When the PX card is off don't try and access it. Avoid hw access
to the card while it's off (e.g., reading back invalid temperature).

v2: be less strict

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=76321Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristian König <christian.koenig@amd.com>

Generic dpm support similar to Kabini. Mullins specific features
will be worked on later.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Avoids a crash in certain cases when thermal irqs are generated
before the display structures have been initialized.

v2: fix the vblank and vrefresh helpers as well

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to properly unregister the hwmon device on driver
unload.

v2: minor clean up

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There seem to be stability issues on a number of cards.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=76286
https://bugzilla.redhat.com/show_bug.cgi?id=1085785
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741619Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: matthias.graf@st.ovqu.de
Cc: bp@alien8.de
Cc: stable@vger.kernel.org

Now that Christian fixed the performance problems with
the feedback buffer in mesa, we can enable variable UVD
clocks.  There are multiple UVD power states associated
with different types and numbers of streams.  This uses
the appropriate state based on that information rather
than always using the fastest UVD clocks which saves some
power.  One possible downside is that this may adversely
affect decode benchmarks since these power states target
specific playback requirements rather than maximum
performance.  If that becomes an issue, we can add a
sysfs attribute to force the max UVD state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

We no longer need to take the ring lock while checking for
a gpu lockup, so just cleanup the code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

enable vce states when vce is active.  When vce is active,
it adjusts the currently selected state (performance, battery,
uvd, etc.)

v2: add code comments
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Still unstable on some boards.

Bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73053
https://bugzilla.kernel.org/show_bug.cgi?id=68571Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: 3.13 <stable@vger.kernel.org> # 3.13

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

v2: Fix radeon_drv.c compile warning (Mario)

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

It's never allocated on systems without an ATOMBIOS or COMBIOS ROM.

Should fix an oops I encountered while resetting the GPU after a lockup
on my PowerBook with an RV350.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Dynamic power mangement works reliably now, so
enable it by default.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Dynamic power mangement works reliably now, so
enable it by default.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need more control over the ordering of dpm init with
respect to the rest of the asic.  Specifically, the SMC
has to be initialized before the rlc and cg/pg.  The pm
code currently initializes late in the driver, but we need
it to happen much earlier so move pm handling into the asic
specific callbacks.

This makes dpm more reliable and makes clockgating work
properly on CIK parts and should help on SI parts as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Right now it's called right after enable, but after
reworking the dpm init order, it will get called later
to accomodate loading the smc early, but enabling
thermal interrupts and block powergating later after
the ring tests are complete.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Certain features need to be enabled after ring tests
(e.g., powergating, etc.).  Add a function pointer
to split out late enable features.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to check rdev->pm.num_power_states; this is a vestige
of the old pm code.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since commit ec39f64b ("drm/radeon/dpm: Convert to use
devm_hwmon_register_with_groups") radeon_hwmon_init() is using
hwmon_device_register_with_groups(), which sets `rdev' as a device
private driver_data, while hwmon_attributes_visible() and
radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.

Fix them by using dev_get_drvdata(), in order to avoid this oops:

  BUG: unable to handle kernel paging request at 0000000000001e28
  IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
  PGD 15057e067 PUD 151a8e067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP
  Call Trace:
    internal_create_group+0x114/0x1d9
    sysfs_create_group+0xe/0x10
    sysfs_create_groups+0x22/0x5f
    device_add+0x34f/0x501
    device_register+0x15/0x18
    hwmon_device_register_with_groups+0xb5/0xed
    radeon_hwmon_init+0x56/0x7c [radeon]
    radeon_pm_init+0x134/0x7e5 [radeon]
    radeon_modeset_init+0x75f/0x8ed [radeon]
    radeon_driver_load_kms+0xc6/0x187 [radeon]
    drm_dev_register+0xf9/0x1b4 [drm]
    drm_get_pci_dev+0x98/0x129 [drm]
    radeon_pci_probe+0xa3/0xac [radeon]
    pci_device_probe+0x6e/0xcf
    driver_probe_device+0x98/0x1c4
    __driver_attach+0x5c/0x7e
    bus_for_each_dev+0x7b/0x85
    driver_attach+0x19/0x1b
    bus_add_driver+0x104/0x1ce
    driver_register+0x89/0xc5
    __pci_register_driver+0x58/0x5b
    drm_pci_init+0x86/0xea [drm]
    radeon_init+0x97/0x1000 [radeon]
    do_one_initcall+0x7f/0x117
    load_module+0x1583/0x1bb4
    SyS_init_module+0xa0/0xaf
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ec39f64b (drm/radeon/dpm: Convert
to use devm_hwmon_register_with_groups) converted one usage of
dev_get_drvdata, but there were two more.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72457Signed-off-by: NMartin Andersson <g02maran@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the code and fix race condition seen because
attribute files were created after hwmon device registration.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After adjusting the dpm parameters this seems to be
stable on most TN systems.  DPM is important for APUs
since the boot clocks are generally pretty low.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This updates the CI dpm (dynamic power management)
support for hawaii.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

This should not introduce any change in functionality or behaviour
in radeon-kms, just a reshuffling of code.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If the user has forced the state high or low, retain that preference
even when we switch power states.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=70654Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the thermal state is active, we are in the lowest performance level
to cool down the chip.  Don't let the user force it higher.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to be stable on them.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to be stable on them.  There are still some issues
with the performance states staying in the highest levels
on certain cards when multiple monitors are attached, but
being that the the cards are always in their highest power
state at boot up anyway, this doesn't really change anything
and improves things in all other cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to be stable on them.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to be stable on them and improves peformance
as most SI asics have very low boot clocks.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DPM seems to be stable on these asics and it drastically
improves performance depending on the boot clocks.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoids spamming the system log for chips where dpm is enabled by
default, but prints then messages when users force it on for other
asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always use the regular UVD state for now.  This fixes
a performance regression with UVD playback on certain APUs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a partial revert of c6cf7777.

We need to take into account the clk voltage dependencies of the
board.  Not doing so can lead to stability issues on certain
boards if the clks exceed the levels in the dep tables.

DPM already takes that into account, so for optimal performance,
use DPM.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Calling force_performance_level() from set_power_state()
doesn't work on some asics because the current power
state pointer has not been properly updated at that point.
Move the calls to force_performance_level() out of the
asic specific set_power_state() functions and into
the main power state sequence.

Fixes dpm resume on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm is a pm feature for sharing the power budget between
the GPU and the CPU on APUs.  It needs to be enabled or
disabled in certain circumstances.  For now, disable it
when on battery and enable it when on AC power.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The hwmon sysfs interface allows exposing temperature limits. The "max"
and "min" thresholds will be exposed as a critical high limit and its
hysteresis value, respectively. This gives the user a better idea of how
well cooling is doing and whether it is sufficient.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

You can get the driver data from struct device directly, there's no
need to get the PCI device first.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Starting on CIK, multi-media blocks like UVD no longer
have special power state.  Rather they have their own
DPM implementation which adjusts their clocks dynamically
when active.  When they are not active, the blocks are
powergated to save power.

v2: add missing pm locks
v3: rebase on uvd state selection rework
v4: fix inverted logic typo noticed by Christian
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>