Commit f41caddb ("omap2+: Use Kconfig
symbol in Makefile instead of obj-y") reorganized this Makefile. But,
for some reason, it also added references to CONFIG_MACH_ENCORE and
board-omap3encore.o. But there's no Kconfig symbol MACH_ENCORE and
there's no file board-omap3encore.c. This line can safely be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable the AESS auto-gating control bit during AESS hwmod setup.  This
fixes the following boot warning on OMAP4:

omap_hwmod: aess: _wait_target_disable failed

Without this patch, the AESS IP block does not indicate to the PRCM
that it is idle after it is reset.  This prevents some types of SoC
power management until something sets the auto-gating control bit.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NSebastien Guiriec <s-guiriec@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Péter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>

Add restart hook so that DTS based AM33xx builds can restart
the platform.
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NJean-Sebastien A. Beaudry <jsabeaudry@handyem.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

As apollon board doesn't used anymore, remove it.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
[tony@atomide.com: dropped uncompress.h changes, it's gone]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Flip on multiplatform support for omap2+.

No changes to omap2plus_defconfig needed, but please note
that you may need to update your custom config files to
make sure you have:

CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_OMAP2PLUS=y

And may need CONFIG_ARCH_MULTI_V6=y if booting omap2 boards.

Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Looks like we missed plat-omap/fb.c for cpu_is_omap usage
mach-omap2. This is the last user of cpu_is_omap, so let's
quickly fix it up so we can finally remove plat/cpu.h for
omap2lus.

We want to limit cpu_is_omap macro usage to mach-omap2 only so
we can make plat/cpu.h private. After this we can finally drop
plat/cpu.h for omap2+.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This file should not be in arch/arm. Move it to drivers/iommu
to allow making most of the header local to drivers/iommu.

This is needed as we are removing plat and mach includes
from drivers for ARM common zImage support.

Cc: Ido Yariv <ido@wizery.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: linux-media@vger.kernel.org
Acked-by: NOhad Ben-Cohen <ohad@wizery.com>
Acked-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 6e740f9a (ARM: OMAP: Move omap-pm-noop.c local to mach-omap2)
moved omap-pm-noop to be local to mach-omap2. However, the makefile
entry got placed within ifeq ($(CONFIG_PM),y) which was not the
case earlier.

Fix the issue by moving it out of the ifeq ($(CONFIG_PM),y) in
the makefile as these stubs are needed also when PM is not set.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Select COMMON_CLK for all OMAP2+ SoCs and switch over to using new
data files for OMAP2/3/4.

The older data files will get removed in subsequent patches.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: move 'select COMMON_CLK' from ARCH_OMAP2PLUS_TYPICAL to
 the per-SoC and per-"arch" Kconfig sections]
[mturquette@ti.com: fixed up #ifdef mismatch in clock.h in previous
  patch which drops that change from this patch]
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/prcm.c and arch/arm/plat-omap/include/plat/prcm.h
are now completely unused and can be removed.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>

Split omap_prcm_restart() from mach-omap2/prcm.c into SoC-specific
variants.  These functions need to be able to save the reboot reason
into the scratchpad RAM.  This implies a dependency on both the PRM
and SCM IP blocks, so they've been moved into their own file.  This
will eventually call functions in the PRM and SCM drivers, once those
are created.

Vaibhav Hiremath <hvaibhav@ti.com> identified an unused prototype in
the first version of this patch - now removed.  Tony Lindgren
<tony@atomide.com> noted a compile problem with some RMK Kconfigs;
resolved in this patch.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>

Device tree support for omapdss is still some way in the future.  In an
effort to get a minimal DSS support for DT enabled kernel on selected
OMAP4 boards, we'll go for a temporary solution: We will call the same
non-DT omapdss setup code for OMAP4 SDP and Pandaboards from
board-generic.c, thus enabling DSS for those boards.

This patch moves the display setup code from board-omap4panda.c to
dss-common.c. dss-common.c will be called by the board-omap4panda.c when
running on non-DT kernel, and by board-generic.c when running on DT
enabled kernel.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This code should be private to mach-omap2.

The only use for it in for omap1 has been in dmtimer.c
to check for context loss. However, omap1 does not
lose context during idle, so the code is not needed.
Further, omap1 timer has OMAP_TIMER_ALWON set, so omap1
was not hitting omap_pm_get_dev_context_loss_count()
test.

Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Let's make the omap2+ specific parts private to mach-omap2.

This leaves just a minimal shared code into plat-omap like
it should be.
Signed-off-by: NTony Lindgren <tony@atomide.com>

There are several CM operations which behave similarly across OMAP2+
SoCs, but which have slight differences in their underlying
implementations.

This patch creates the support code for this function pointer
registration process.  No function pointers are included yet, but a
subsequent patch will create these for the module IDLEST registers.

This patch allows other code to use CM-provided data and operations
without needing to know which SoC is currently in use.  A further
description of the concept is provided in the patch entitled
"ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers".
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and
OMAP2xxx-specific macros into cm2xxx.[ch].  Move basic CM register
access functions into static inline functions in cm2xxx_3xxx.h,
leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c.

As part of this, split the CM and hwmod code that waits for devices to
become ready into SoC-specific functions.

This is in preparation for the upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Move the low-level SoC-specific powerdomain control functions into
prm*.c.  For example, OMAP2xxx low-level powerdomain functions go into
prm2xxx.c.  Then remove the unnecessary powerdomain*xxx*.c files.

The objective is to centralize low-level PRM register accesses into
the prm*.[ch] files, and then to export an OMAP SoC-independent API to
higher-level OMAP power management code.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and
OMAP2xxx-specific macros into prm2xxx.h.  (prm2xxx.c will be created
by a subsequent patch when it's needed.)  Move basic PRM register
access functions into static inline functions in prm2xxx_3xxx.h, leaving
only OMAP2/3 hardreset functions in prm2xxx_3xxx.c.

Also clarify the initcall function naming to reinforce that this code
is specifically for the PRM IP block.

This is in preparation for the upcoming powerdomain series and the
upcoming move of this code to drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Reviewed-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Let's make omap_device local to mach-omap2 for
ARM common zImage support.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Convert OMAP2/3 devices to use HWMOD for creating a PMU device. To support PMU
on OMAP2 devices we only need to use MPU sub-system and so we can simply use
the MPU HWMOD to create the PMU device. To support PMU on OMAP3 devices, we need
to use the MPU and DEBUG sub-systems and so use these HWMODs to create the PMU
device for OMAP3.

The MPU HWMOD for OMAP2/3 devices is currently missing the PMU interrupt and so
add the PMU interrupt to the MPU HWMOD for these devices.

This change also moves the PMU code out of the mach-omap2/devices.c files into
its own pmu.c file as suggested by Kevin Hilman to de-clutter devices.c.

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: fixed checkpatch messages; updated to apply; dropped old-style
 initial filename line in header comments]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

OMAP interconnect drivers are used for the interconnect error handling.
Since they are bus driver, lets move it to newly created drivers/bus.
Tested-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Clean up the PRCM sections of the Makefile; this saves a few lines.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Clean up the OMAP clock code sections of the Makefile to save
some lines of diff.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The prm44xx.o and sleep44xx.o build directives belong with the other
PRCM- and PM-related build sections in the Makefile; move them there.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Move MPU INTCPS (interrupt controller) and secure monitor code build
directives to their own Makefile sections, for clarity.  Coalesce
SDRC-related Makefile directives into the SDRC Makefile section.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Move the omap_hwmod_common_data.o build directive down to the hwmod
data Makefile section where it belongs.  Move the omap_hwmod.o build
directive to the top 'Common support' line, since we have no separate
hwmod code Makefile section, and it's currently needed for all OMAP2+.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Convert spaces that should be tabs into tabs.  Fix another minor
formatting issue.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

This patch adds HWMOD data for all the peripherals of
AM335X device and also hooks up to the existing OMAP framework.

hwmod data has been already been cleaned up for the recent
changes in clocktree, where all leaf nodes have been removed,
since with modulemode based control, both clock and hwmod
interface does same thing. This reduces the code size to large
extent and also avoids duplication of same control.
So instead of specifying module's leaf node as a main_clk,
now we are relying on parent clock of module's functional clock.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: removed period in hwmod device names; changed mmc2 main_clk
 to mmc_clk at Vaibhav's request; added trailing commas to structure
 records at Tony's request to deal with some rmk parsing issues; added
 OMAP_INTC_START to facilitate sparse-IRQ conversion]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Fix inconsistency between mach-types and CONFIG_ name that prevents
touchbook board from booting.
Signed-off-by: NRadek Pilar <mrkva@mrkva.eu>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The l3 interconnect ip is same for OMAP4 and OMAP5.
So reuse the l3 error handler error code for OMAP5
as well. Also a few targets has been newly added for
OMAP5. So updating the driver for that here.
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP
architecture. It's a dual core SOC with GIC used for interrupt
handling and with an integrated L2 cache controller.

OMAP5432 is another variant of OMAP5430, with a
memory controller supporting DDR3 and SATA.

Patch includes:
 - The machine specific headers and sources updates.
 - Platform header updates.
 - Minimum initialisation support for serial.
 - IO table init
Signed-off-by: NR Sricharan <r.sricharan@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

The function __omap2_set_globals() can be common across all
platforms/architectures, even in case of omap4, internally it
calls same set of functions as in __omap2_set_globals() function
(except for sdrc).
This patch adds new config flag SOC_HAS_OMAP2_SDRC to handle sdrc,
so that we can reuse same function across omap2/3/4...
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Initially, we decided to make am33xx family of device to fall
under omap3 class (cpu_is_omap34xx() = true), since it carries
Cortex-A8 core. But while adding complete baseport support
(like, clock, power and hwmod) support, it is observed that,
we are creating more and more problems by treating am33xx device
as omap3 family, as nothing matches between them
(except cortex-A8 mpu).

So,  after long discussion we have came to the conclusion that,
we should not consider am33xx device as omap3 family, instead
create separate class (SOC_AM33XX) under OMAP2PLUS.
This means, for am33xx device, cpu_is_omap34xx() will return false,
and only cpu_is_am33xx() will be true.

Please refer to the link below, for mailing-list discussion on this -

http://www.spinics.net/lists/linux-omap/msg69439.htmlSigned-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[tony@atomide.com: fixed typo, updated for soc_is changes]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Register OMAP DRM/KMS platform device.  DMM is split into a
separate device using hwmod.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob.clark@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

AM33XX clock implementation is different than any existing OMAP
family of devices. Although DPLL module is similar to OMAP4
device, but the usage is very much different than OMAP4.
AM33XX has different peripheral set and each module gets
integrated to the clock framework differently than OMAP
family of devices.

This patch adds full Clock tree data for AM33XX family
of devices and also integrates it into existing OMAP framework.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: updated to apply; changed 'soc_is_am33xx' to
 'cpu_is_am33xx' to match usage in Tony's current am33xx branch]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

The current Makefile compiles the cpuidle34xx.c and cpuidle44xx.c files
even if the cpuidle option is not set in the kernel.

This patch fixes this by creating a section in the Makefile where these
files are compiled only if the CONFIG_CPU_IDLE option is set.

This modification breaks an implicit dependency between CPU_IDLE and PM as
they belong to the same block in the Makefile. This is fixed in the Kconfig
by selecting explicitely PM is CPU_IDLE is set.

The linux coding style recommend to use no-op functions in the headers
when the subsystem is disabled instead of adding big section in C files.

This patch fix this also.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Reviewed-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

Remove prm_clkdm and cm_clkdm and allow hwmods to have no clockdomain.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>

AM33XX PRCM module consists of various clockdomains, in all
total we have 18 clockdomains available, with following
controlling options,
   - SW Sleep: sw forced sleep transition
   - SW Wakeup: sw forced wakeup transition

This patch adds all available clockdomain data, respective
clockdomain operations for AM33XX family of device, and also
integrates it into existing OMAP framework.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NVaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
CC: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: removed CLKDM_NO_AUTODEPS from clockdomain flags, removed
 unnecessary .clktrctrl_offs field; updated for 3.5]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Add offset & mask fields to struct powerdomain

In case of AM33xx family of devices, there is no consistency between
PWRSTCTRL & PWRSTST register offsers in PRM space, for example -

PRM_XXX           PWRSTCTRL     PWRSTST
=======================================
PRM_PER_MOD:      0x0C,         0x08
PRM_WKUP_MOD:     0x04,         0x08
PRM_MPU_MOD:      0x00,         0x04
PRM_DEVICE_MOD:   NA,           NA

And also, there is no consistency between bit-offsets inside
PWRSTCTRL & PWRSTST register, for example -

PRM_XXX           LOGICRET  MEMON  MEMRET
=======================================
GFX_PWRCTRL:      2,        17,    6
PER_PWRCTRL:      3,        25,    29
MPU_PWRCTRL:      2,        18,    22
WKUP_PWRCTRL:     3,        NA,    NA

This means, we need to maintain and pass on all this information
in powerdomain handle; so adding fields for,
   - PWRSTCTRL/ST register offset
   - Logic retention state mask
   - mem_on/ret/pwrst/retst mask

Currently, this fields is only applicable and used for AM33XX devices.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: this patch is a combination of "Add offset & mask fields to
 struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx:
 Add powerdomain & PRM support"; updated for 3.5]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>