* convert goto to simpler while loop;
 * use rq_end_sector() instead of computing manually;
 * fix false comments;
 * remove spurious whitespace;
 * convert rq_rb_root macro to an inline function.
Signed-off-by: NAaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Deadline currently only batches sector-contiguous requests, so except
for a few circumstances (e.g. requests in a single direction), it is
essentially first come first served.  This is bad for throughput, so
change it to CSCAN, which means requests in a batch do not need to be
sequential and are issued in increasing sector order.
Signed-off-by: NAaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

elv_register() always returns 0, and there isn't anything it does where
it should return an error (the only error condition is so grave that
it's handled with a BUG_ON).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

After switching data directions, deadline always starts the next batch
from the lowest-sector request.  This gives excessive deadline expiries
and large latency and throughput disparity between high- and low-sector
requests; an order of magnitude in some tests.

This patch changes the batching behaviour so new batches start from the
request whose expiry is earliest.
Signed-off-by: NAaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The deadline I/O scheduler does not reset the batch count when starting
a new batch at a higher-sectored request.  This means the second and
subsequent batch in the same data direction will never exceed a single
request in size whenever higher-sectored requests are pending.

This patch gives new batches in the same data direction as old ones
their full quota of requests by resetting the batch count.
Signed-off-by: NAaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Factor finding the next request in sector-sorted order into
a function deadline_latter_request.
Signed-off-by: NAaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing
variant in the past.  But with __GFP_ZERO it is possible now to do zeroing
while allocating.

Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever
we can.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- ->init_queue() does not need the elevator passed in
- ->put_request() is a hot path and need not have the queue passed in
- cfq_update_io_seektime() does not need cfqd passed in
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

As people often look for the copyright in files to see who to mail,
update the link to a neutral one.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A big win, we now save an allocation/free on each request! With the
previous rb/hash abstractions, we can just reuse queuelist/donelist
for the FIFO data and be done with it.
Signed-off-by: NJens Axboe <axboe@suse.de>

This removes the rbtree handling from deadline.
Signed-off-by: NJens Axboe <axboe@suse.de>

Right now, every IO scheduler implements its own backmerging (except for
noop, which does no merging). That results in duplicated code for
essentially the same operation, which is never a good thing. This patch
moves the backmerging out of the io schedulers and into the elevator
core. We save 1.6kb of text and as a bonus get backmerging for noop as
well. Win-win!
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

They all duplicate macros to check for empty root and/or node, and
clearing a node. So put those in rbtree.h.
Signed-off-by: NJens Axboe <axboe@suse.de>

Use hlist instead of list_head for request hashtable in deadline-iosched
and as-iosched. It also can remove the flag to know hashed or unhashed.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

 block/as-iosched.c       |   45 +++++++++++++++++++--------------------------
 block/deadline-iosched.c |   39 ++++++++++++++++-----------------------
 2 files changed, 35 insertions(+), 49 deletions(-)

There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They were abusing the rb_color field to mark nodes which weren't currently
on the tree. Fix that to use the same method as eventpoll did -- setting
the parent pointer to point back to itself. And use the appropriate
accessor macros for setting and reading the parent.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

the patch below marks various read-only variables in block/* as const,
so that gcc can optimize the use of them; eg gcc will replace the use by
the value directly now and will even remove the memory usage of these.
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NJens Axboe <axboe@suse.de>

Some leftover comments referring to drivers/block that are now block/.
They don't add any information we don't already have, so kill them.
Signed-off-by: NCoywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove last_merge handling from all ioscheds.  This patch
removes merging capability of noop iosched.
Signed-off-by: NTejun Heo <htejun@gmail.com>

This patch updates all four ioscheds to use generic dispatch
queue.  There's one behavior change in as-iosched.

* In as-iosched, when force dispatching
  (ELEVATOR_INSERT_BACK), batch_data_dir is reset to REQ_SYNC
  and changed_batch and new_batch are cleared to zero.  This
  prevernts AS from doing incorrect update_write_batch after
  the forced dispatched requests are finished.

* In cfq-iosched, cfqd->rq_in_driver currently counts the
  number of activated (removed) requests to determine
  whether queue-kicking is needed and cfq_max_depth has been
  reached.  With generic dispatch queue, I think counting
  the number of dispatched requests would be more appropriate.

* cfq_max_depth can be lowered to 1 again.

Original from Tejun Heo, modified version applied.
Signed-off-by: NJens Axboe <axboe@suse.de>

That ?: trick gives us the creeps.

Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cleanup of deadline_dispatch_requests():

- replace drq selection with hopefully clearer while semantically the
  same construct: take write request, if there is any, otherwise take read
  one, or NULL if none exist.

- kill unused other_dir.
Signed-off-by: NNikita Danilov <nikita@clusterfs.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch to allocate the control structures for for ide devices on the node of
the device itself (for NUMA systems).  The patch depends on the Slab API
change patch by Manfred and me (in mm) and the pcidev_to_node patch that I
posted today.

Does some realignment too.
Signed-off-by: NJustin M. Forbes <jmforbes@linuxtx.org>
Signed-off-by: NChristoph Lameter <christoph@lameter.com>
Signed-off-by: NPravin Shelar <pravin@calsoftinc.com>
Signed-off-by: NShobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sysfs: fix drivers/block so if an attribute doesn't implement
       show or store method read/write will return -EIO
       instead of 0 or -EINVAL.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!