- 18 7月, 2015 1 次提交
-
-
由 Paul E. McKenney 提交于
The rcu_seq operations were open-coded in _rcu_barrier(), so this commit replaces the open-coding with the shiny new rcu_seq operations. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
- 05 7月, 2015 2 次提交
-
-
由 Allen Hubbe 提交于
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Allen Hubbe 提交于
Abstract the NTB device behind a programming interface, so that it can support different hardware and client drivers. Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
- 04 7月, 2015 3 次提交
-
-
由 Srikar Dronamraju 提交于
Currently print_cfs_rq() is declared in include/linux/sched.h. However it's not used outside kernel/sched. Hence move the declaration to kernel/sched/sched.h Also some functions are only available for CONFIG_SCHED_DEBUG=y. Hence move the declarations to within the #ifdef. Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435252903-1081-2-git-send-email-srikar@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Naveen N. Rao 提交于
Both CONFIG_SCHEDSTATS=y and CONFIG_TASK_DELAY_ACCT=y track task sched_info, which results in ugly #if clauses. Simplify the code by introducing a synthethic CONFIG_SCHED_INFO switch, selected by both. Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Cc: ricklind@us.ibm.com Link: http://lkml.kernel.org/r/8d19eef800811a94b0f91bcbeb27430a884d7433.1435255405.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Commit 1cde2930 ("sched/preempt: Add static_key() to preempt_notifiers") had two problems. First, the preempt-notifier API needs to sleep with the addition of the static_key, we do however need to hold off preemption while modifying the preempt notifier list, otherwise a preemption could observe an inconsistent list state. KVM correctly registers and unregisters preempt notifiers with preemption disabled, so the sleep caused dmesg splats. Second, KVM registers and unregisters preemption notifiers very often (in vcpu_load/vcpu_put). With a single uniprocessor guest the static key would move between 0 and 1 continuously, hitting the slow path on every userspace exit. To fix this, wrap the static_key inc/dec in a new API, and call it from KVM. Fixes: 1cde2930 ("sched/preempt: Add static_key() to preempt_notifiers") Reported-by: NPontus Fuchs <pontus.fuchs@gmail.com> Reported-by: NTakashi Iwai <tiwai@suse.de> Tested-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 03 7月, 2015 1 次提交
-
-
由 Joel Porquet 提交于
At the moment the IRQCHIP_DECLARE macro is only declared locally in drivers/irqchip/irqchip.h. It prevents from using it directly in arch/* directories whenever irqchip drivers only exist there, which happens in a few cases (e.g. arc, arm, microblaze and mips). This patch makes the macro to be globally defined, i.e. in include/linux/irqchip.h, and thus usable for arch-specific declarations of irqchip drivers. In this way, it is very similar to what clocksource does (ie CLOCKSOURCE_OF_DECLARE is defined in include/linux/clocksource.h). For now, this patch only moves the declaration of the macro IRQCHIP_DECLARE to the global header 'include/linux/irqchip.h' and make 'drivers/irqchip/irqchip.h' include 'include/linux/irqchip.h'. Later, other patches will get rid of 'drivers/irqchip/irqchip.h' and modify all the impacted irqchip drivers. Signed-off-by: NJoel Porquet <joel@porquet.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1435865565-14114-1-git-send-email-joel@porquet.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 02 7月, 2015 16 次提交
-
-
由 Tejun Heo 提交于
52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") made bdi (backing_dev_info) host per-cgroup wb's (bdi_writeback's). As the congested state needs to be per-wb and referenced from blkcg side and multiple wbs, the patch made all non-root cong's (bdi_writeback_congested's) reference counted and indexed on bdi. When a bdi is destroyed, cgwb_bdi_destroy() tries to drain all non-root cong's; however, this can hang indefinitely because wb's can also be referenced from blkcg_gq's which are destroyed after bdi destruction is complete. To fix the bug, bdi destruction will be updated to not wait for cong's to drain, which naturally means that cong's may outlive the associated bdi. This is fine for non-root cong's but is problematic for the root cong's which are embedded in their bdi's as they may end up getting dereferenced after the containing bdi's are freed. This patch makes root cong's behave the same as non-root cong's. They are no longer embedded in their bdi's but allocated separately during bdi initialization, indexed and reference counted the same way. * As cong handling is the same for all wb's, wb->congested initialization is moved into wb_init(). * When !CONFIG_CGROUP_WRITEBACK, there was no indexing or refcnting. bdi->wb_congested is now a pointer pointing to the root cong allocated during bdi init and minimal refcnting operations are implemented. * The above makes root wb init paths diverge depending on CONFIG_CGROUP_WRITEBACK. root wb init is moved to cgwb_bdi_init(). This patch in itself shouldn't cause any consequential behavior differences but prepares for the actual fix. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NJon Christopherson <jon@jons.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=100681Tested-by: NJon Christopherson <jon@jons.org> Added <linux/slab.h> include to backing-dev.h for kfree() definition. Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Allen Hubbe 提交于
This patch only moves files to their new locations, before applying the next two patches adding the NTB Abstraction layer. Splitting this patch from the next is intended make distinct which code is changed only due to moving the files, versus which are substantial code changes in adding the NTB Abstraction layer. Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: NJon Mason <jdmason@kudzu.us>
-
由 Bob Moore 提交于
ACPICA commit 2fcf4f4c95e6a4875f39a929f8f92ef50cc53bb5 ACPICA commit d7a940bb308d001b5d2b196174fee36c7daa61d6 Version 20150619. Link: https://github.com/acpica/acpica/commit/2fcf4f4c Link: https://github.com/acpica/acpica/commit/d7a940bbSigned-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 254bf77e7ca01cb27e026fa5737f7df8dae03f2c - Add constans for the start_method. - Remove the control structure, not part of ACPI, not defined in the current TCG spec. Link: https://github.com/acpica/acpica/commit/254bf77eReported-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 33140b4498666337dd33a00cf3c4797a53981a7b Changes for a new version of the 3rd party spec for these tables, the "TCG ACPI Specification", December 14, 2014. Also, moved the definition of TPM2 to actbl2.h, next to TCPA, since both should be together. Update the table compiler/disassembler code for the tables. However, the "Server" TCPA table is not supported at this time. Link: https://github.com/acpica/acpica/commit/33140b44Reported-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 3b1026e0bdd3c32eb6d5d313f3ba0b1fee7597b4 ACPICA commit 00f0dc83f5cfca53b27a3213ae0d7719b88c2d6b ACPICA commit 47d22a738d0e19fd241ffe4e3e9d4e198e4afc69 Across all of ACPICA. Replace C library macros such as ACPI_STRLEN with the standard names such as strlen. The original purpose for these macros is long since obsolete. Also cast various invocations as necessary. Bob Moore, Jung-uk Kim, Lv Zheng. Link: https://github.com/acpica/acpica/commit/3b1026e0 Link: https://github.com/acpica/acpica/commit/00f0dc83 Link: https://github.com/acpica/acpica/commit/47d22a73Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NJung-uk Kim <jkim@FreeBSD.org> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit c0ce529e1fbb8ec47d2522a3aa10f3ab77e16e41 There is no reference counting implemented for struct acpi_namespace_node, so it is currently not removable during runtime. This patch changes the namespace override code to keep the old struct acpi_namespace_node undeleted so that the override mechanism can happen during runtime. Bob Moore. Link: https://github.com/acpica/acpica/commit/c0ce529eSigned-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
ACPICA commit 27415c82fcecf467446f66d1007a0691cc5f3709 This patch adds OSDT (Override System Definition Table) support. When OSDT is loaded, conflict namespace objects will be overridden by the AML interpreter. Bob Moore, Lv Zheng. Link: https://github.com/acpica/acpica/commit/27415c82Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Hanjun Guo 提交于
ACPICA commit 4b100dc43e8baee8c8b4891b23bc7ad03eba6a28 Support for the new version field in the generic distributor subtable. Hanjun Guo <hanjun.guo@linaro.org> Link: https://github.com/acpica/acpica/commit/4b100dc4Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Suravee Suthikulpanit 提交于
ACPICA commit 9a2b638acb3a7215209432e070c6bd0312374229 ACPI Device object often contains a _CLS object to supply PCI-defined class code for the device. This patch introduces logic to process the _CLS object. Suravee Suthikulpanit, Lv Zheng. Link: https://github.com/acpica/acpica/commit/9a2b638aAcked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org> Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 5d00e67a74542d030f0a55e7a947a020ef0d9693 This patch copies EFI interface definitions to the ACPICA code base so that the EFI utility support can be ported to other EFI implementation. Known issues: 1. MS Builds of uefi_call_wrapper() The uefi_call_wrapper() in GNU EFI is implemented in a the way to work around the ABI difference between Unix and MS. While I don't have environment to test the MS builds. In order to port the ACPICA utilities to other EFI implementation, all that need to be done is to impelement the 64-bit division support and the program entry point where the efi_main() is invoked. Code to impelement these is platform specific, and ACPICA currently choose to hide such platform specific code within the specific EFI impelementation. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/5d00e67aSigned-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 72f5a358f28c5d154ed613c142c7dca03192c5ee This patch intoduces generic variable macro detection support and fixes build breakage issue with macros using __VA_ARGS__ feature defined in C99. This patch fixes this build issue. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/72f5a358Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 4da56eeae0749dfe8491285c1e1fad48f6efafd8 The following commit temporarily disables correct 64-bit FADT addresses favor during the period the root cause of the bug is not fixed: Commit: 85dbd580 ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses. With enough protections, this patch re-enables 64-bit FADT addresses by default. If regressions are reported against such change, this patch should be bisected and reverted. Note that 64-bit FACS favor and 64-bit firmware waking vector favor are excluded by this commit in order not to break OSPMs. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Link: https://github.com/acpica/acpica/commit/4da56eea Cc: 3.15.1+ <stable@vger.kernel.org> # 3.15.1+ Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658 This patch adds a new FACS initialization flag for acpi_tb_initialize(). acpi_enable_subsystem() might be invoked several times in OS bootup process, and we don't want FACS initialization to be invoked twice. Lv Zheng. Link: https://github.com/acpica/acpica/commit/90f5332a Cc: All applicable <stable@vger.kernel.org> # All applicable Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486 The following commit is reported to have broken s2ram on some platforms: Commit: 0249ed24 ACPICA: Add option to favor 32-bit FADT addresses. The platform reports 2 FACS tables (which is not allowed by ACPI specification) and the new 32-bit address favor rule forces OSPMs to use the FACS table reported via FADT's X_FIRMWARE_CTRL field. The root cause of the reported bug might be one of the followings: 1. BIOS may favor the 64-bit firmware waking vector address when the version of the FACS is greater than 0 and Linux currently only supports resuming from the real mode, so the 64-bit firmware waking vector has never been set and might be invalid to BIOS while the commit enables higher version FACS. 2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the FADT while the commit doesn't set the firmware waking vector address of the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking vector address of the FACS reported by "X_FIRMWARE_CTRL". This patch excludes the cases that can trigger the bugs caused by the root cause 2. There is no handshaking mechanism can be used by OSPM to tell BIOS which FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still be used by BIOS and the 0 value of the 32-bit firmware waking vector might trigger such failure. This patch tries to favor 32bit FACS address in another way where both the FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL" are loaded so that further commit can set firmware waking vector in the both tables to ensure we can exclude the cases that trigger the bugs caused by the root cause 2. The exclusion is split into 2 commits as this commit is also useful for dumping more ACPI tables, it won't get reverted when such exclusion is no longer necessary. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Link: https://github.com/acpica/acpica/commit/f7b86f35 Cc: 3.14.1+ <stable@vger.kernel.org> # 3.14.1+ Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
ACPICA commit 7aa598d711644ab0de5f70ad88f1e2de253115e4 The following commit is reported to have broken s2ram on some platforms: Commit: 0249ed24 ACPICA: Add option to favor 32-bit FADT addresses. The platform reports 2 FACS tables (which is not allowed by ACPI specification) and the new 32-bit address favor rule forces OSPMs to use the FACS table reported via FADT's X_FIRMWARE_CTRL field. The root cause of the reported bug might be one of the followings: 1. BIOS may favor the 64-bit firmware waking vector address when the version of the FACS is greater than 0 and Linux currently only supports resuming from the real mode, so the 64-bit firmware waking vector has never been set and might be invalid to BIOS while the commit enables higher version FACS. 2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the FADT while the commit doesn't set the firmware waking vector address of the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking vector address of the FACS reported by "X_FIRMWARE_CTRL". This patch excludes the cases that can trigger the bugs caused by the root cause 1. ACPI specification says: A. 32-bit FACS address (FIRMWARE_CTRL field in FADT): Physical memory address of the FACS, where OSPM and firmware exchange control information. If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero. A zero value indicates that no FACS is specified by this field. B. 64-bit FACS address (X_FIRMWARE_CTRL field in FADT): 64bit physical memory address of the FACS. This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero. A zero value indicates that no FACS is specified by this field. Thus the 32bit and 64bit firmware waking vector should indicate completely different resuming environment - real mode (1MB addressable) and non real mode (4GB+ addressable) and currently Linux only supports resuming from real mode. This patch enables 64-bit firmware waking vector for selected FACS via new acpi_set_firmware_waking_vectors() API so that it's up to OSPMs to determine which resuming mode should be used by BIOS and ACPICA changes won't trigger the bugs caused by the root cause 1. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021 Link: https://github.com/acpica/acpica/commit/7aa598d7Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 01 7月, 2015 17 次提交
-
-
由 Eric W. Biederman 提交于
Add two functions sysfs_create_mount_point and sysfs_remove_mount_point that hang a permanently empty directory off of a kobject or remove a permanently emptpy directory hanging from a kobject. Export these new functions so modular filesystems can use them. Cc: stable@vger.kernel.org Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Add a new function kernfs_create_empty_dir that can be used to create directory that can not be modified. Update the code to use make_empty_dir_inode when reporting a permanently empty directory to the vfs. Update the code to not allow adding to permanently empty directories. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Add a magic sysctl table sysctl_mount_point that when used to create a directory forces that directory to be permanently empty. Update the code to use make_empty_dir_inode when accessing permanently empty directories. Update the code to not allow adding to permanently empty directories. Update /proc/sys/fs/binfmt_misc to be a permanently empty directory. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
To ensure it is safe to mount proc and sysfs I need to check if filesystems that are mounted on top of them are mounted on truly empty directories. Given that some directories can gain entries over time, knowing that a directory is empty right now is insufficient. Therefore add supporting infrastructure for permantently empty directories that proc and sysfs can use when they create mount points for filesystems and fs_fully_visible can use to test for permanently empty directories to ensure that nothing will be gained by mounting a fresh copy of proc or sysfs. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Miklos Szeredi 提交于
Allow an open fuse device to be "cloned". Userspace can create a clone by: newfd = open("/dev/fuse", O_RDWR) ioctl(newfd, FUSE_DEV_IOC_CLONE, &oldfd); At this point newfd will refer to the same fuse connection as oldfd. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Reviewed-by: NAshish Samant <ashish.samant@oracle.com>
-
由 Eric Dumazet 提交于
Mateusz Guzik reported : Currently obtaining a new file descriptor results in locking fdtable twice - once in order to reserve a slot and second time to fill it. Holding the spinlock in __fd_install() is needed in case a resize is done, or to prevent a resize. Mateusz provided an RFC patch and a micro benchmark : http://people.redhat.com/~mguzik/pipebench.c A resize is an unlikely operation in a process lifetime, as table size is at least doubled at every resize. We can use RCU instead of the spinlock. __fd_install() must wait if a resize is in progress. The resize must block new __fd_install() callers from starting, and wait that ongoing install are finished (synchronize_sched()) resize should be attempted by a single thread to not waste resources. rcu_sched variant is used, as __fd_install() and expand_fdtable() run from process context. It gives us a ~30% speedup using pipebench on a dual Intel(R) Xeon(R) CPU E5-2696 v2 @ 2.50GHz Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMateusz Guzik <mguzik@redhat.com> Acked-by: NMateusz Guzik <mguzik@redhat.com> Tested-by: NMateusz Guzik <mguzik@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Vladimir Zapolskiy 提交于
To be consistent with other kernel interface namings, rename of_get_named_gen_pool() to of_gen_pool_get(). In the original function name "_named" suffix references to a device tree property, which contains a phandle to a device and the corresponding device driver is assumed to register a gen_pool object. Due to a weak relation and to avoid any confusion (e.g. in future possible scenario if gen_pool objects are named) the suffix is removed. [sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename] Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Zapolskiy 提交于
To be consistent with other genalloc interface namings, rename dev_get_gen_pool() to gen_pool_get(). The original omitted "dev_" prefix is removed, since it points to argument type of the function, and so it does not bring any useful information. [akpm@linux-foundation.org: update arch/arm/mach-socfpga/pm.c] Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Mark Brown <broonie@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
Use kvfree() instead of open-coding it. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Gordon 提交于
do_device_access() takes a separate parameter to indicate the direction of data transfer, which it used to use to select the appropriate function out of sg_pcopy_{to,from}_buffer(). However these two functions now have So this patch makes it bypass these wrappers and call the underlying function sg_copy_buffer() directly; this has the same calling style as do_device_access() i.e. a separate direction-of-transfer parameter and no pointers-to-const, so skipping the wrappers not only eliminates the warning, it also make the code simpler :) [akpm@linux-foundation.org: fix very broken build] Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Gordon 提交于
The 'buf' parameter of sg(p)copy_from_buffer() can and should be const-qualified, although because of the shared implementation of _to_buffer() and _from_buffer(), we have to cast this away internally. This means that callers who have a 'const' buffer containing the data to be copied to the sg-list no longer have to cast away the const-ness themselves. It also enables improved coverage by code analysis tools. Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 HATAYAMA Daisuke 提交于
Commit f06e5153 ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced "crash_kexec_post_notifiers" kernel boot option, which toggles wheather panic() calls crash_kexec() before panic_notifiers and dump kmsg or after. The problem is that the commit overlooks panic_on_oops kernel boot option. If it is enabled, crash_kexec() is called directly without going through panic() in oops path. To fix this issue, this patch adds a check to "crash_kexec_post_notifiers" in the condition of kexec_should_crash(). Also, put a comment in kexec_should_crash() to explain not obvious things on this patch. Signed-off-by: NHATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: NBaoquan He <bhe@redhat.com> Tested-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Waiman Long reported that 24TB machines hit OOM during basic setup when struct page initialisation was deferred. One approach is to initialise memory on demand but it interferes with page allocator paths. This patch creates dedicated threads to initialise memory before basic setup. It then blocks on a rw_semaphore until completion as a wait_queue and counter is overkill. This may be slower to boot but it's simplier overall and also gets rid of a section mangling which existed so kswapd could do the initialisation. [akpm@linux-foundation.org: include rwsem.h, use DECLARE_RWSEM, fix comment, remove unneeded cast] Signed-off-by: NMel Gorman <mgorman@suse.de> Cc: Waiman Long <waiman.long@hp.com Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Scott Norton <scott.norton@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
This patch initalises all low memory struct pages and 2G of the highest zone on each node during memory initialisation if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set. That config option cannot be set but will be available in a later patch. Parallel initialisation of struct page depends on some features from memory hotplug and it is necessary to alter alter section annotations. Signed-off-by: NMel Gorman <mgorman@suse.de> Tested-by: NNate Zimmer <nzimmer@sgi.com> Tested-by: NWaiman Long <waiman.long@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
early_pfn_in_nid() and meminit_pfn_in_nid() are small functions that are unnecessarily visible outside memory initialisation. As well as unnecessary visibility, it's unnecessary function call overhead when initialising pages. This patch moves the helpers inline. [akpm@linux-foundation.org: fix build] [mhocko@suse.cz: fix build] Signed-off-by: NMel Gorman <mgorman@suse.de> Tested-by: NNate Zimmer <nzimmer@sgi.com> Tested-by: NWaiman Long <waiman.long@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
__early_pfn_to_nid() use static variables to cache recent lookups as memblock lookups are very expensive but it assumes that memory initialisation is single-threaded. Parallel initialisation of struct pages will break that assumption so this patch makes __early_pfn_to_nid() SMP-safe by requiring the caller to cache recent search information. early_pfn_to_nid() keeps the same interface but is only safe to use early in boot due to the use of a global static variable. meminit_pfn_in_nid() is an SMP-safe version that callers must maintain their own state for. Signed-off-by: NMel Gorman <mgorman@suse.de> Tested-by: NNate Zimmer <nzimmer@sgi.com> Tested-by: NWaiman Long <waiman.long@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nathan Zimmer 提交于
Currently each page struct is set as reserved upon initialization. This patch leaves the reserved bit clear and only sets the reserved bit when it is known the memory was allocated by the bootmem allocator. This makes it easier to distinguish between uninitialised struct pages and reserved struct pages in later patches. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NNathan Zimmer <nzimmer@sgi.com> Signed-off-by: NMel Gorman <mgorman@suse.de> Tested-by: NNate Zimmer <nzimmer@sgi.com> Tested-by: NWaiman Long <waiman.long@hp.com> Tested-by: NDaniel J Blueman <daniel@numascale.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-