- 22 2月, 2012 1 次提交
-
-
由 Eric Paris 提交于
Both bugs being fixed were introduced in: 29ef73b7 Include linux/audit.h to fix below build errors: CC arch/arm/kernel/ptrace.o arch/arm/kernel/ptrace.c: In function 'syscall_trace': arch/arm/kernel/ptrace.c:919: error: implicit declaration of function 'audit_syscall_exit' arch/arm/kernel/ptrace.c:921: error: implicit declaration of function 'audit_syscall_entry' arch/arm/kernel/ptrace.c:921: error: 'AUDIT_ARCH_ARMEB' undeclared (first use in this function) arch/arm/kernel/ptrace.c:921: error: (Each undeclared identifier is reported only once arch/arm/kernel/ptrace.c:921: error: for each function it appears in.) make[1]: *** [arch/arm/kernel/ptrace.o] Error 1 make: *** [arch/arm/kernel] Error 2 This part of the patch is: Reported-by: NAxel Lin <axel.lin@gmail.com> Reported-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> (They both provided patches to fix it) This patch also (at the request of the list) fixes the fact that ARM has both LE and BE versions however the audit code was called as if it was always BE. If audit userspace were to try to interpret the bits it got from a LE system it would obviously do so incorrectly. Fix this by using the right arch flag on the right system. This part of the patch is: Reported-by: NRussell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 2月, 2012 3 次提交
-
-
由 Russell King 提交于
The voltage domain code wants the voltage tables, which are in the opp*.c files. These files aren't built when PM_OPP is disabled, causing the following build errors at link time: twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data' twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data' twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data' twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data' twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data' Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Myron Stowe 提交于
The patch series to re-factor PCI's 'latency timer' setup (re: http://marc.info/?l=linux-kernel&m=131983853831049&w=2) forgot to remove the ARM specific definition of 'pcibios_max_latency' once such had been moved into the pci core resulting in ARM related compile errors - drivers/built-in.o:(.data+0x230): multiple definition of `pcibios_max_latency' arch/arm/common/built-in.o:(.data+0x40c): first defined here make[1]: *** [vmlinux.o] Error 1 In the series, patch 2/16 (commit 168c8619) converted the ARM specific version of 'pcibios_set_master()' to a non-inlined version. This was done in preperation for hosting it up into PCI's core, which was done in patch 10/16 (commit 96c55900) of the series (and where the removal of ARM's 'pcibios_max_latency' was overlooked). Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
Current ARM local timer code registers CPUFREQ notifiers even in case the twd_timer_setup() isn't called. That seems to be wrong and would eventually lead to kernel crash on the CPU frequency transitions on the SOCs where the local timer doesn't exist or broken because of hardware BUG. Fix it by testing twd_evt and *__this_cpu_ptr(twd_evt). The issue was observed with v3.3-rc3 and building an OMAP2+ kernel on OMAP3 SOC which doesn't have TWD. Below is the dump for reference : Unable to handle kernel paging request at virtual address 007e900 pgd = cdc20000 [007e9000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP Modules linked in: CPU: 0 Not tainted (3.3.0-rc3-pm+debug+initramfs #9) PC is at twd_update_frequency+0x34/0x48 LR is at twd_update_frequency+0x10/0x48 pc : [<c001382c>] lr : [<c0013808>] psr: 60000093 sp : ce311dd8 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000001 r8 : ce310000 r7 : c0440458 r6 : c00137f8 r5 : 00000000 r4 : c0947a74 r3 : 00000000 r2 : 007e9000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment usr Control: 10c5387d Table: 8dc20019 DAC: 00000015 Process sh (pid: 599, stack limit = 0xce3102f8) Stack: (0xce311dd8 to 0xce312000) 1dc0: 6000c 1de0: 00000001 00000002 00000000 00000000 00000000 00000000 00000 1e00: ffffffff c093d8f0 00000000 ce311ebc 00000001 00000001 ce310 1e20: c001386c c0437c4c c0e95b60 c0e95ba8 00000001 c0e95bf8 ffff4 1e40: 00000000 00000000 c005ef74 ce310000 c0435cf0 ce311ebc 00000 1e60: ce352b40 0007a120 c08d5108 c08ba040 c08ba040 c005f030 00000 1e80: c08bc554 c032fe2c 0007a120 c08d4b64 ce352b40 c08d8618 ffff8 1ea0: c08ba040 c033364c ce311ecc c0433b50 00000002 ffffffea c0330 1ec0: 0007a120 0007a120 22222201 00000000 22222222 00000000 ce357 1ee0: ce3d6000 cdc2aed8 ce352ba0 c0470164 00000002 c032f47c 00034 1f00: c0331cac ce352b40 00000007 c032f6d0 ce352bbc 0003d090 c0930 1f20: c093d8bc c03306a4 00000007 ce311f80 00000007 cdc2aec0 ce358 1f40: ce8d20c0 00000007 b6fe5000 ce311f80 00000007 ce310000 0000c 1f60: c000de74 ce987400 ce8d20c0 b6fe5000 00000000 00000000 0000c 1f80: 00000000 00000000 001fbac8 00000000 00000007 001fbac8 00004 1fa0: c000df04 c000dd60 00000007 001fbac8 00000001 b6fe5000 00000 1fc0: 00000007 001fbac8 00000007 00000004 b6fe5000 00000000 00202 1fe0: 00000000 beb565f8 00101ffc 00008e8c 60000010 00000001 00000 [<c001382c>] (twd_update_frequency+0x34/0x48) from [<c008ac4c>] ) [<c008ac4c>] (smp_call_function_single+0x17c/0x1c8) from [<c0013) [<c0013890>] (twd_cpufreq_transition+0x24/0x30) from [<c0437c4c>) [<c0437c4c>] (notifier_call_chain+0x44/0x84) from [<c005efe4>] () [<c005efe4>] (__srcu_notifier_call_chain+0x70/0xa4) from [<c005f) [<c005f030>] (srcu_notifier_call_chain+0x18/0x20) from [<c032fe2) [<c032fe2c>] (cpufreq_notify_transition+0xc8/0x1b0) from [<c0333) [<c033364c>] (omap_target+0x1b4/0x28c) from [<c032f47c>] (__cpuf) [<c032f47c>] (__cpufreq_driver_target+0x50/0x64) from [<c0331d24) [<c0331d24>] (cpufreq_set+0x78/0x98) from [<c032f6d0>] (store_sc) [<c032f6d0>] (store_scaling_setspeed+0x5c/0x74) from [<c03306a4>) [<c03306a4>] (store+0x58/0x74) from [<c014d868>] (sysfs_write_fi) [<c014d868>] (sysfs_write_file+0x80/0xb4) from [<c00f2c2c>] (vfs) [<c00f2c2c>] (vfs_write+0xa8/0x138) from [<c00f2e9c>] (sys_write) [<c00f2e9c>] (sys_write+0x40/0x6c) from [<c000dd60>] (ret_fast_s) Code: e594300c e792210c e1a01000 e5840004 (e7930002) ---[ end trace 5da3b5167c1ecdda ]--- Reported-by: NKevin Hilman <khilman@ti.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Tested-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 2月, 2012 4 次提交
-
-
由 Olof Johansson 提交于
For files that include asm/processor.h but not asm/system.h: arch/arm/mach-msm/include/mach/uncompress.h: In function 'putc': arch/arm/mach-msm/include/mach/uncompress.h:48:3: error: implicit declaration of function 'smp_mb' [-Werror=implicit-function-declaration] In this case, smp_mb() is from the cpu_relax() call in the msm putc(). It likely went uncaught when the uncompress.h change went in since the defconfig didn't enable that code path, but later changes (e76f4750: ARM: debug: arrange Kconfig options more logically) resulted in the option being on for msm_defconfig and thus exposed it. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Javi Merino 提交于
This fixes the thrd->req_running field being accessed before thrd is checked for null. The error was introduced in abb959f8: ARM: 7237/1: PL330: Fix driver freeze Reference: <1326458191-23492-1-git-send-email-mans.rullgard@linaro.org> Cc: stable@kernel.org Signed-off-by: NMans Rullgard <mans.rullgard@linaro.org> Acked-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Javi Merino 提交于
dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit field in the Channel Control Register (see Table 3-21 of the DMA-330 Technical Reference Manual) and should be programmed as such. Reference: <1320244259-10496-3-git-send-email-javi.merino@arm.com> Signed-off-by: NJavi Merino <javi.merino@arm.com> Acked-by: NJassi Brar <jassisinghbrar@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Bootup with lockdep enabled has been broken on v7 since b46c0f74 ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: NNicolas Pitre <nico@linaro.org> Acked-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 2月, 2012 7 次提交
-
-
由 Tony Lindgren 提交于
It turns out that many compilers don't show section warnings on ARM currently because handling for ARM_CALL relocs are missing from modpost.c. Based on commit c2e26114 ([ARM] 3205/1: Handle new EABI relocations when loading kernel modules) it seems that R_ARM_PC24, R_ARM_CALL and R_ARM_JUMP24 can be handled the same way. Note that at least Debian libc6-dev is missing defines for both R_ARM_CALL and R_ARM_JUMP24 in /usr/include/elf.h. So for now we need to define them in modpost.c if not defined. Acked-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
This patch expands the Kconfig dependencies for ARM_LPAE to not allow enabling when architectures other than ARMv7 are built into the kernel. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
One small bug fix from Axel plus a fix for a build failure in unrealistic but commonly built configs which for some reason manage to survive for an awfully long time in -next without any reports. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix getting voltage in max8649_enable_time() regulator: Fix mc13xxx regulator modular build (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Quoth BenH: "Here are a few powerpc fixes for 3.3, all pretty trivial. I also added the patch to define GET_IP/SET_IP so we can use some more asm-generic goodness." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries/eeh: Fix crash when error happens during device probe powerpc/pseries: Fix partition migration hang in stop_topology_update powerpc/powernv: Disable interrupts while taking phb->lock powerpc: Fix WARN_ON in decrementer_check_overflow powerpc/wsp: Fix IRQ affinity setting powerpc: Implement GET_IP/SET_IP powerpc/wsp: Permanently enable PCI class code workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
MMC fixes for 3.3-rc4: * The most visible fix here is against a regression introduced in 3.3-rc1 that ran cards in Ultra High Speed mode even when they failed to initialize in that mode, leading to lower-speed cards failing to mount. * A lockdep warning introduced in 3.3-rc1 is fixed. * Various other small driver fixes, most notably for a NULL dereference when using highmem with dw_mmc. * tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: dw_mmc: Fix PIO mode with support of highmem mmc: atmel-mci: save and restore sdioirq when soft reset is performed mmc: block: Init ro_lock sysfs attr to fix lockdep warnings mmc: sh_mmcif: fix late delayed work initialisation mmc: tmio_mmc: fix card eject during IO with DMA mmc: core: Fix comparison issue in mmc_compare_ext_csds mmc: core: Fix PowerOff Notify suspend/resume mmc: sdhci-pci: set Medfield SDIO as non-removable mmc: core: add the capability for broken voltage mmc: core: Fix low speed mmc card detection failure mmc: esdhc: set the timeout to the max value mmc: esdhc: add PIO mode support mmc: core: Ensure clocks are always enabled before host interaction mmc: of_mmc_spi: fix little endian support mmc: core: UHS sdio card that fails should not exceed 50MHz mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Two fixes for VCPU offlining; One to fix the string format exposed by the xen-pci[front|back] to conform to the one used in majority of PCI drivers; Two fixes to make the code more resilient to invalid configurations. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> * tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_dev: add missing error check to watch handling xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
sound fixes for 3.3-rc4 Basically all small fixes suited as rc4: a few HD-audio regression fixes, a stable fix for an old Dell laptop with intel8x0, and a simple fix for ASoC fsi. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: intel8x0: Fix default inaudible sound on Gateway M520 ALSA: hda - Fix silent speaker output on Acer Aspire 6935 ALSA: hda - Fix initialization of secondary capture source on VT1705 ASoC: fsi: fixup fsi_pointer() calculation method ALSA: hda - Fix mute-LED VREF value for new HP laptops
-
- 14 2月, 2012 25 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by: NBenjamin Carlson <elderbubba0810@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
A simple fix from Morimoto-san for the pointer() operation in the FSI driver.
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.samba.org/sfrench/cifs-2.6: cifs: don't return error from standard_receive3 after marking response malformed cifs: request oplock when doing open on lookup cifs: fix error handling when cifscreds key payload is an error
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
This updates the sha512 fix so that it doesn't cause excessive stack usage on i386. This is done by reverting to the original code, and avoiding the W duplication by moving its initialisation into the loop. As the underlying code is in fact the one that we have used for years, I'm pushing this now instead of postponing to the next cycle. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - Avoid stack bloat on i386 crypto: sha512 - Use binary and instead of modulus
-
EEH may happen during a PCI driver probe. If the driver is trying to access some register in a loop, the EEH code will try to print the driver name. But the driver pointer in struct pci_dev is not set until probe returns successfully. Use a function to test if the device and the driver pointer is NULL before accessing the driver's name. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Brian King 提交于
This fixes a hang that was observed during live partition migration. Since stop_topology_update must not be called from an interrupt context, call it earlier in the migration process. The hang observed can be seen below: WARNING: at kernel/timer.c:1011 Modules linked in: ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop ibmveth sg ext3 jbd mbcache raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc dm_round_robin dm_multipath scsi_dh sd_mod crc_t10dif ibmvfc scsi_transport_fc scsi_tgt scsi_mod dm_snapshot dm_mod NIP: c0000000000c52d8 LR: c00000000004be28 CTR: 0000000000000000 REGS: c00000005ffd77d0 TRAP: 0700 Not tainted (3.2.0-git-00001-g07d106d0) MSR: 8000000000021032 <ME,CE,IR,DR> CR: 48000084 XER: 00000001 CFAR: c00000000004be20 TASK = c00000005ec78860[0] 'swapper/3' THREAD: c00000005ec98000 CPU: 3 GPR00: 0000000000000001 c00000005ffd7a50 c000000000fbbc98 c000000000ec8340 GPR04: 00000000282a0020 0000000000000000 0000000000004000 0000000000000101 GPR08: 0000000000000012 c00000005ffd4000 0000000000000020 c000000000f3ba88 GPR12: 0000000000000000 c000000007f40900 0000000000000001 0000000000000004 GPR16: 0000000000000001 0000000000000000 0000000000000000 c000000001022310 GPR20: 0000000000000001 0000000000000000 0000000000200200 c000000001029e14 GPR24: 0000000000000000 0000000000000001 0000000000000040 c00000003f74bc80 GPR28: c00000003f74bc84 c000000000f38038 c000000000f16b58 c000000000ec8340 NIP [c0000000000c52d8] .del_timer_sync+0x28/0x60 LR [c00000000004be28] .stop_topology_update+0x20/0x38 Call Trace: [c00000005ffd7a50] [c00000005ec78860] 0xc00000005ec78860 (unreliable) [c00000005ffd7ad0] [c00000000004be28] .stop_topology_update+0x20/0x38 [c00000005ffd7b40] [c000000000028378] .__rtas_suspend_last_cpu+0x58/0x260 [c00000005ffd7bf0] [c0000000000fa230] .generic_smp_call_function_interrupt+0x160/0x358 [c00000005ffd7cf0] [c000000000036ec8] .smp_ipi_demux+0x88/0x100 [c00000005ffd7d80] [c00000000005c154] .icp_hv_ipi_action+0x5c/0x80 [c00000005ffd7e00] [c00000000012a088] .handle_irq_event_percpu+0x100/0x318 [c00000005ffd7f00] [c00000000012e774] .handle_percpu_irq+0x84/0xd0 [c00000005ffd7f90] [c000000000022ba8] .call_handle_irq+0x1c/0x2c [c00000005ec9ba20] [c00000000001157c] .do_IRQ+0x22c/0x2a8 [c00000005ec9bae0] [c0000000000054bc] hardware_interrupt_entry+0x18/0x1c Exception: 501 at .cpu_idle+0x194/0x2f8 LR = .cpu_idle+0x194/0x2f8 [c00000005ec9bdd0] [c000000000017e58] .cpu_idle+0x188/0x2f8 (unreliable) [c00000005ec9be90] [c00000000067ec18] .start_secondary+0x3e4/0x524 [c00000005ec9bf90] [c0000000000093e8] .start_secondary_prolog+0x10/0x14 Instruction dump: ebe1fff8 4e800020 fbe1fff8 7c0802a6 f8010010 7c7f1b78 f821ff81 78290464 80090014 5400019e 7c0000d0 78000fe0 <0b000000> 4800000c 7c210b78 7c421378 Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
We need to disable interrupts when taking the phb->lock. Otherwise we could deadlock with pci_lock taken from an interrupt. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We use __get_cpu_var() which triggers a false positive warning in smp_processor_id() thinking interrupts are enabled (at this point, they are soft-enabled but hard-disabled). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We call the cache_hwirq_map() function with a linux IRQ number but it expects a HW irq number. This triggers a BUG on multic-chip setups in addition to not doing the right thing. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Srikar Dronamraju 提交于
With this change, helpers such as instruction_pointer() et al, get defined in the generic header in terms of GET_IP Removed the unnecessary definition of profile_pc in !CONFIG_SMP case as suggested by Mike Frysinger. Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
It appears that on the Chroma card, the class code of the root complex is still wrong even on DD2 or later chips. This could be a firmware issue, but that breaks resource allocation so let's unconditionally fix it up. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Seungwon Jeon 提交于
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Acked-by: NWill Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Ludovic Desroches 提交于
Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Rabin Vincent 提交于
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NJohan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: NUlf Hansson <ulf.hansson@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
If the driver is loaded with a card in the slot, mmc_add_host() will schedule an immediate card-detection work, which will start IO and wait for command completion. Usually the kernel first returns to the sh_mmcif probe function, lets it finish and only then schedules the rescan work. But sometimes, expecially under heavy system load, the work will be scheduled immediately before returning to the probe method. In this case it is important for the driver to be fully prepared for IO. For sh_mmcif this means, that also the timeout work has to be initialised before calling mmc_add_host(). It is also better to prepare interrupts beforehand. Besides, since mmc_add_host() does card-detection itself, there is no need to do it again immediately afterwards. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
When DMA is in use and the card is ejected during IO, DMA transfers have to be terminated, otherwise the dmaengine driver fails to operate properly, when the card is re-inserted. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jurgen Heeks 提交于
Found this issue during code review. Actually, there are two issues which both compensate together in lucky case. In unlucky case the bus width probing might not work as expected. Signed-off-by: NJurgen Heeks <jurgen.heeks@nokia.com> Reviewed-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Girish K S 提交于
Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: NGirish K S <girish.shivananjappa@linaro.org> Tested-by: NGirish K S <girish.shivananjappa@linaro.org> Reviewed-by: NSaugata Das <saugata.das@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Adrian Hunter 提交于
Set Medfield SDIO as non-removable to avoid un-necessary card detect activity. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jaehoon Chung 提交于
There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Girish K S 提交于
This patch fixes the failure of low speed mmc card detection. Signed-off-by: NGirish K S <girish.shivananjappa@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jerry Huang 提交于
When accessing the card on some FSL platform boards (e.g p2020, p1010, mpc8536), the following error is reported with the timeout value calculated: mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. So we skip the calculation of timeout and use the max value to fix it. Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: NGao Guanhua <B22826@freescale.com> Signed-off-by: NXie Xiaobo <X.Xie@freescale.com> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jerry Huang 提交于
For some FSL ESDHC controllers (e.g. P2020E, Rev1.0), the SDHC can not work on DMA mode because of the hardware bug, so we set a broken dma flag and use PIO mode. Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: NGao Guanhua <B22826@freescale.com> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Sujit Reddy Thumma 提交于
Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NPer Forlin <per.forlin@stericsson.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
The voltage_ranges is supposed to switch from big endian to little endian. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NChris Ball <cjb@laptop.org>
-