- 01 5月, 2012 8 次提交
-
-
由 Henrik Rydberg 提交于
Switch the driver over to device group handling. By adding the HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer match multitouch devices. By adding the HID_GROUP_MULTITOUCH entry to the device list, hid-multitouch will match all unknown multitouch devices, and udev will automatically load the module. Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling can be removed. Since all HID MT devices have HID_DG_CONTACTID, they can be removed from the hid_have_special_driver list. With this patch, the unknown device ids are no longer NULL, so the code is modified to check for the generic entry instead. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Most HID drivers do not need to know what bus driver is in use. A generic group driver can drive any hid device, and the device list should not need to be duplicated for each new bus. This patch adds wildcard matching to the HID bus, simplifying device list handling for group drivers. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
In order to allow the report descriptor to influence the hid device properties, one needs to parse the descriptor early, without reference to any driver. Scan the descriptor for group information during device add, before the device has been broadcast to userland. The device modalias will contain group information which can be used to differentiate between modules. For starters, just handle the generic group. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
HID devices are only partially presented to userland. Hotplugged devices emit events containing a modalias based on the basic bus, vendor and product entities. However, in practise a hid device can depend on details such as a single usb interface or a particular item in a report descriptor. This patch adds a device group to the hid device id, and broadcasts it using uevent and the device modalias. The module alias generation is modified to match. As a consequence, a device with a non-zero group will be processed by the corresponding group driver instead of by the generic hid driver. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
The low-level driver can read the report descriptor, but it cannot determine driver-specific changes to it. The hid core can fixup and parse the report descriptor during driver attach, but does not have direct access to the descriptor when doing so. To be able to handle attach/detach of hid drivers properly, a semantic change to hid_parse_report() is needed. This function has been used in two ways, both as descriptor reader in the ll drivers and as a parsor in the probe of the drivers. This patch splits the usage by introducing hid_open_report(), and modifies the hid_parse() macro to call hid_open_report() instead. The only usage of hid_parse_report() is then to read and store the device descriptor. As a consequence, we can handle the report fixups automatically inside the hid core. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Tested-by: NNikolai Kondrashov <spbnick@gmail.com> Tested-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
The current code allows several consecutive calls to hid_parse_report(), which may have happened to work before, but would cause a memory leak and generally be incorrect. This patch collects all the reports before sending them once. Cc: Nestor Lopez Casado <nlopezcasad@logitech.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Upcoming changes will split the semantics of hid_parse_report() and hid_parse(), so make sure drivers use hid_parse() in probe(). Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2012 1 次提交
-
-
由 Josh Boyer 提交于
Commit 4f5ca836 "HID: hid-input: add support for HID devices reporting Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report the battery strength of HID devices. The commit log explicitly mentions it not working properly with recent userspace, but it is default y anyway. This is rather odd, and actually causes problems on real systems. This works around Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=806295Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 4月, 2012 1 次提交
-
-
由 Stephen Boyd 提交于
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2012 1 次提交
-
-
由 Jiri Kosina 提交于
The device is a bluetooth device, but one occurence by mistake had marked it as USB. Reported-by: NJoshua Dillon <jvdillon@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 3月, 2012 1 次提交
-
-
由 Andreas Nielsen 提交于
Adds multitouch support for the Gametel Android game controller. The multitouch events are emulated by the Gametel device. Each physical button is configured to generate a MT event on a specific coordinate. This seems to be the only way for us to support Android games that doesn't support HID gamepads. It is possible to inject MT events at Android level, but this requires root on the phone. Signed-off-by: NAndreas Nielsen <eas@svep.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 3月, 2012 2 次提交
-
-
由 Przemo Firszt 提交于
This patch adds reporting of ABS_WHEEL event. Raported walues are 0..71 and are related to absolute location of the finger on the wheel. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Reviewed-by: NJason Gerecke <killertofu@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Przemo Firszt 提交于
It's a trivial patch. It's doesn't change the functionality as the helper input_set_capability does the same thing. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 3月, 2012 1 次提交
-
-
由 Jiri Kosina 提交于
Add support for BT-driven configuration of the TiVo remote. Reported-by: NJoshua Dillon <jvdillon@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 3月, 2012 4 次提交
-
-
由 Przemo Firszt 提交于
Stylus buttons have to be resetted when going out-of-prox. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Reviewed-by: NJason Gerecke <killertofu@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Microsoft's documentation about multitouch protocols tells that if a device presents one touch per report, then it should be treated as a serial protocol. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
When the quirk HID_QUIRK_MULTITOUCH is present and when hid-multitouch is loaded, let's pass the device to hid-multitouch even if it has not been registered in hid-multitouch. If any other driver wants to take precedence over hid-multitouch, the usual way of adding it to hid_have_special_driver will work as the quirk HID_QUIRK_MULTITOUCH won't be set by the generic hid layer. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
LG multitouch panels, such as the one found in Dell ST2220T, has buggy reports descriptors. With the previous implementation, it was impossible to rely on the reports descriptors to determine how the different touches are emitted from the device. This patch changes the splitting of the different touches in the report in a more robust way. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 3月, 2012 2 次提交
-
-
由 Jiri Kosina 提交于
Introduce 'hid_ignore_special_drivers' module parameter that makes hid-core claim the device even if it's listed in hid_have_special_driver[]. This is useful mostly for debugging purposes and specialized initrds, where all the hid drivers are not avaiable. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 3月, 2012 7 次提交
-
-
由 Benjamin Tissoires 提交于
Some quanta devices do not like to be polled for reports descriptors, thus this quirk. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
This is a list of devices that should be handled by hid-multitouch. They all present the HID usage "Contact ID" and won't be handled by hid-input. Some of them have _not_ been tested (though I have their report descriptors), but I've been guaranted by eeti that they follow the same protocol. The tested ones are also blacklisted in hid-core.c. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Nikolai Kondrashov 提交于
Add support for unknown Waltop tablet with product ID 0x0038. This tablet is sold as Genius G-Pen F509. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Nikolai Kondrashov 提交于
Replace original report descriptor dumps in the comments with links to tablet descriptions in a wiki, to make code clearer. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Nikolai Kondrashov 提交于
Replace original report descriptor dumps in the comments with links to tablet descriptions in a wiki, to make code clearer. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 3月, 2012 1 次提交
-
-
由 Nikolai Kondrashov 提交于
Allow array field values out of range as per HID 1.11 specification, section 6.2.25: Rather than returning a single bit for each button in the group, an array returns an index in each field that corresponds to the pressed button (like keyboard scan codes). An out-of range value in and array field is considered no controls asserted. Apparently, "and" above is a typo and should be "an". This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never released. The relevant part of Waltop tablet report descriptors is this: 0x09, 0x42, /* Usage (Tip Switch), */ 0x09, 0x44, /* Usage (Barrel Switch), */ 0x09, 0x46, /* Usage (Tablet Pick), */ 0x15, 0x01, /* Logical Minimum (1), */ 0x25, 0x03, /* Logical Maximum (3), */ 0x75, 0x04, /* Report Size (4), */ 0x95, 0x01, /* Report Count (1), */ 0x80, /* Input, */ This is a regression fix for commit b4b583d4 ("HID: be more strict when ignoring out-of-range fields"). Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 3月, 2012 2 次提交
-
-
由 Przemo Firszt 提交于
This patch adds reporting of 1 wheel button and 8 strip buttons for Intuos4 WL. The buttons are reported as BTN_0 to BTN_9. The change of type butstate variable is required as the old type 'char' couldn't store state of 9 buttons. The change is not affecting Graphire tablet as it only uses first 2 bits of 'butstate'. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Acked-by:Ping Cheng <pinglinux@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Przemo Firszt 提交于
This patch adds reporting of distance of tool to the tablet surface. Maximum reported value is 63 (0x3F). Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Acked-by: NPeter Hutterer <peter.hutterer@who-t.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 2月, 2012 2 次提交
-
-
由 Nikolai Kondrashov 提交于
Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X. Update Kconfig entry accordingly, remove EXPERT dependency. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alan Stern 提交于
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed by AIREN. This keyboard seems to have a lot of bugs; NOGET works around only one of them. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: Nokias <d.okias@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 2月, 2012 2 次提交
-
-
由 Przemo Firszt 提交于
This patch implements reporting id and serial number of used tool. Reported values are the same as for USB on of the driver for wacom Intuos4 WL Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Przemo Firszt 提交于
ABS_MISC has to be set for Intuos4 WL otherwise xorg driver won't use proper protocol and the information about tool id and serial is lost. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Reviewed-by: NChris Bagwell <chris@cnpbagwell.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 2月, 2012 1 次提交
-
-
由 Jiri Kosina 提交于
Reported-by: NAndreas Hübner <andreas@k4n.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 2月, 2012 1 次提交
-
-
由 Andreas Hübner 提交于
The driver currently only supports the PS1000 controller. It fixes the report descriptor by removing a non-existing axis and clearing the constant bit on the d-pad and button input reports. Signed-off-by: NAndreas Hübner <andreas@k4n.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 21 2月, 2012 3 次提交
-
-
由 Konstantin Khlebnikov 提交于
Before commit 534a7b8e ("HID: Add full support for Logitech Unifying receivers") Logitech Unifying receiver can work as generic device without special driver, after that commit these devices does not works without special driver. After this patch they will use generic driver if special driver is disabled. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Przemo Firszt 提交于
Don't zero the current tool before reporting its release to the input subsystem. Signed-off-by: NAristeu Rozanski <aris@redhat.com> Tested-by: NPrzemo Firszt <przemo@firszt.eu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Sean Young 提交于
Also correct the quirks for the Super Joy Box 3 Pro and Super Dual Box. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-