Fix sh_eth for sh7724 by adding NET_IP_ALIGN support V2.
Without this patch the receive data is misaligned.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the 82598 is fed 802.1q packets, it chokes with
an error of the form:

ixgbe: eth0: ixgbe_tx_csum: partial checksum but proto=81!

As the logic there was not smart enough to look into
the vlan header to pick out the encapsulated protocol.

There are times when we'd like to send these packets
out without having to configure a vlan on the interface.
Here we check for the vlan tag and allow the packet to
go out with the correct hardware checksum.

This patch is a clone of a previously submitted patch by
Arthur Jones <ajones@riverbed.com> for igb (Commit -
fa4a7ef3).
Signed-off-by: NGurucharan Shetty <gshetty@riverbed.com>
Signed-off-by: NArthur Jones <ajones@riverbed.com>
Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modified patch with Dave's comments to replace mdelay with proper msleep.
Fix 82598 copper link issue, where the phy prematurely indicates link
before it is ready to process packets. The new function looks for phy
link and indicates that, when it is available. If phy is not ready
within few seconds of MAC indicating link, the function will return
failure which translates to link down indication.
Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the restart_queue and non_eop_desc counters from being
double-counted.  They are cumulative in each ring, so we don't want to
add them to the cumulative result in the adapter's master counter.
Otherwise, the stats will be inaccurate
Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts bcm63xx_enet to uset get_sset_count
like the other drivers do.
Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since power management is done by PCI subsystem as well as driver,
don't toggle the bit that disables PCI register writes.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Off by one in name lookup makes Optima display as (chip 0xbc)
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from pr_<level>s
Consolidate long format strings
Remove some extra tab indents
Remove some unnecessary ()s from pr_<level>s arguments
Align pr_<level> arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When building for Sun 3:

drivers/net/can/mcp251x.c:1074: undefined reference to `dma_free_coherent'
drivers/net/can/mcp251x.c:976: undefined reference to `dma_alloc_coherent'
drivers/net/can/mcp251x.c:1050: undefined reference to `dma_free_coherent'
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sizeof(dev->dev_addr) is the size of a pointer.  A few lines above, the
size of this field is obtained using netdev->addr_len for a call to memcpy,
so do the same here.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sizeof(dev->dev_addr) is the size of a pointer.  On the other hand,
sizeof(pdata->dev_addr) is the size of an array, so use that instead.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function efx_iterate_state contains the code
memcpy(&payload->msg, payload_msg, sizeof(payload_msg));
This is the only use of payload_msg.  The type of payload_msg is
changed from a pointer to an array, so that the result of sizeof really is
the length of the string.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sizeof(TstSchedTbl) is just the size of the pointer.  Change it to the size
of the referenced data.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

3c574_cs, 3c589_cs:
	disable irq before calling el3_interrupt
	in the media_check function.
Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The return value should be negative.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A valid CAN dataframe can have a data length code (DLC) of 0 .. 8 data bytes.

When reading the CAN controllers register the 4-bit value may contain values
from 0 .. 15 which may exceed the reserved space in the socket buffer!

The ISO 11898-1 Chapter 8.4.2.3 (DLC field) says that register values > 8
should be reduced to 8 without any error reporting or frame drop.

This patch introduces a new helper macro to cast a given 4-bit data length
code (dlc) to __u8 and ensure the DLC value to be max. 8 bytes.

The different handlings in the rx path of the CAN netdevice drivers are fixed.
Signed-off-by: NOliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are certain skews of the NIC which have multiple bits set in
adapter->cap.  Use & instead of == to process rx completions.
Signed-off-by: NAjit Khaparde <ajitk@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it so that reset/interrupt storms can be avoided when
there are mailbox issues.  The new behavior is to only allow the device to
trigger mailbox related resets only once every 10 seconds.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the handling of collisions between the use of the
PF/VF sides of the mailbox.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes a rare use of the USB power management API which
won't be supported after the conversion to the new generic runtime power
management framework. Functionality is not altered.
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The debug batman option needs to depend on the correct
config option.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
[ "No means no!"  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tty count sanity check may need the BKL, that isn't clear. However it
is clear that the count use of the lock is internal and independant of the
bigger use of the lock.

Furthermore the file list locking is also separately locked already
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are two call points, both want to check that tty->signal->leader is
set. Move the test into disassociate_ctty() as that will make locking
changes easier in a bit
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We know that the redirect field is handled via its own locking in all
places
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Start trying to untangle the remaining BKL mess

Updated to fix missing unlock_kernel noted by Dan Carpenter
Signed-off-by: NAlan "I must be out of my tree" Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

moxa_openlock is used for several situations where we want to handle the
case of an ioctl that crosses many ports (not just the open tty), and also
cases where an open races a deinit (eg a pci unplug) and we hangup a port
before we can cope with that.

The non open race cases can use the moxa_lock spinlock. This simplifies sorting
out the remaining mess.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It isn't needed here any more
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is overkill and mostly not needed
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The tty flag can be tested so the shadow flag isn't needed
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- The open lock is needed to fix up the case of a board reset occuring during
  tty open but too early for a sane hangup response.
- The lock can however got for other cases
- Use the port mutex for get/setserial
- Fix up the confused lack of locking on the THROTTLE and other bits in the
  private flags. Just use set/test/clear bit and it covers the cases we need
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Introduce a lock for moxafunc() to protect the cases where were get collisions
between two function requests at the same time.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rework a few bits of this into tty_port format
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Alexander Strakh <strakh@ispras.ru> reported

	KERNEL_VERSION: 2.6.31
	DESCRIBE:
Driver drivers/char/isicom.c might sleep in atomic  context, because it
calls 
tty_port_xmit_buf under spin_lock.

./drivers/char/isicom.c:
1307 static void isicom_hangup(struct tty_struct *tty)
1308 {
...
1315         spin_lock_irqsave(&port->card->card_lock, flags);
1316         isicom_shutdown_port(port);
...

Path to might_sleep macro from isicom_hangup:
1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and
then 
calls isicom_shutdown_port.
2. isiscom_shutdown_port calls tty_port_free_xmit_buf at 
drivers/char/isicom.c:906
3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48

Found by Linux Driver Verification Project.
Reported-by: NAlexander Strakh <strakh@ispras.ru>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Propogate the init/shutdown mutex through the setserial logic. Use the proper
locks for the various bits still using the BKL. Kill the BKL in this driver.

Updated to fix the bug noted by Dan Carpenter
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

At first this looks a fairly trivial conversion but we can't quite push
everything into the right format yet. The open side is easy but care is needed
over the setserial methods. Fix up the locking now that we've adopted the
port->mutex locking rule for the initialization.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Split this into two flags - INIT meaning the board is set up and ACTIVE
meaning the board has ports open. Remove the broken HUPCL casing and push
the counts somewhere sensible.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Trivial conversion in this case so might as well do it while testing the
port_open design is right
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Users of tty port need a way to refcount ports when hotplugging is
involved.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Slice/dice/repeat as with the stallion driver this is just code shuffling
and removal
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>