- 03 1月, 2006 3 次提交
-
-
由 Takashi Iwai 提交于
Modules: HDA Intel driver Fix PM support on HDA-Intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Intel driver Remove xxx_t typedefs from the HDA-Intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
Modules: HDA Intel driver Rate-limit the azx_get_response timeout message. A continuous 2 per second is too much. Signed-off-by: NRandy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2005 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 11月, 2005 5 次提交
-
-
由 Takashi Iwai 提交于
Fix the type of enable module option to bool. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added dummay obsoleted module options for backward compatibility (to reduce possible bugzilla entries :) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Remove the code for supporting eight cards from the integrated controller drivers because There Can Be Only One controller of each type per mainboard. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Sasha Khapyorsky 提交于
dev_class=SNDRV_PCM_CLASS_MODEM for all supported softmodem PCMs Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod G 提交于
Modules: HDA Intel driver This patch is to make the Intel HDA code work for NVIDIA azalia controller. Modified by Takashi Iwai <tiwai@suse.de> Signed-off-by: NVinod G. <vinodg@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 10月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
HDA Intel driver Disable the auto-correction of DMA position temporarily. It doesn't work as expected yet... Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 5 次提交
-
-
由 Clemens Ladisch 提交于
AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver Trident driver,Digigram VX222 driver,YMFPCI driver Set the module owner field in each driver's struct pci_driver to get the driver symlink in the sysfs device directory. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fix a bug of modem PCM creation (due to a typo). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA Intel driver,HDA generic driver Assign audio PCMs first before modem PCMs. The modem stream is assigned up to device #6, to be consistent over different models. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Check the validity of the current DMA position when position_fix=0 (auto) is set. If the DMA position overcomes the threshold, the driver changes the fix behavior automatically to use POSBUF. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2005 3 次提交
-
-
由 Takashi Iwai 提交于
HDA Intel driver Fix and clean up for the support of ULI M5461 - set CORB/RIRB sizes explicitly - add workarounds for ULI on ia32 - max number of streams depends on the chip type now - increase the size of BDL Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
HDA Intel driver - removed SNDRV_PCM_INFO_RESUME (the driver cannot do PCM resume at the time) - fixed chip->pcm_devs initialization Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
HDA Intel driver Added SiS966 pci id to snd-hda-intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2005 1 次提交
-
-
由 Matt 提交于
HDA Intel driver Patch enables unsolicited responses on the HDA controller. Without the UREN bit set, the controller will not place unsolicited responses in a RIRB. Signed-off-by: NMatt <matt@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2005 3 次提交
-
-
由 Takashi Iwai 提交于
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fixed Oops in the error path from probe function of snd-hda-intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 5月, 2005 5 次提交
-
-
由 Takashi Iwai 提交于
HDA Intel driver Fixed a typo in the type of position_fix module option. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,HDA Intel driver Added the support of VIA VT8251/VT8237A HD-Audio controllers. They are (almost) compatible with Intel ICH6/7. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Frederick Li 提交于
Documentation,HDA Intel driver This patch changes the Intel HD Audio device driver to include the support of HD Audio device embedded in ATI south bridge IXP450. Because the design of ATI chipset follows intel HD Audio specification 1.0, the programming method is the same as that of intel HD Audio device exception one minor change which requires to enable snoop for DMA transport. There are 3 changes that have been made to hda_intel.c file. 1. Added device ID for ATI HD Audio device; 2. Increase maximum CODEC supported to 4; 3. Enable snoop during the driver initialization. Signed-off-by: NFrederick Li <fli@ati.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,HDA Intel driver Added position_fix module option to HDA-intel driver for fixing up the DMA position (possibly hardware-) bugs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver Replace the obsolete pci_module_init() with pci_register_driver(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 5月, 2005 1 次提交
-
-
由 Jason Gaston 提交于
This adds the Intel ESB2 HD Audio DID to the hda_intel.c audio driver. Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-