Xilinx Zynq pl330 dma driver has 9 irqs which all have to
be used by the driver to get it work properly.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If we're running a kernel compiled with SMP_ON_UP=y and the
hardware only supports UP operation there isn't any
smp_cross_call function assigned. Unfortunately, we call
smp_cross_call() unconditionally in arch_irq_work_raise() and
crash the kernel on UP devices. Check to make sure we're running
on an SMP device before calling smp_cross_call() here.

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000005 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc6-00018-g8d451442-dirty #16
task: de05b440 ti: de05c000 task.ti: de05c000
PC is at 0x0
LR is at arch_irq_work_raise+0x3c/0x48
pc : [<00000000>]    lr : [<c0019590>]    psr: 60000193
sp : de05dd60  ip : 00000001  fp : 00000000
r10: c085e2f0  r9 : de05c000  r8 : c07be0a4
r7 : de05c000  r6 : de05c000  r5 : c07c5778  r4 : c0824554
r3 : 00000000  r2 : 00000000  r1 : 00000006  r0 : c0529a58
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0xde05c248)
Stack: (0xde05dd60 to 0xde05e000)
dd60: c07b9dbc c00cb2dc 00000001 c08242c0 c08242c0 60000113 c07be0a8 c00b0590
dd80: de05c000 c085e2f0 c08242c0 c08242c0 c1414c28 c00b07cc de05b440 c1414c28
dda0: c08242c0 c00b0af8 c0862bb0 c0862db0 c1414cd8 de05c028 c0824840 de05ddb8
ddc0: 00000000 00000009 00000001 00000024 c07be0a8 c07be0a4 de05c000 c085e2f0
dde0: 00000000 c004a4b0 00000010 de00d2dc 00000054 00000100 00000024 00000000
de00: de05c028 0000000a ffff8ae7 00200040 00000016 de05c000 60000193 de05c000
de20: 00000054 00000000 00000000 00000000 00000000 c004a704 00000000 de05c008
de40: c07ba254 c004aa1c c07c5778 c0014b70 fa200000 00000054 de05de80 c0861244
de60: 00000000 c0008634 de05b440 c051c778 20000113 ffffffff de05deb4 c051d0a4
de80: 00000001 00000001 00000000 de05b440 c082afac de057ac0 de057ac0 de0443c0
dea0: 00000000 00000000 00000000 00000000 c082afbc de05dec8 c009f2a0 c051c778
dec0: 20000113 ffffffff 00000000 c016edb0 00000000 000002b0 de057ac0 de057ac0
dee0: 00000000 c016ee40 c0875e50 de05df2e de057ac0 00000000 00000013 00000000
df00: 00000000 c016f054 de043600 de0443c0 c008eb38 de004ec0 c0875e50 c008eb44
df20: 00000012 00000000 00000000 3931f0f8 00000000 00000000 00000014 c0822e84
df40: 00000000 c008ed2c 00000000 00000000 00000000 c07b7490 c07b7490 c075ab3c
df60: 00000000 c00701ac 00000002 00000000 c0070160 dffadb73 7bf8edb4 00000000
df80: c051092c 00000000 00000000 00000000 00000000 00000000 00000000 c0510934
dfa0: de05aa40 00000000 c051092c c0013ce8 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 07efffe5 4dfac6f5
[<c0019590>] (arch_irq_work_raise+0x3c/0x48) from [<c00cb2dc>] (irq_work_queue+0xe4/0xf8)
[<c00cb2dc>] (irq_work_queue+0xe4/0xf8) from [<c00b0590>] (rcu_accelerate_cbs+0x1d4/0x1d8)
[<c00b0590>] (rcu_accelerate_cbs+0x1d4/0x1d8) from [<c00b07cc>] (rcu_start_gp+0x34/0x48)
[<c00b07cc>] (rcu_start_gp+0x34/0x48) from [<c00b0af8>] (rcu_process_callbacks+0x318/0x608)
[<c00b0af8>] (rcu_process_callbacks+0x318/0x608) from [<c004a4b0>] (__do_softirq+0x114/0x2a0)
[<c004a4b0>] (__do_softirq+0x114/0x2a0) from [<c004a704>] (do_softirq+0x6c/0x74)
[<c004a704>] (do_softirq+0x6c/0x74) from [<c004aa1c>] (irq_exit+0xac/0x100)
[<c004aa1c>] (irq_exit+0xac/0x100) from [<c0014b70>] (handle_IRQ+0x54/0xb4)
[<c0014b70>] (handle_IRQ+0x54/0xb4) from [<c0008634>] (omap3_intc_handle_irq+0x60/0x74)
[<c0008634>] (omap3_intc_handle_irq+0x60/0x74) from [<c051d0a4>] (__irq_svc+0x44/0x5c)
Exception stack(0xde05de80 to 0xde05dec8)
de80: 00000001 00000001 00000000 de05b440 c082afac de057ac0 de057ac0 de0443c0
dea0: 00000000 00000000 00000000 00000000 c082afbc de05dec8 c009f2a0 c051c778
dec0: 20000113 ffffffff
[<c051d0a4>] (__irq_svc+0x44/0x5c) from [<c051c778>] (_raw_spin_unlock_irq+0x28/0x2c)
[<c051c778>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c016edb0>] (proc_alloc_inum+0x30/0xa8)
[<c016edb0>] (proc_alloc_inum+0x30/0xa8) from [<c016ee40>] (proc_register+0x18/0x130)
[<c016ee40>] (proc_register+0x18/0x130) from [<c016f054>] (proc_mkdir_data+0x44/0x6c)
[<c016f054>] (proc_mkdir_data+0x44/0x6c) from [<c008eb44>] (register_irq_proc+0x6c/0x128)
[<c008eb44>] (register_irq_proc+0x6c/0x128) from [<c008ed2c>] (init_irq_proc+0x74/0xb0)
[<c008ed2c>] (init_irq_proc+0x74/0xb0) from [<c075ab3c>] (kernel_init_freeable+0x84/0x1c8)
[<c075ab3c>] (kernel_init_freeable+0x84/0x1c8) from [<c0510934>] (kernel_init+0x8/0x150)
[<c0510934>] (kernel_init+0x8/0x150) from [<c0013ce8>] (ret_from_fork+0x14/0x2c)
Code: bad PC value

Fixes: bf18525f "ARM: 7872/1: Support arch_irq_work_raise() via self IPIs"
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

By default, IRQ work is run from the tick interrupt (see
irq_work_run() in update_process_times()). When we're in full
NOHZ mode, restarting the tick requires the use of IRQ work and
if the only place we run IRQ work is in the tick interrupt we
have an unbreakable cycle. Implement arch_irq_work_raise() via
self IPIs to break this cycle and get the tick started again.
Note that we implement this via IPIs which are only available on
SMP builds. This shouldn't be a problem because full NOHZ is only
supported on SMP builds anyway.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-footbridge/netwinder-hw.c:695:2: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type
arch/arm/mach-footbridge/netwinder-hw.c:702:2: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type
arch/arm/mach-footbridge/netwinder-hw.c:712:2: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type
arch/arm/mach-footbridge/netwinder-hw.c:714:2: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

CPU hotplug and kexec rely on smp_ops.cpu_kill(), which is supposed
to wait for the CPU to park or power down, and perform the last
rites (such as disabling clocks etc., where the platform doesn't do
this automatically).

kexec in particular is unsafe without performing this
synchronisation to park secondaries.  Without it, the secondaries
might not be parked when kexec trashes the kernel.

There is no generic way to do this synchronisation, so a new mcpm
platform_ops method power_down_finish() is added by this patch.

The new method is mandatory.  A platform which provides no way to
detect when CPUs are parked is likely broken.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch factors the logical-to-physical CPU translation out of
mcpm_boot_secondary(), so that it can be reused elsewhere.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This removes the XSCALE_PMU Kconfig param, which is defined
but no longer used in makefiles and source files.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use CONFIG_ARCH_PHYS_ADDR_T_64BIT to determine
if ignoring or truncating of memory banks is
neccessary. This may be needed in the case of
64-bit memory bank addresses but when phys_addr_t
is kept 32-bit.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The DTB and/or the kernel command line may pass
64-bit addresses regardless of kernel configuration,
so update arm_add_memory() to take 64-bit arguments
independently of the phys_addr_t size.

This allows non-wrapping handling of high memory
banks such as the second memory bank of APE6EVM
(at 0x2_0000_0000) in case of 32-bit phys_addr_t.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is the ARM part of Christoph's patchset cleaning up the various
uses of __get_cpu_var across the tree.

The idea is to convert __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations
that use the offset. Thereby address calculations are avoided and fewer
registers are used when code is generated.

[will: fixed debug ref counting checks and pcpu array accesses]
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This code is becoming duplicated in many places.  So let's consolidate
it into a handy macro that is known to be right and available for reuse.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add debug uart support for MSM8974. This patch adds a Kconfig
entry and the base address for the debug uart.
Signed-off-by: NRohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Create the hidden config DEBUG_MSM_UART and clean-up
the default selection for CONFIG_DEBUG_LL_INCLUDE.
Acked-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NRohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The memory pinning code in uaccess_with_memcpy.c does not check
for HugeTLB or THP pmds, and will enter an infinite loop should
a __copy_to_user or __clear_user occur against a huge page.

This patch adds detection code for huge pages to pin_page_for_write.
As this code can be executed in a fast path it refers to the actual
pmds rather than the vma. If a HugeTLB or THP is found (they have
the same pmd representation on ARM), the page table spinlock is
taken to prevent modification whilst the page is pinned.

On ARM, huge pages are only represented as pmds, thus no huge pud
checks are performed. (For huge puds one would lock the page table
in a similar manner as in the pmd case).

Two helper functions are introduced; pmd_thp_or_huge will check
whether or not a page is huge or transparent huge (which have the
same pmd layout on ARM), and pmd_hugewillfault will detect whether
or not a page fault will occur on write to the page.

Running the following test (with the chunking from read_zero
removed):
 $ dd if=/dev/zero of=/dev/null bs=10M count=1024
Gave:  2.3 GB/s backed by normal pages,
       2.9 GB/s backed by huge pages,
       5.1 GB/s backed by huge pages, with page mask=HPAGE_MASK.

After some discussion, it was decided not to adopt the HPAGE_MASK,
as this would have a significant detrimental effect on the overall
system latency due to page_table_lock being held for too long.
This could be revisited if split huge page locks are adopted.
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Reviewed-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The work-around for A15 errata 798181 is not needed if appropriate ECO
fixes have been applied to r3p2 and earlier core revisions. This can be
checked by reading REVIDR register bits 4 and 9. If only bit 4 is set,
then the IPI broadcast can be skipped.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Our spinlocks are only 32-bit (2x16-bit tickets) and, on processors
with 64-bit atomic instructions, cmpxchg64 makes use of the double-word
exclusive accessors.

This patch wires up the cmpxchg-based lockless lockref implementation
for ARM.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch introduces cmpxchg64_relaxed for arm, which performs a 64-bit
cmpxchg operation without barrier semantics. cmpxchg64_local is updated
to use the new operation.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Our cmpxchg64 macros are wrappers around atomic64_cmpxchg. Whilst this is
great for code re-use, there is a case for barrier-less cmpxchg where it
is known to be safe (for example cmpxchg64_local and cmpxchg-based
lockrefs).

This patch introduces a 64-bit cmpxchg implementation specifically
for the cmpxchg64_* macros, so that it can be later used by the lockref
code.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This implements output of debug messages on efm32 SoCs.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With LPAE enabled, physical address space is larger than 4GB. Allow mapping any
part of it via /dev/mem by using PHYS_MASK to determine valid range.

PHYS_MASK covers 40 bits with LPAE enabled and 32 bits otherwise.
Reported-by: NVassili Karpov <av1474@comtv.ru>
Signed-off-by: NSergey Dyasly <dserrg@gmail.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pull btrfs fix from Chris Mason:
 "Sage hit a deadlock with ceph on btrfs, and Josef tracked it down to a
  regression in our initial rc1 pull.  When doing nocow writes we were
  sometimes starting a transaction with locks held"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: release path before starting transaction in can_nocow_extent

Pull ACPI and power management fixes from Rafael Wysocki:

 - intel_pstate fix for misbehavior after system resume if sysfs
   attributes are set in a specific way before the corresponding suspend
   from Dirk Brandewie.

 - A recent intel_pstate fix has no effect if unsigned long is 32-bit,
   so fix it up to cover that case as well.

 - The s3c64xx cpufreq driver was not updated when the index field of
   struct cpufreq_frequency_table was replaced with driver_data, so
   update it now.  From Charles Keepax.

 - The Kconfig help text for ACPI_BUTTON still refers to
   /proc/acpi/event that has been dropped recently, so modify it to
   remove that reference.  From Krzysztof Mazur.

 - A Lan Tianyu's change adds a missing mutex unlock to an error code
   path in acpi_resume_power_resources().

 - Some code related to ACPI power resources, whose very purpose is
   questionable to put it lightly, turns out to cause problems to happen
   during testing on real systems, so remove it completely (we may
   revisit that in the future if there's a compelling enough reason).
   From Rafael J Wysocki and Aaron Lu.

* tag 'pm+acpi-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Drop two functions that are not used any more
  ATA / ACPI: remove power dependent device handling
  cpufreq: s3c64xx: Rename index to driver_data
  ACPI / power: Drop automaitc resume of power resource dependent devices
  intel_pstate: Fix type mismatch warning
  cpufreq / intel_pstate: Fix max_perf_pct on resume
  ACPI: remove /proc/acpi/event from ACPI_BUTTON help
  ACPI / power: Release resource_lock after acpi_power_get_state() return error

Pull x86 fixes from Ingo Molnar:
 "Two fixlets:

   - fix a (rare-config) build bug
   - fix a next-gen SGI/UV hw/firmware enumeration bug"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Update UV3 hub revision ID
  x86/microcode: Correct Kconfig dependencies

We can't be holding tree locks while we try to start a transaction, we will
deadlock.  Thanks,
Reported-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

* acpi-fixes:
  ACPI / PM: Drop two functions that are not used any more
  ATA / ACPI: remove power dependent device handling
  ACPI / power: Drop automaitc resume of power resource dependent devices
  ACPI: remove /proc/acpi/event from ACPI_BUTTON help
  ACPI / power: Release resource_lock after acpi_power_get_state() return error

* pm-fixes:
  cpufreq: s3c64xx: Rename index to driver_data
  intel_pstate: Fix type mismatch warning
  cpufreq / intel_pstate: Fix max_perf_pct on resume

Pull CIFS fixes from Steve French:
 "Five small cifs fixes (includes fixes for: unmount hang, 2 security
  related, symlink, large file writes)"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: ntstatus_to_dos_map[] is not terminated
  cifs: Allow LANMAN auth method for servers supporting unencapsulated authentication methods
  cifs: Fix inability to write files >2GB to SMB2/3 shares
  cifs: Avoid umount hangs with smb2 when server is unresponsive
  do not treat non-symlink reparse points as valid symlinks

Merge tag 'driver-core-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is one fix for the hotplug memory path that resolves a regression
  when removing memory that showed up in 3.12-rc1"

* tag 'driver-core-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Release device_hotplug_lock when store_mem_state returns EINVAL

Pull USB fixes from Greg KH:
 "Here are some USB fixes and new device ids for 3.12-rc6

  The largest change here is a bunch of new device ids for the option
  USB serial driver for new Huawei devices.  Other than that, just some
  small bug fixes for issues that people have reported (run-time and
  build-time), nothing major"

* tag 'usb-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: usb_phy_gen: refine conditional declaration of usb_nop_xceiv_register
  usb: misc: usb3503: Fix compile error due to incorrect regmap depedency
  usb/chipidea: fix oops on memory allocation failure
  usb-storage: add quirk for mandatory READ_CAPACITY_16
  usb: serial: option: blacklist Olivetti Olicard200
  USB: quirks: add touchscreen that is dazzeled by remote wakeup
  Revert "usb: musb: gadget: fix otg active status flag"
  USB: quirks.c: add one device that cannot deal with suspension
  USB: serial: option: add support for Inovia SEW858 device
  USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.
  USB: support new huawei devices in option.c
  usb: musb: start musb on the udc side, too
  xhci: Fix spurious wakeups after S5 on Haswell
  xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers
  xhci: quirk for extra long delay for S4
  xhci: Don't enable/disable RWE on bus suspend/resume.

Pull serial driver fixes from Greg KH:
 "Here are two serial driver fixes for your tree.  One is a revert of a
  patch that causes a build error, the other is a fix to provide the
  correct brace placement which resolves a bug where the driver was not
  working properly"

* tag 'tty-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: vt8500: add missing braces
  Revert "serial: i.MX: evaluate linux,stdout-path property"

Pull char/misc driver fixes from Greg KH:
 "Here are some small iio and w1 driver fixes for 3.12-rc6.

  There is also a hyper-v fix in here, which turned out to be incorrect,
  so it was reverted.  That will probably have to wait unto 3.13-rc1 to
  get accepted as it's still being discussed"

* tag 'char-misc-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "Drivers: hv: vmbus: Fix a bug in channel rescind code"
  Drivers: hv: vmbus: Fix a bug in channel rescind code
  iio:buffer: Free active scan mask in iio_disable_all_buffers()
  iio: frequency: adf4350: add missing clk_disable_unprepare() on error in adf4350_probe()
  w1 - call request_module with w1 master mutex unlocked
  w1 - fix fops in w1_bus_notify

Pull sound fixes from Takashi Iwai:
 "All reasonably small fixes as rc6: a HD-audio mic fix, a us122l mmap
  regression fix, and kernel memory leak fix in hdsp driver.  Hopefully
  this will be the last pull request for 3.12..."

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hdsp - info leak in snd_hdsp_hwdep_ioctl()
  ALSA: us122l: Fix pcm_usb_stream mmapping regression
  ALSA: hda - Fix inverted internal mic not indicated on some machines

Pull apparmor fixes from James Morris:
 "A couple more regressions fixed"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix bad lock balance when introspecting policy
  apparmor: fix memleak of the profile hash

Merge tag 'iio-fixes-for-3.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

Third set of IIO fixes for the 3.12 cycle.

Two little ones this time:

1) A missing clk_unprepare in adf4350.
2) A missing free of the active_scan_mask when iio_disable_all_buffers is
called during an unexpected device removal.  This leak was introduced by
the fix
a87c82e4 iio: Stop sampling when the device is removed
and hence is a regression fix.

Commit 3fa4d734 (usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv)
changed the conditional around the declaration of usb_nop_xceiv_register
from
	#if defined(CONFIG_NOP_USB_XCEIV) ||
		(defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
to
	#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)

While that looks the same, it is semantically different. The first expression
is true if CONFIG_NOP_USB_XCEIV is built as module and if the including
code is built as module. The second expression is true if code depending on
CONFIG_NOP_USB_XCEIV if built as module or into the kernel.

As a result, the arm:allmodconfig build fails with

arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init':
arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to
	`usb_nop_xceiv_register'

Fix the problem by reverting to the old conditional.

Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 90d33f3e as it's not
the correct fix for this issue, and it causes a build warning to be
added to the kernel tree.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Two functions defined in device_pm.c, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), have no callers and may be
dropped, so drop them.

Moreover, they are the only functions adding entries to and removing
entries from the power_dependent list in struct acpi_device, so drop
that list too.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Previously, we wanted SCSI devices corrsponding to ATA devices to
be runtime resumed when the power resource for those ATA device was
turned on by some other device, so we added the SCSI device to the
dependent device list of the ATA device's ACPI node.  However, this
code has no effect after commit 41863fce (ACPI / power: Drop automaitc
resume of power resource dependent devices) and the mechanism it was
supposed to implement is regarded as a bad idea now, so drop it.

[rjw: Changelog]
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>