Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-12-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc

Otherwise it is just an useless empty line.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479397449-27085-1-git-send-email-tvrtko.ursulin@linux.intel.com

Similar to existing yesno and onoff and use it throughout the code.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479385814-2358-2-git-send-email-tvrtko.ursulin@linux.intel.com

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Kernel pointer does not sound like an useful thing to log and
pipe name is already contained in the crtc name.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

And also only dump DP config for crtcs with DP encoders.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

It looks to me skl_update_scaler will already log interesting
debug messages when the state transitions or there is an error.

In this case it feels we can remove the two unconditional
debug messages which happen immediately before calling
skl_update_scaler. This way we get rid of the sole debug
message when switching virtual terminals for example.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479376805-5087-1-git-send-email-tvrtko.ursulin@linux.intel.com

v2: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

And as usual a little bit of cascaded function prototype changes.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

And a little bit of function prototype changes.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

And a little bit of cascaded function prototype changes.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb
allocation for each pipe is calculated in crtc_state.

We can rid of the global member by looking at crtc_state.
Do this by saving all active old ddb allocations from the old crtc_state
in an array, and then point them to the new allocation every time we update
a crtc.

This will allow us to keep track of the intermediate ddb allocations,
which is what hw_ddb was previously used for. With hw_ddb gone all
SKL-style watermark values are properly maintained only in crtc_state.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>

This is the last bit required for making nonblocking modesets work
correctly. The state in intel_crtc->hw_ddb is updated in the
nonblocking part of a nonblocking commit.

This means that even attempting a commit before a nonblocking modeset
completes will fail, because intel_crtc->hw_ddb still has stale values.
The stale values are 0 if the crtc is being enabled resulting in a
failure during atomic check, but it may also result in double use of
ddb allocations.

Fix this by explicitly copying the ddb allocation from the old state.
This has to be done explicitly, because a modeset that doesn't change
active pipes, or a modeset converted to a fastset will will clear the
current state.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-4-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>

The watermark updates for SKL style watermarks are no longer done
in the plane callbacks, but are now called in a separate watermark
update function that's called during the same vblank evasion,
before the plane updates.

This also gets rid of the global skl_results, which was required for
keeping track of the current atomic commit.

Changes since v1:
- Move line unwrap to correct patch. (Lyude)
- Make sure we don't regress ILK watermarks. (Matt)
- Rephrase commit message. (Matt)
Changes since v2:
- Fix disable watermark check to use the correct way to determine single
  step watermark support.
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-3-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Small whitespace fix in skl_initial_wm]

Allow the driver to write watermarks during atomic evasion.
This will make it possible to write the watermarks in a cleaner
way on gen9+.

intel_atomic_state is not used here yet, but will be used when
we program all watermarks as a separate step during evasion.

This also writes linetime all the time, while before it was only
done during plane updates. This looks like this could be a bugfix,
but I'm not sure what it affects.

Changes since v1:
- Add comment about atomic evasion to commit message.
- Unwrap I915_WRITE call. (Lyude)
Changes since v2:
- Rename atomic_evade_watermarks to atomic_update_watermarks. (Ville)
- Add line wraps where appropriate, fix grammar in commit message. (Matt)
Changes since v3:
- Actually fix commit message. (Matt)
- Line wrap calls to watermark update functions. (Matt)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-2-git-send-email-maarten.lankhorst@linux.intel.com

Commit 6b5e90f5 ("drm/i915/scheduler: Boost priorities for flips")
added priority boosting for the modern atomic pageflips (and modesets),
but we should do the same for existing users of mmioflips (we don't yet
need to consider csflips as they are not used by execlists and so do not
have any support for a scheduler).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115092249.18356-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Boost the priority of any rendering required to show the next pageflip
as we want to avoid missing the vblank by being delayed by invisible
workload. We prioritise avoiding jank and jitter in the GUI over
starving background tasks.

v2: Descend dma_fence_array when boosting priorities.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-10-chris@chris-wilson.co.uk

On pre-gen4 we connect plane A to pipe B and vice versa to get an FBC
capable plane feeding the LVDS port by default. We have the logic for
the plane swapping duplicated in many places. Let's remove a bit of the
duplication by having the crtc look up the thing from the primary plane.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478616439-10150-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

dp_encoder_is_mst flag in the crtc state can be replaced by
intel_crtc_has_type(..., INTEL_OUTPUT_DP_MST). Let's do that.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479145447-12907-2-git-send-email-ville.syrjala@linux.intel.com

The primary and sprite planes on CHV pipe B support horizontal
mirroring. Expose it to the world.

Sadly the hardware ignores the mirror bit when the rotate bit is
set, so we'll have to reject the 180+X case.

v2: Drop the BIT()
v3: Pass dev_priv instead of dev to IS_CHERRYVIEW()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-4-git-send-email-ville.syrjala@linux.intel.com

Move the plane control register rotation setup away from the
coordinate munging code. This will result in neater looking
code once we add reflection support for CHV.

v2: Drop the BIT(), drop some usless parens,
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-3-git-send-email-ville.syrjala@linux.intel.com

Using == to check for 180 degree rotation only works as long as the
reflection bits aren't set. That will change soon enough for CHV, so
let's stop doing things the wrong way.

v2: Drop the BIT()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-2-git-send-email-ville.syrjala@linux.intel.com

The function's behaviour was changed in 90844f00, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.

Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.

Fixes: 90844f00 ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NEric Engestrom <eric@engestrom.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch

After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.

v2: Tidy vlv_compute_wm. (David Weinehall)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.

v2: Keep original order. (Ville Syrjala)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

This gets rid of a warning that the connectors are used without locking
when doing a nonblocking modeset.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com

All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.

Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: NSean Paul <seanpaul@chromium.org>

The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

intel_cursor_plane_create() and intel_sprite_plane_create() return
an error pointer, so let's not mistakenly look for a NULL pointer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-November/110690.html
Fixes: b079bd17 ("drm/i915: Bail if plane/crtc init fails")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.

v2: Move drm_device to drm_i915_private conversion

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."

Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.

v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
    Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-27-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-24-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-17-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-16-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-15-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>