Have the caller pass the address of an rbd_options structure to
rbd_add_parse_args(), to be initialized with the information
gleaned as a result of the parse.

I know, this is another near-reversal of a recent change...
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The snapshot name returned by rbd_add_parse_args() just gets saved
in the rbd_dev eventually.  So just do that inside that function and
do away with the snap_name argument, both in rbd_add_parse_args()
and rbd_dev_set_mapping().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

They "options" argument to rbd_add_parse_args() (and it's partner
options_size) is now only needed within the function, so there's no
need to have the caller allocate and pass the options buffer.  Just
allocate the options buffer within the function using dup_token().

Also distinguish between failures due to failed memory allocation
and failing because a required argument was missing.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The value returned in the "snap_name_len" argument to
rbd_add_parse_args() is never actually used, so get rid of it.

The snap_name_len recorded in rbd_dev_v2_snap_name() is not
useful either, so get rid of that too.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch makes rbd_add_parse_args() be the single place all
argument parsing occurs for an image map request:
    - Move the ceph_parse_options() call into that function
    - Use local variables rather than parameters to hold the list
      of monitor addresses supplied
    - Rather than returning it, pass the snapshot name (and its
      length) back via parameters
    - Have the function return a ceph_options structure pointer
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move option parsing out of rbd_get_client() and into its caller.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A Boolean field "snap_exists" in an rbd mapping is used to indicate
whether a mapped snapshot has been removed from an image's snapshot
context, to stop sending requests for that snapshot as soon as we
know it's gone.

Generalize the interpretation of this field so it applies to
non-snapshot (i.e. "head") mappings.  That is, define its value
to be false until the mapping has been set, and then define it to be
true for both snapshot mappings or head mappings.

Rename the field "exists" to reflect the broader interpretation.
The rbd_mapping structure is on its way out, so move the field
back into the rbd_device structure.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Moving the snap_id and snap_name fields into the separate
rbd_mapping structure was misguided.  (And in time, perhaps
we'll do away with that structure altogether...)

Move these fields back into struct rbd_device.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If a format 2 image has a parent, its pool id will be specified
using a 64-bit value.  Change the pool id we save for an image to
match that.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If rbd_dev_snaps_update() has ever been called for an rbd device
structure there could be snapshot structures on its snaps list.
In rbd_add(), this function is called but a subsequent error
path neglected to clean up any of these snapshots.

Add a call to rbd_remove_all_snaps() in the appropriate spot to
remedy this.  Change a couple of error labels to be a little
clearer while there.

Drop the leading underscores from the function name; there's nothing
special about that function that they might signify.  As suggested
in review, the leading underscores in __rbd_remove_snap_dev() have
been removed as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When processing a request, rbd_rq_fn() makes clones of the bio's in
the request's bio chain and submits the results to osd's to be
satisfied.  If a request bio straddles the boundary between objects
backing the rbd image, it must be represented by two cloned bio's,
one for the first part (at the end of one object) and one for the
second (at the beginning of the next object).

This has been handled by a function bio_chain_clone(), which
includes an interface only a mother could love, and which has
been found to have other problems.

This patch defines two new fairly generic bio functions (one which
replaces bio_chain_clone()) to help out the situation, and then
revises rbd_rq_fn() to make use of them.

First, bio_clone_range() clones a portion of a single bio, starting
at a given offset within the bio and including only as many bytes
as requested.  As a convenience, a request to clone the entire bio
is passed directly to bio_clone().

Second, bio_chain_clone_range() performs a similar function,
producing a chain of cloned bio's covering a sub-range of the
source chain.  No bio_pair structures are used, and if successful
the result will represent exactly the specified range.

Using bio_chain_clone_range() makes bio_rq_fn() a little easier
to understand, because it avoids the need to pass very much
state information between consecutive calls.  By avoiding the need
to track a bio_pair structure, it also eliminates the problem
described here:  http://tracker.newdream.net/issues/2933

Note that a block request (and therefore the complete length of
a bio chain processed in rbd_rq_fn()) is an unsigned int, while
the result of rbd_segment_length() is u64.  This change makes
this range trunctation explicit, and trips a bug if the the
segment boundary is too far off.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Ensure that we set the err value correctly so that we do not pass a 0
value to ERR_PTR and confuse the calling code.  (In particular,
osd_client.c handle_map() will BUG(!newmap)).
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

The rbd_device structure has an embedded rbd_options structure.
Such a structure is needed to work with the generic ceph argument
parsing code, but there's no need to keep it around once argument
parsing is done.

Use a local variable to hold the rbd options used in parsing in
rbd_get_client(), and just transfer its content (it's just a
read_only flag) into the field in the rbd_mapping sub-structure
that requires that information.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NDan Mick <dan.mick@inktank.com>

The aim of this patch is to make what's going on rbd_merge_bvec() a
bit more obvious than it was before.  This was an issue when a
recent btrfs bug led us to question whether the merge function was
working correctly.

Use "obj" rather than "chunk" to indicate the units whose boundaries
we care about we call (rados) "objects".
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NDan Mick <dan.mick@inktank.com>

Change RBD_MAX_SNAP_NAME_LEN to be based on NAME_MAX.  That is a
practical limit for the length of a snapshot name (based on the
presence of a directory using the name under /sys/bus/rbd to
represent the snapshot).

The /sys entry is created by prefixing it with "snap_"; define that
prefix symbolically, and take its length into account in defining
the snapshot name length limit.

Enforce the limit in rbd_add_parse_args().  Also delete a dout()
call in that function that was not meant to be committed.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NDan Mick <dan.mick@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This adds a verification that an rbd image's object order is
within the upper and lower bounds supported by this implementation.

It must be at least 9 (SECTOR_SHIFT), because the Linux bio system
assumes that minimum granularity.

It also must be less than 32 (at the moment anyway) because there
exist spots in the code that store the size of a "segment" (object
backing an rbd image) in a signed int variable, which can be 32 bits
including the sign.  We should be able to relax this limit once
we've verified the code uses 64-bit types where needed.

Note that the CLI tool already limits the order to the range 12-25.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The two calls to rbd_do_op() from rbd_rq_fn() differ only in the
value passed for the snapshot id and the snapshot context.

For reads the snapshot always comes from the mapping, and for writes
the snapshot id is always CEPH_NOSNAP.

The snapshot context is always null for reads.  For writes, the
snapshot context always comes from the rbd header, but it is
acquired under protection of header semaphore and could change
thereafter, so we can't simply use what's available inside
rbd_do_op().

Eliminate the snapid parameter from rbd_do_op(), and set it
based on the I/O direction inside that function instead.  Always
pass the snapshot context acquired in the caller, but reset it
to a null pointer inside rbd_do_op() if the operation is a read.

As a result, there is no difference in the read and write calls
to rbd_do_op() made in rbd_rq_fn(), so just call it unconditionally.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The only callers of rbd_do_op() are in rbd_rq_fn(), where call one
is used for writes and the other used for reads.  The request passed
to rbd_do_op() already encodes the I/O direction, and that
information can be used inside the function to set the opcode and
flags value (rather than passing them in as arguments).

So get rid of the opcode and flags arguments to rbd_do_op().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Both rbd_req_read() and rbd_req_write() are simple wrapper routines
for rbd_do_op(), and each is only called once.  Replace each wrapper
call with a direct call to rbd_do_op(), and get rid of the wrapper
functions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The name of the "read-only" mapping option was inadvertently changed
in this commit:

    f84344f3 rbd: separate mapping info in rbd_dev

Revert that hunk to return it to what it should be.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NDan Mick <dan.mick@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When rbd_dev_probe() calls rbd_dev_image_id() it expects to get
a 0 return code if successful, but it is getting a positive value.

The reason is that rbd_dev_image_id() returns the value it gets from
rbd_req_sync_exec(), which returns the number of bytes read in as a
result of the request.  (This ultimately comes from
ceph_copy_from_page_vector() in rbd_req_sync_op()).

Force the return value to 0 when successful in rbd_dev_image_id().
Do the same in rbd_dev_v2_object_prefix().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>
Reviewed-by: NDan Mick <dan.mick@inktank.com>

In rbd_dev_id_put(), there's a loop that's intended to determine
the maximum device id in use.  But it isn't doing that at all,
the effect of how it's written is to simply use the just-put id
number, which ignores whole purpose of this function.

Fix the bug.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

set_request_path_attr() checks for NULL ptr before calling strlen()

This fixes http://tracker.newdream.net/issues/3404Signed-off-by: NDavid Zafman <david.zafman@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The ceph_on_in_msg_alloc() method calls the ->alloc_msg() helper which
may return NULL.  It also drops con->mutex while it allocates a message,
which means that the connection state may change (e.g., get closed).  If
that happens, we clean up and bail out.  Avoid calling ceph_msg_put() on
a NULL return value and triggering a crash.

This was observed when an ->alloc_msg() call races with a timeout that
resends a zillion messages and resets the connection, and ->alloc_msg()
returns NULL (because the request was resent to another target).

Fixes http://tracker.newdream.net/issues/3342Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Call to d_find_alias() needs a corresponding dput()

This fixes http://tracker.newdream.net/issues/3271Signed-off-by: NDavid Zafman <david.zafman@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Now that v2 images support is fully implemented, have
rbd_dev_v2_probe() return 0 to indicate a successful probe.

(Note that an image that implements layering will fail
the probe early because of the feature chekc.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Version 2 images have two sets of feature bit fields.  The first
indicates features possibly used by the image.  The second indicates
features that the client *must* support in order to use the image.

When an image (or snapshot) is first examined, we need to make sure
that the local implementation supports the image's required
features.  If not, fail the probe for the image.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a new function rbd_dev_v2_refresh() to update/refresh the
snapshot context for a format version 2 rbd image.  This function
will update anything that is not fixed for the life of an rbd
image--at the moment this is mainly the snapshot context and (for
a base mapping) the size.

Update rbd_refresh_header() so it selects which function to use
based on the image format.

Rename __rbd_refresh_header() to be rbd_dev_v1_refresh()
to be consistent with the naming of its version 2 counterpart.
Similarly rename rbd_refresh_header() to be rbd_dev_refresh().

Unrelated--we use rbd_image_format_valid() here.  Delete the other
use of it, which was primarily put in place to ensure that function
was referenced at the time it was defined.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Encapsulate the code that handles updating the size of a mapping
after an rbd image has been refreshed.  This is done in anticipation
of the next patch, which will make this common code for format 1 and
2 images.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch defines a single function, queue_con_delay() to call
queue_delayed_work() for a connection.  It basically generalizes
what was previously queue_con() by adding the delay argument.
queue_con() is now a simple helper that passes 0 for its delay.
queue_con_delay() returns 0 if it queued work or an errno if it
did not for some reason.

If con_work() finds the BACKOFF flag set for a connection, it now
calls queue_con_delay() to handle arranging to start again after a
delay.

Note about connection reference counts:  con_work() only ever gets
called as a work item function.  At the time that work is scheduled,
a reference to the connection is acquired, and the corresponding
con_work() call is then responsible for dropping that reference
before it returns.

Previously, the backoff handling inside con_work() silently handed
off its reference to delayed work it scheduled.  Now that
queue_con_delay() is used, a new reference is acquired for the
newly-scheduled work, and the original reference is dropped by the
con->ops->put() call at the end of the function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Both ceph_fault() and con_work() include handling for imposing a
delay before doing further processing on a faulted connection.
The latter is used only if ceph_fault() is unable to.

Instead, just let con_work() always be responsible for implementing
the delay.  After setting up the delay value, set the BACKOFF flag
on the connection unconditionally and call queue_con() to ensure
con_work() will get called to handle it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

If ceph_fault() is unable to queue work after a delay, it sets the
BACKOFF connection flag so con_work() will attempt to do so.

In con_work(), when BACKOFF is set, if queue_delayed_work() doesn't
result in newly-queued work, it simply ignores this condition and
proceeds as if no backoff delay were desired.  There are two
problems with this--one of which is a bug.

The first problem is simply that the intended behavior is to back
off, and if we aren't able queue the work item to run after a delay
we're not doing that.

The only reason queue_delayed_work() won't queue work is if the
provided work item is already queued.  In the messenger, this
means that con_work() is already scheduled to be run again.  So
if we simply set the BACKOFF flag again when this occurs, we know
the next con_work() call will again attempt to hold off activity
on the connection until after the delay.

The second problem--the bug--is a leak of a reference count.  If
queue_delayed_work() returns 0 in con_work(), con->ops->put() drops
the connection reference held on entry to con_work().  However,
processing is (was) allowed to continue, and at the end of the
function a second con->ops->put() is called.

This patch fixes both problems.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

A pgoff_t is defined (by default) to have type (unsigned long).  On
architectures such as i686 that's a 32-bit type.  The ceph address
space code was attempting to produce 64 bit offsets by shifting a
page's index by PAGE_CACHE_SHIFT, but the result was not what was
desired because the shift occurred before the result got promoted
to 64 bits.

Fix this by converting all uses of page->index used in this way to
use the page_offset() macro, which ensures the 64-bit result has the
intended value.

This fixes http://tracker.newdream.net/issues/3112Reported-by: NMohamed Pakkeer <pakkeer.mohideen@realimage.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

If the user calls GET_DATALOC on a file with an invalid (e.g.,
zeroed) layout, return EIO to userland.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

This shouldn't actually be possible because the layout struct is
constructed from the RBD header and validated then.

[elder@inktank.com: converted BUG() call to equivalent rbd_assert()]
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

If we are creating an osd request and get an invalid layout, return
an EINVAL to the caller.  We switch up the return to have an error
code instead of NULL implying -ENOMEM.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

If we encounter an invalid (e.g., zeroed) mapping, return an error
and avoid a divide by zero.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NSage Weil <sage@inktank.com>

When i >= newmap->m_max_mds, ceph_mdsmap_get_addr(newmap, i) return
NULL. Passing NULL to memcmp() triggers oops.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>

There are three fields that are not yet updated for format 2 rbd
image headers:  the version of the header object; the encryption
type; and the compression type.  There is no interface defined for
fetching the latter two, so just initialize them explicitly to 0 for
now.

Change rbd_dev_v2_snap_context() so the caller can be supplied the
version for the header object.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>