Replace the apparent typo CONFIG_LOCKDEP_DEBUG with the correct
CONFIG_DEBUG_LOCKDEP.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

the session and pgrp fields in mxser_struct are unused.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Converts 'boolean' to 'bool' and removes the 'boolean' typedef.
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Cc: Jens Axboe <axboe@suse.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix typo when describing RTC_WKALM.  Add some helpful pointers to people
developing their own RTC driver.  Change a bunch of the error messages in the
test program to be a bit more helpful.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The order of locking between lockdep_off/on() and local_irq_save/restore() in
vprintk() should be changed.

* In kernel/printk.c :

vprintk() does :

preempt_disable()
local_irq_save()
lockdep_off()
spin_lock(&logbuf_lock)
spin_unlock(&logbuf_lock)
if(!down_trylock(&console_sem))
   up(&console_sem)
lockdep_on()
local_irq_restore()
preempt_enable()

The goals here is to make sure we do not call printk() recursively from
kernel/lockdep.c:__lock_acquire() (called from spin_* and down/up) nor from
kernel/lockdep.c:trace_hardirqs_on/off() (called from local_irq_restore/save).
It can then potentially call printk() through mark_held_locks/mark_lock.

It correctly protects against the spin_lock call and the up/down call, but it
does not protect against local_irq_restore. It could cause infinite recursive
printk/trace_hardirqs_on() calls when printk() is called from the
mark_lock() error handing path.

We should change the locking so it becomes correct :

preempt_disable()
lockdep_off()
local_irq_save()
spin_lock(&logbuf_lock)
spin_unlock(&logbuf_lock)
if(!down_trylock(&console_sem))
   up(&console_sem)
local_irq_restore()
lockdep_on()
preempt_enable()
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the unused kernel config option PARIDE_PARPORT.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the kernel config option ZISOFS_FS, since it appears that the actual
option is simply ZISOFS.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the few references to the obsolete kernel config option
DEBUG_RWSEMS.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the dead kernel config option AEDSP16_MPU401.

Signed-off-by: Robert P. J. Day <mindspring.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace a small number of expressions with a call to the "container_of()"
macro.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- #ifdef guard this header for multiple inclusion
- adjust the #include's to what is actually required by this header
- remove an unneeded #ifdef
- #endif comments
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- reduce the userspace visible part
- fix the in-kernel compilation
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the last (and commented out) invocation of the obsolete
smp_commence() call.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

unlock_buffer(), like unlock_page(), must not clear the lock without
ensuring that the critical section is closed.

Mingming later sent the same patch, saying:

  We are running SDET benchmark and saw double free issue for ext3 extended
  attributes block, which complains the same xattr block already being freed (in
  ext3_xattr_release_block()).  The problem could also been triggered by
  multiple threads loop untar/rm a kernel tree.

  The race is caused by missing a memory barrier at unlock_buffer() before the
  lock bit being cleared, resulting in possible concurrent h_refcounter update.
  That causes a reference counter leak, then later leads to the double free that
  we have seen.

  Inside unlock_buffer(), there is a memory barrier is placed *after* the lock
  bit is being cleared, however, there is no memory barrier *before* the bit is
  cleared.  On some arch the h_refcount update instruction and the clear bit
  instruction could be reordered, thus leave the critical section re-entered.

  The race is like this: For example, if the h_refcount is initialized as 1,

  cpu 0:                                   cpu1
  --------------------------------------   -----------------------------------
  lock_buffer() /* test_and_set_bit */
  clear_buffer_locked(bh);
                                          lock_buffer() /* test_and_set_bit */
  h_refcount = h_refcount+1; /* = 2*/     h_refcount = h_refcount + 1; /*= 2 */
                                          clear_buffer_locked(bh);
  ....                                    ......

  We lost a h_refcount here. We need a memory barrier before the buffer head lock
  bit being cleared to force the order of the two writes.  Please apply.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation for lib/rbtree.c.
Signed-off-by: NRob Landley <rob@landley.net>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend the set of "__attribute__" shortcut macros, and remove identical
(and now superfluous) definitions from a couple of source files.

based on a page at robert love's blog:

	http://rlove.org/log/2005102601

extend the set of shortcut macros defined in compiler-gcc.h with the
following:

#define __packed                       __attribute__((packed))
#define __weak                         __attribute__((weak))
#define __naked                        __attribute__((naked))
#define __noreturn                     __attribute__((noreturn))
#define __pure                         __attribute__((pure))
#define __aligned(x)                   __attribute__((aligned(x)))
#define __printf(a,b)                  __attribute__((format(printf,a,b)))

Once these are in place, it's up to subsystem maintainers to decide if they
want to take advantage of them.  there is already a strong precedent for
using shortcuts like this in the source tree.

The ones that might give people pause are "__aligned" and "__printf", but
shortcuts for both of those are already in use, and in some ways very
confusingly.  note the two very different definitions for a macro named
"ALIGNED":

  drivers/net/sgiseeq.c:#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf))
  drivers/scsi/ultrastor.c:#define ALIGNED(x) __attribute__((aligned(x)))

also:

  include/acpi/platform/acgcc.h:
    #define ACPI_PRINTF_LIKE(c) __attribute__ ((__format__ (__printf__, c, c+1)))

Given the precedent, then, it seems logical to at least standardize on a
consistent set of these macros.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove hack with printing space to wake up klogd.  Use explicit
wake_up_klogd().

See earlier discussion
http://groups.google.com/group/fa.linux.kernel/browse_frm/thread/75f496668409f58d/1a8f28983a51e1ff?lnk=st&q=wake_up_klogd+group%3Afa.linux.kernel&rnum=2#1a8f28983a51e1ffSigned-off-by: NAlexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Part of long forgotten patch
http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source
Since then, m32r grabbed two copies.

Leave s390 copy because of important absence of CONFIG_VT, but remove
references to non-existent timerlist_lock.  ia64 also loses timerlist_lock.
Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the lone, remaining reference to the long-deceased
rwlock_is_locked() macro.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Naming is confusing, ext3_inc_count manipulates i_nlink not i_count
- handle argument passed in is not used
- ext3 and ext4 already call inc_nlink and dec_nlink directly in other places
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return -ENOENT from ext[34]_link if we've raced with unlink and i_nlink is
0.  Doing otherwise has the potential to corrupt the orphan inode list,
because we'd wind up with an inode with a non-zero link count on the list,
and it will never get properly cleaned up & removed from the orphan list
before it is freed.

[akpm@osdl.org: build fix]
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or
ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a
kernel built without ACL support, then umask was ignored when creating
inodes - though root or user has umask 022, touch creates files as 0666,
and mkdir creates directories as 0777.

This appears to have worked right until 2.6.11, when a fix to the default
mode on symlinks (always 0777) assumed VFS applies umask: which it does,
unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in
s_flags according to s_mount_opt set according to def_mount_opts.

We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test);
but other filesystems only set MS_POSIXACL when ACLs are configured.  We
could fix this at another level; but it seems most robust to avoid setting
the s_mount_opt flag in the first place (at the expense of more ifdefs).

Likewise don't set the XATTR_USER flag when built without XATTR support.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compile-tested.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: <jaharkes@cs.cmu.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix-rmmod-read-write-races-in-proc-entries.patch doesn't want dynamically
allocated ->proc_fops, because it will set it to NULL at module unload time.

Regardless of module status, switch to statically allocated ->proc_fops which
leads to simpler code without wrappers.

AFAICS, also fix the following bug: "sn_force_interrupt" proc entry set
->write for itself, but was created with 0444 permissions. Change to 0644.
Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Minor number 0 (under the raw major) is reserved for the rawctl device
file, which is used to query, set, and unset raw device bindings.  However,
the ioctl interface does not protect the user from specifying a raw device
with minor number 0:

$ sudo ./raw /dev/raw/raw0 /dev/VolGroup00/swap
/dev/raw/raw0:  bound to major 253, minor 2
$ ls -l /dev/rawctl
ls: /dev/rawctl: No such file or directory
$ ls -l /dev/raw/raw0
crw------- 1 root root 162, 0 Jan 12 10:51 /dev/raw/raw0
$ sudo ./raw -qa
Cannot open master raw device '/dev/rawctl' (No such file or directory)

As you can see, this prevents any further raw operations from
succeeding.  The fix (from Steve Fernandez) is quite simple--do not
allow the allocation of minor number 0.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Cc: Steven Fernandez <sfernand@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc emits this warning:

 kernel/auditfilter.c: In function 'audit_filter_user':
 kernel/auditfilter.c:1611: warning: 'state' is used uninitialized in this function

I tend to agree with gcc - there are a couple of plausible exit paths from
audit_filter_user_rules() where it does not set 'state', keeping the
variable uninitialized.  For example if a filter rule has an AUDIT_POSSIBLE
action.  Initialize to 'wont audit'.  Fix whitespace damage too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the rare case where we have skipped orphan inode processing due to a
readonly block device, and the block device subsequently changes back to
read-write, disallow a remount,rw transition of the filesystem when we have an
unprocessed orphan inodes as this would corrupt the list.

Ideally we should process the orphan inode list during the remount, but that's
trickier, and this plugs the hole for now.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the rare case where we have skipped orphan inode processing due to a
readonly block device, and the block device subsequently changes back to
read-write, disallow a remount,rw transition of the filesystem when we have an
unprocessed orphan inodes as this would corrupt the list.

Ideally we should process the orphan inode list during the remount, but that's
trickier, and this plugs the hole for now.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- no longer a userspace header
- add #include <linux/types.h> for in-kernel compilation
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the CPCI-ASIO4 quad port CompactPCI UART board from
electronic system design gmbh.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Get the Perle quad-modem PCI card (PCI-RAS4) detected by serial driver.  It
may also get the PCI-RAS8 running, but can't guarantee as I didn't had one for
testing.
Signed-off-by: NThomas Hoehn <thomas.hoehn@avocent.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- in man and text mode output, if the function return type is empty (like it
  is for macros), don't print the return type and a following space; this
  fixes an output malalignment;

- in the function short description, strip leading, trailing, and multiple
  embedded spaces (to one space); this makes function name/description output
  spacing consistent;

- fix a comment typo;
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup kernel-doc notation in drivers/firmware/edd.c.

Add edd.c to DocBook/kernel-api.tmpl.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is an "RTC framework" driver for the "CMOS" RTCs which are standard on
PCs and some other platforms.  That's MC146818 compatible silicon.
Advantages of this vs.  drivers/char/rtc.c (use one _or_ the other, only
one will be able to claim the RTC irq) include:

 - This leverages both the new RTC framework and the driver model; both
   PNPACPI and platform device modes are supported.  (A separate patch
   creates a platform device on PCs where PNPACPI isn't configured.)

 - It supports common extensions like longer alarms.  (A separate patch
   exports that information from ACPI through platform_data.)

 - Likewise, system wakeup events use "real driver model support", with
   policy control via sysfs "wakeup" attributes and and using normal rtc
   ioctls to manage wakeup.  (Patch in the works.  The ACPI hooks are
   known; /proc/acpi/alarm can vanish.  Making it work with EFI will
   be a minor challenge to someone with e.g. a MiniMac.)

It's not yet been tested on non-x86 systems, without ACPI, or with HPET.
And the RTC framework will surely have teething pains on "mainstream"
PC-based systems (though must embedded Linux systems use it heavily), not
limited to sorting out the "/dev/rtc0" issue (udev easily tweaked).  Also,
the ALSA rtctimer code doesn't use the new RTC API.

Otherwise, this should be a no-known-regressions replacement for the old
drivers/char/rtc.c driver, and should help the non-embedded distros (and
the new timekeeping code) start to switch to the framework.

Note also that any systems using "rtc-m48t86" are candidates to switch over
to this more functional driver; the platform data is different, and the way
bytes are read is different, but otherwise those chips should be compatible.

[akpm@osdl.org: sparc32 fix]
[akpm@osdl.org: sparc64 fix]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Woody Suwalski <woodys@xandros.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I noticed that almost all architectures implemented exactly the same
sys32_sysinfo...  except parisc, where a bug was to be found in handling of
the uptime.  So let's remove a whole whack of code for fun and profit.
Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it
would be the best tested.

This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but
instead extracting out the common code from sys_sysinfo.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:

  * make multi-line initial descriptions single line
  * denote some function names, constants and structs as such
  * change erroneous opening '/*' to '/**' in a few places
  * reword some text for clarity
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Explain a couple of the most common errors in kernel-doc usage.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mostly so people can see the work in progress.  This enhances the encode
function which isn't currently used in the base tree but is when using some of
the testing tty patches.

This resolves a problem with some hardware where applications got confusing
information from the tty ioctls.  Correct but confusing.

In some situations asking for, say, 9600 baud actually gets you 9595 baud or
similar near-miss values.  With the old code this meant that a request for
B9600 got a return of BOTHER, 9595 which programs interpreted as a failure.

The new code now works on the following basis

- If you ask for specific rate via BOTHER, you get a precise return

- If you ask for a standard Bfoo rate and the result is close you get a Bfoo
  return

- If you ask for a standard Bfoo rate and get something way off you get a
  BOTHER/rate return

This seems to fix up the cases I've found where this broke compatibility.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>