions:
efi_merge_regions() and efi_map_regions(), efi_enter_virtual_mode()
calls them instead of embedding two long for loop.
Signed-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Current code check boot service region with kernel text region by:
start+size >= __pa_symbol(_text)
The end of the above region should be start + size - 1 instead.

I see this problem in ovmf + Fedora 19 grub boot:
text start: 1000000 md start: 800000 md size: 800000
Signed-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Kexec kernel will use saved runtime virtual mapping, so add a new
function efi_map_region_fixed() for directly mapping a md to md->virt.

The md is passed in from 1st kernel, the virtual addr is saved in
md->virt_addr.
Signed-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

variables size and end is useless in this function, thus remove them.
Reported-by: NToshi Kani <toshi.kani@hp.com>
Tested-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Consider a kernel crash in a module, simulated the following way:

 static int my_init(void)
 {
         char *map = (void *)0x5;
         *map = 3;
         return 0;
 }
 module_init(my_init);

When we turn off FRAME_POINTERs, the very first instruction in
that function causes a BUG. The problem is that we print IP in
the BUG report using %pB (from printk_address). And %pB
decrements the pointer by one to fix printing addresses of
functions with tail calls.

This was added in commit 71f9e598 ("x86, dumpstack: Use
%pB format specifier for stack trace") to fix the call stack
printouts.

So instead of correct output:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000005
  IP: [<ffffffffa01ac000>] my_init+0x0/0x10 [pb173]

We get:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000005
  IP: [<ffffffffa0152000>] 0xffffffffa0151fff

To fix that, we use %pS only for stack addresses printouts (via
newly added printk_stack_address) and %pB for regs->ip (via
printk_address). I.e. we revert to the old behaviour for all
except call stacks. And since from all those reliable is 1, we
remove that parameter from printk_address.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: joe@perches.com
Cc: jirislaby@gmail.com
Link: http://lkml.kernel.org/r/1382706418-8435-1-git-send-email-jslaby@suse.czSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit 8eba1842.

uv_trace() is not used by anything, nor is uv_trace_nmi_func, nor
uv_trace_func.

That's not how we do instrumentation code in the kernel: we add
tracepoints, printk()s, etc. so that everyone not just those with
magic kernel modules can debug a system.

So remove this unused (and misguied) piece of code.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/n/tip-tumfBffmr4jmnt8Gyxanoblg@git.kernel.org

The commit 712b6aa8 [Nov7 linux-next
via tip/auto-latest] ("intel_mid: Renamed *mrst* to *intel_mid*")
adds a __cpuinit.

We removed this a couple versions ago; we now want to remove
the compat no-op stubs.  Introducing new users is not what
we want to see at this point in time, as it will break once
the stubs are gone.

Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1383849290-11250-1-git-send-email-paul.gortmaker@windriver.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Check it just in case. We might just as well panic there because runtime
won't be functioning anyway.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We map the EFI regions needed for runtime services non-contiguously,
with preserved alignment on virtual addresses starting from -4G down
for a total max space of 64G. This way, we provide for stable runtime
services addresses across kernels so that a kexec'd kernel can still use
them.

Thus, they're mapped in a separate pagetable so that we don't pollute
the kernel namespace.

Add an efi= kernel command line parameter for passing miscellaneous
options and chicken bits from the command line.

While at it, add a chicken bit called "efi=old_map" which can be used as
a fallback to the old runtime services mapping method in case there's
some b0rkage with a particular EFI implementation (haha, it is hard to
hold up the sarcasm here...).

Also, add the UEFI RT VA space to Documentation/x86/x86_64/mm.txt.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

... and lose one #ifdef .. #endif sandwich.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It's incredibly difficult to diagnose early EFI boot issues without
special hardware because earlyprintk=vga doesn't work on EFI systems.

Add support for writing to the EFI framebuffer, via earlyprintk=efi,
which will actually give users a chance of providing debug output.

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

As Intel rolling out more SoC's after Moorestown, we need to
re-structure the code in a way that is backward compatible and easy to
expand. This patch implements a flexible way to support multiple boards
and devices.

This patch does not add any new functional support. It just refactors
the existing code to increase the modularity and decrease the code
duplication for supporting multiple soc's and boards.

Currently intel-mid.c has both board and soc related code in one file.
This patch moves the board related code to new files and let linker
script to create SFI devite table following this:

1. Move the SFI device specific code to
   arch/x86/platform/intel-mid/device-libs/platform_<device>.*
   A new device file is added for every supported device. This code will
   get conditionally compiled by using corresponding device driver
   CONFIG option.

2. Move the device_ids location to .x86_intel_mid_dev.init section by
   using new sfi_device() macro.

This patch was based on previous code from Sathyanarayanan Kuppuswamy.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-13-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Intel mid sfi code doesn't need struct devs_id.get_platform_data != NULL.
If the callback is not set, just assume there is no platform_data.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-11-git-send-email-david.a.cohen@linux.intel.com
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Moved SFI specific parsing/handling code to sfi.c. This will enable us
to reuse our intel-mid code for platforms that supports firmware
interfaces other than SFI (like ACPI).
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-10-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Added a custom handler for medfield based ipc devices and
moved devs_id structure defintion to header file.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-9-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch provides a means to add custom handler for
SFI devices. If you set device_handler as NULL in
device_id table standard SFI device handler will be used.
If its not NULL custom handler will be called.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-8-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

SFI device_id[] table parsing code is duplicated in every SFI
device handler. This patch removes this code duplication, by
adding a seperate function get_device_id() to parse through the
device table. Also this patch moves the SPI, I2C, IPC info code from
sfi_parse_devs() to respective device handlers.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-7-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.

This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.

To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Following files contains code that is common to all intel mid
soc's. So renamed them as below.

mrst/mrst.c              -> intel-mid/intel-mid.c
mrst/vrtc.c              -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c               -> pci/intel_mid_pci.c

Also, renamed the corresponding header files and made changes
to the driver files that included these header files.

To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Fixed indentation issues reported by checkpatch script in
mrst related files.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-3-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Fixed printk and pr_* related issues in mrst related files.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-2-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Incorrect use of 0 in terminating entry of arch_tables[] causes the
following sparse warning,

  arch/x86/platform/efi/efi.c:74:27: sparse: Using plain integer as NULL pointer

Replace with NULL.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
[ Included sparse warning in commit message. ]
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch restores the capability to enter KDB (and KGDB) from
the UV NMI handler.  This is needed because the UV system
console is not capable of sending the 'break' signal to the
serial console port.  It is also useful when the kernel is hung
in such a way that it isn't responding to normal external I/O,
so sending 'g' to sysreq-trigger does not work either.

Another benefit of the external NMI command is that all the cpus
receive the NMI signal at roughly the same time so they are more
closely aligned timewise.

It utilizes the newly added kgdb_nmicallin function to gain
entry to KGDB/KDB by the master.  The slaves still enter via the
standard kgdb_nmicallback function.  It also uses the new
'send_ready' pointer to tell KGDB/KDB to signal the slaves when
to proceed into the KGDB slave loop.

It is enabled when the nmi action is set to "kdb" and the kernel
is built with CONFIG_KDB enabled.  Note that if kgdb is
connected that interface will be used instead.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20131002151418.089692683@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

__initdata tag should be placed between the variable name and
equal sign for the variable to be placed in the intended
.init.data section.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Link: http://lkml.kernel.org/r/18427893.G5JGWn465D@amdc1032Signed-off-by: NIngo Molnar <mingo@kernel.org>

GCC warned about:

   arch/x86/platform/uv/uv_nmi.c: In function ‘uv_nmi_setup’:
   arch/x86/platform/uv/uv_nmi.c:664:2: warning: the address of ‘uv_nmi_cpu_mask’ will always evaluate as ‘true’

The reason is this code:

        alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL);
        BUG_ON(!uv_nmi_cpu_mask);

which is not the way to check for alloc_cpumask_var() failures - its
return code should be checked instead.

Cc: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/n/tip-2pXRemsjupmvonbpmmnzleo1@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds support for the uvtrace module by providing a
skeleton call to the registered trace function.  It also
provides another separate 'NMI' tracer that is triggered by the
system wide 'power nmi' command.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212501.185052551@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If a system has hung and it no longer responds to external
events, this patch adds the capability of doing a standard kdump
and system reboot then triggered by the system NMI command.

It is enabled when the nmi action is changed to "kdump" and the
kernel is built with CONFIG_KEXEC enabled.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.660567460@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The standard NMI handler dumps the states of all the cpus.  This
includes a full register dump and stack trace.  This can be way
more information than what is needed.  This patch adds a
"summary" dump that is basically a form of the "ps" command.  It
includes the symbolic IP address as well as the command field
and basic process information.

It is enabled when the nmi action is changed to "ips".
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.507922930@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The current UV NMI handler has not been updated for the changes
in the system NMI handler and the perf operations.  The UV NMI
handler reads an MMR in the UV Hub to check to see if the NMI
event was caused by the external 'system NMI' that the operator
can initiate on the System Mgmt Controller.

The problem arises when the perf tools are running, causing
millions of perf events per second on very large CPU count
systems.  Previously this was okay because the perf NMI handler
ran at a higher priority on the NMI call chain and if the NMI
was a perf event, it would stop calling other NMI handlers
remaining on the NMI call chain.

Now the system NMI handler calls all the handlers on the NMI
call chain including the UV NMI handler.  This causes the UV NMI
handler to read the MMRs at the same millions per second rate.
This can lead to significant performance loss and possible
system failures.  It also can cause thousands of 'Dazed and
Confused' messages being sent to the system console.  This
effectively makes perf tools unusable on UV systems.

To avoid this excessive overhead when perf tools are running,
this code has been optimized to minimize reading of the MMRs as
much as possible, by moving to the NMI_UNKNOWN notifier chain.
This chain is called only when all the users on the standard
NMI_LOCAL call chain have been called and none of them have
claimed this NMI.

There is an exception where the NMI_LOCAL notifier chain is
used.  When the perf tools are in use, it's possible that the UV
NMI was captured by some other NMI handler and then either
ignored or mistakenly processed as a perf event.  We set a
per_cpu ('ping') flag for those CPUs that ignored the initial
NMI, and then send them an IPI NMI signal.  The NMI_LOCAL
handler on each cpu does not need to read the MMR, but instead
checks the in memory flag indicating it was pinged.  There are
two module variables, 'ping_count' indicating how many requested
NMI events occurred, and 'ping_misses' indicating how many stray
NMI events.  These most likely are perf events so it shows the
overhead of the perf NMI interrupts and how many MMR reads were avoided.

This patch also minimizes the reads of the MMRs by having the
first cpu entering the NMI handler on each node set a per HUB
in-memory atomic value.  (Having a per HUB value avoids sending
lock traffic over NumaLink.)  Both types of UV NMIs from the SMI
layer are supported.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch moves the UV NMI support from the x2apic file to a
new separate uv_nmi.c file in preparation for the next sequence
of patches. It prevents upcoming bloat of the x2apic file, and
has the added benefit of putting the upcoming /sys/module
parameters under the name 'uv_nmi' instead of 'x2apic_uv_x',
which was obscure.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NDimitri Sivanich <sivanich@sgi.com>
Reviewed-by: NHedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.183295611@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

acpi_execute_simple_method() is a new ACPI API introduced to invoke
an ACPI control method that has single integer parameter and no return value.

Convert acpi_evaluate_object() to acpi_execute_simple_method()
in arch/x86/platform/olpc/olpc-xo15-sci.c
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
CC: Daniel Drake <dsd@laptop.org>
CC: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add patch to fix 32bit EFI service mapping (rhbz 726701)

Multiple people are reporting hitting the following WARNING on i386,

  WARNING: at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x3d3/0x440()
  Modules linked in:
  Pid: 0, comm: swapper Not tainted 3.9.0-rc7+ #95
  Call Trace:
   [<c102b6af>] warn_slowpath_common+0x5f/0x80
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440
   [<c102b6ed>] warn_slowpath_null+0x1d/0x20
   [<c1023fb3>] __ioremap_caller+0x3d3/0x440
   [<c106007b>] ? get_usage_chars+0xfb/0x110
   [<c102d937>] ? vprintk_emit+0x147/0x480
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c102406a>] ioremap_cache+0x1a/0x20
   [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de
   [<c1418593>] efi_enter_virtual_mode+0x1e4/0x3de
   [<c1407984>] start_kernel+0x286/0x2f4
   [<c1407535>] ? repair_env_string+0x51/0x51
   [<c1407362>] i386_start_kernel+0x12c/0x12f

Due to the workaround described in commit 916f676f ("x86, efi: Retain
boot service code until after switching to virtual mode") EFI Boot
Service regions are mapped for a period during boot. Unfortunately, with
the limited size of the i386 direct kernel map it's possible that some
of the Boot Service regions will not be directly accessible, which
causes them to be ioremap()'d, triggering the above warning as the
regions are marked as E820_RAM in the e820 memmap.

There are currently only two situations where we need to map EFI Boot
Service regions,

  1. To workaround the firmware bug described in 916f676f
  2. To access the ACPI BGRT image

but since we haven't seen an i386 implementation that requires either,
this simple fix should suffice for now.

[ Added to changelog - Matt ]
Reported-by: NBryan O'Donoghue <bryan.odonoghue.lkml@nexus-software.ie>
Acked-by: NTom Zanussi <tom.zanussi@intel.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

efi_lookup_mapped_addr() is a handy utility for other platforms than
x86. Move it from arch/x86 to drivers/firmware. Add memmap pointer
to global efi structure, and initialise it on x86.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Common to (U)EFI support on all platforms is the global "efi" data
structure, and the code that parses the System Table to locate
addresses to populate that structure with.

This patch adds both of these to the global EFI driver code and
removes the local definition of the global "efi" data structure from
the x86 and ia64 code.

Squashed into one big patch to avoid breaking bisection.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch moves the pca953x.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Fix the build:

  arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup':
  arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function)
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>