- 02 9月, 2014 7 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
dev_hard_start_xmit() does two things, it first validates and canonicalizes the SKB, then it actually sends it. Make a set of helper functions for doing the first part. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
For now it will always be false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
There is a slight policy change happening here as well. The previous code would drop the entire rest of the GSO skb if any of them got, for example, a congestion notification. That makes no sense, anything NET_XMIT_MASK and below is something like congestion or policing. And in the congestion case it doesn't even mean the packet was actually dropped. Just continue until dev_xmit_complete() evaluates to false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hopefully making the code a bit easier to read and digest. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
That way we don't have to audit every call site to make sure it is doing this properly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2014 5 次提交
-
-
由 Tom Herbert 提交于
CHECKSUM_UNNECESSARY may be applied to the SCTP CRC so we need to appropriate account for this by decrementing csum_level. This is done by calling __skb_dec_checksum_unnecessary. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Allow GRO path to "consume" checksums provided in CHECKSUM_UNNECESSARY and to report new checksums verfied for use in fallback to normal path. Change GRO checksum path to track csum_level using a csum_cnt field in NAPI_GRO_CB. On GRO initialization, if ip_summed is CHECKSUM_UNNECESSARY set NAPI_GRO_CB(skb)->csum_cnt to skb->csum_level + 1. For each checksum verified, decrement NAPI_GRO_CB(skb)->csum_cnt while its greater than zero. If a checksum is verfied and NAPI_GRO_CB(skb)->csum_cnt == 0, we have verified a deeper checksum than originally indicated in skbuf so increment csum_level (or initialize to CHECKSUM_UNNECESSARY if ip_summed is CHECKSUM_NONE or CHECKSUM_COMPLETE). Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
This patch: - Clarifies the specific requirements of devices returning CHECKSUM_UNNECESSARY (comments in skbuff.h). - Adds csum_level field to skbuff. This is used to express how many checksums are covered by CHECKSUM_UNNECESSARY (stores n - 1). This replaces the overloading of skb->encapsulation, that field is is now only used to indicate inner headers are valid. - Change __skb_checksum_validate_needed to "consume" each checksum as indicated by csum_level as layers of the the packet are parsed. - Remove skb_pop_rcv_encapsulation, no longer needed in the new csum_level model. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
Commit 6c9808ce ("tipc: remove port_lock") accidentally involves a potential bug: when tipc socket instance(tsk) is not got with given reference number in tipc_sk_get(), tsk is set to NULL. Subsequently we jump to exit label where to decrease socket reference counter pointed by tsk pointer in tipc_sk_put(). However, As now tsk is NULL, oops may happen because of touching a NULL pointer. Signed-off-by: NYing Xue <ying.xue@windriver.com> Acked-by: NErik Hugne <erik.hugne@ericsson.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Replace occurences of skb_get_queue_mapping() and follow-up netdev_get_tx_queue() with an actual helper function. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2014 10 次提交
-
-
由 Florian Fainelli 提交于
Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add support for the 4-bytes Broadcom tag that built-in switches such as the Starfighter 2 might insert when receiving packets, or that we need to insert while targetting specific switch ports. We use a fake local EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure we can assign DSA-specific network operations within the DSA drivers. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Allow switch drivers to hook a PHY link update callback to perform port-specific link work. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Whenever libphy determines that the link status of a given PHY/port has changed, allow to call into the switch driver link adjustment callback so proper actions can be taken care of by the switch driver upon link notification. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In case switch port tagging is disabled (voluntarily, or the switch just does not support it), allow us to continue using the defined set of dsa_device_ops in net/dsa/slave.c. We introduce dsa_protocol_is_tagged() to check whether we need to override skb->protocol and go through the DSA-specifif packet_type function, or if we just go on and receive the SKB through the normal path. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We will later use the per-port device_node pointer to fetch a bunch of port-specific properties. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We might need to fetch additional resources from the device tree node pointer, such as register ranges or other properties. Keep a device_node pointer around for this. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
only written once. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2014 2 次提交
-
-
由 WANG Cong 提交于
Fixes: commit 690e36e7 (net: Allow raw buffers to be passed into the flow dissector) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Fixes: commit 690e36e7 (net: Allow raw buffers to be passed into the flow dissector) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2014 9 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. This patch removes some blank lines between the end of a function definition and the EXPORT_SYMBOL_GPL macro in order to prevent checkpatch warning that EXPORT_SYMBOL must immediately follow a function. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. This patch addresses structure definitions, specifically it cleanses the brace placement and replaces spaces with tabs in a few places. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
In GRE demux if the GRE checksum pop rcv encapsulation so that any encapsulated checksums are treated as tunnel checksums. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Implement GRO for UDPv6. Add UDP checksum verification in gro_receive for both UDP4 and UDP6 calling skb_gro_checksum_validate_zero_check. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
In tcp[64]_gro_receive call skb_gro_checksum_validate to validate TCP checksum in the gro context. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add skb_gro_checksum_validate, skb_gro_checksum_validate_zero_check, and skb_gro_checksum_simple_validate, and __skb_gro_checksum_complete. These are the cognates of the normal checksum functions but are used in the gro_receive path and operate on GRO related fields in sk_buffs. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2014 7 次提交
-
-
由 Daniel Borkmann 提交于
Replace open codings of (((u64) <x> * <y>) >> 32) with reciprocal_scale(). Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Drivers, and perhaps other entities we have not yet considered, sometimes want to know how deep the protocol headers go before deciding how large of an SKB to allocate and how much of the packet to place into the linear SKB area. For example, consider a driver which has a device which DMAs into pools of pages and then tells the driver where the data went in the DMA descriptor(s). The driver can then build an SKB and reference most of the data via SKB fragments (which are page/offset/length triplets). However at least some of the front of the packet should be placed into the linear SKB area, which comes before the fragments, so that packet processing can get at the headers efficiently. The first thing each protocol layer is going to do is a "pskb_may_pull()" so we might as well aggregate as much of this as possible while we're building the SKB in the driver. Part of supporting this is that we don't have an SKB yet, so we want to be able to let the flow dissector operate on a raw buffer in order to compute the offset of the end of the headers. So now we have a __skb_flow_dissect() which takes an explicit data pointer and length. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We complete the merging of the port and socket layer by aggregating the fields of struct tipc_port directly into struct tipc_sock, and moving the combined structure into socket.c. We also move all functions and macros that are not any longer exposed to the rest of the stack into socket.c, and rename them accordingly. Despite the size of this commit, there are no functional changes. We have only made such changes that are necessary due of the removal of struct tipc_port. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The reference table is now 'socket aware' instead of being generic, and has in reality become a socket internal table. In order to be able to minimize the API exposed by the socket layer towards the rest of the stack, we now move the reference table definitions and functions into the file socket.c, and rename the functions accordingly. There are no functional changes in this commit. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We move the inline functions in the file port.h to socket.c, and modify their names accordingly. We move struct tipc_port and some macros to socket.h. Finally, we remove the file port.h. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In this commit, we move the remaining functions in port.c to socket.c, and give them new names that correspond to their new location. We then remove the file port.c. There are only cosmetic changes to the moved functions. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In previous commits we have reduced usage of port_lock to a minimum, and complemented it with usage of bh_lock_sock() at the remaining locations. The purpose has been to remove this lock altogether, since it largely duplicates the role of bh_lock_sock. We are now ready to do this. However, we still need to protect the BH callers from inadvertent release of the socket while they hold a reference to it. We do this by replacing port_lock by a combination of a rw-lock protecting the reference table as such, and updating the socket reference counter while the socket is referenced from BH. This technique is more standard and comprehensible than the previous approach, and turns out to have a positive effect on overall performance. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-