Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 06 7月, 2012 2 次提交
  3. 01 7月, 2012 1 次提交
  5. 30 6月, 2012 1 次提交
  7. 29 6月, 2012 1 次提交
    • K
      printk: flush continuation lines immediately to console · 084681d1
      由 Kay Sievers 提交于 
      Continuation lines are buffered internally, intended to merge the
chunked printk()s into a single record, and to isolate potentially
racy continuation users from usual terminated line users.

This though, has the effect that partial lines are not printed to
the console in the moment they are emitted. In case the kernel
crashes in the meantime, the potentially interesting printed
information would never reach the consoles.

Here we share the continuation buffer with the console copy logic,
and partial lines are always immediately flushed to the available
consoles. They are still buffered internally to improve the
readability and integrity of the messages and minimize the amount
of needed record headers to store.
Signed-off-by: NKay Sievers <kay@vrfy.org>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      084681d1
  9. 27 6月, 2012 2 次提交
  11. 26 6月, 2012 2 次提交
  13. 21 6月, 2012 4 次提交
  15. 19 6月, 2012 1 次提交
  17. 18 6月, 2012 1 次提交
    • S
      perf: Use css_tryget() to avoid propping up css refcount · 9c5da09d
      由 Salman Qazi 提交于 
      An rmdir pushes css's ref count to zero.  However, if the associated
directory is open at the time, the dentry ref count is non-zero.  If
the fd for this directory is then passed into perf_event_open, it
does a css_get().  This bounces the ref count back up from zero.  This
is a problem by itself.  But what makes it turn into a crash is the
fact that we end up doing an extra dput, since we perform a dput
when css_put sees the ref count go down to zero.

css_tryget() does not fall into that trap. So, we use that instead.

Reproduction test-case for the bug:

 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <linux/unistd.h>
 #include <linux/perf_event.h>
 #include <string.h>
 #include <errno.h>
 #include <stdio.h>

 #define PERF_FLAG_PID_CGROUP    (1U << 2)

 int perf_event_open(struct perf_event_attr *hw_event_uptr,
                     pid_t pid, int cpu, int group_fd, unsigned long flags) {
         return syscall(__NR_perf_event_open,hw_event_uptr, pid, cpu,
                 group_fd, flags);
 }

 /*
  * Directly poke at the perf_event bug, since it's proving hard to repro
  * depending on where in the kernel tree.  what moved?
  */
 int main(int argc, char **argv)
 {
        int fd;
        struct perf_event_attr attr;
        memset(&attr, 0, sizeof(attr));
        attr.exclude_kernel = 1;
        attr.size = sizeof(attr);
        mkdir("/dev/cgroup/perf_event/blah", 0777);
        fd = open("/dev/cgroup/perf_event/blah", O_RDONLY);
        perror("open");
        rmdir("/dev/cgroup/perf_event/blah");
        sleep(2);
        perf_event_open(&attr, fd, 0, -1,  PERF_FLAG_PID_CGROUP);
        perror("perf_event_open");
        close(fd);
        return 0;
 }
Signed-off-by: NSalman Qazi <sqazi@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20120614223108.1025.2503.stgit@dungbeetle.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9c5da09d
  19. 16 6月, 2012 3 次提交
  21. 14 6月, 2012 2 次提交
    • D
      watchdog: Quiet down the boot messages · a7027046
      由 Don Zickus 提交于 
      A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).

This is my attempt to quiet them down and keep it less confusing
for the end user.  What I did is print the message for cpu0 and
save it for future comparisons.  If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simplified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: NNathan Zimmer <nzimmer@sgi.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a7027046
    • E
      splice: fix racy pipe->buffers uses · 047fe360
      由 Eric Dumazet 提交于 
      Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()

commit 35f3d14d (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.

Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.

Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.

splice_shrink_spd() loses its struct pipe_inode_info argument.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Cc: stable <stable@vger.kernel.org> # 2.6.35
Tested-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      047fe360
  23. 13 6月, 2012 1 次提交
  25. 09 6月, 2012 1 次提交
    • R
      sched/fair: fix lots of kernel-doc warnings · cd96891d
      由 Randy Dunlap 提交于 
      Fix lots of new kernel-doc warnings in kernel/sched/fair.c:

  Warning(kernel/sched/fair.c:3625): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3625): Excess function parameter 'sd' description in 'update_sg_lb_stats'
  Warning(kernel/sched/fair.c:3735): No description found for parameter 'env'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'sd' description in 'update_sd_pick_busiest'
  Warning(kernel/sched/fair.c:3735): Excess function parameter 'this_cpu' description in 'update_sd_pick_busiest'
  .. more warnings
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cd96891d
  27. 08 6月, 2012 6 次提交
  29. 07 6月, 2012 6 次提交
  31. 06 6月, 2012 6 次提交