Check return value of poll call and if it fails print error
to the system log. If errno is EINVAL then exit with non-zero
value otherwise continue the while loop and call poll again.
Signed-off-by: NTomas Hozza <thozza@redhat.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Check return value of setsockopt call and if it fails print error
to the system log and exit with non-zero value.
Signed-off-by: NTomas Hozza <thozza@redhat.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In preparation for supporting synthetic Fiber Channel device, add the GUID for
this service.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with Win8, the host supports multiple sub-channels for a given
device. As in the past, the initial channel offer specifies the device and
is associated with both the type and the instance GUIDs. For performance
critical devices, the host may support multiple sub-channels. The sub-channels
share the same type and instance GUID as the primary channel. The number of
sub-channels offerrred to the guest depends on the number of virtual CPUs
assigned to the guest. The guest can request the creation of these sub-channels
and once created and opened, the guest can distribute the traffic across all
the channels (the primary and the sub-channels). A request sent on a sub-channel
will have the response delivered on the same sub-channel.

At channel (sub-channel) creation we bind the channel interrupt to a CPU and
with this sub-channel support we will be able to spread the interrupt load
of a given device across all available CPUs.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch allows the 1-wire bus to autoload the corresponding module
for each slave being attached.
This works similar to bluetooth protocols.
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

strict_strtol is deprecated in favor of kstrtol.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the (*probe) function to the platform_driver and use the
module_platform_driver() macro to initialize the module.

Remove the unnecessary __init and __exit tags.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around readl(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around readl(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around readl(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a simple wrapper around writel(), remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These are simple wrappers around writel() and readl(). Remove them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The mmio_base is an ioremap'ed memory resource. The normal memory
io functions should be used not the __raw_* versions.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use managed device resources to clean up the probe/remove.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRyan Mallon <rmallon@gmail.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use devm_kzalloc to make cleanup paths simpler
Signed-off-by: NNikolay Balandin <nbalandin@dev.rtsoft.ru>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use devm_kzalloc to make cleanup paths simpler
Signed-off-by: NNikolay Balandin <nbalandin@dev.rtsoft.ru>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

s/regsiter/register/

Use origin comment from the first driver version
which also explain the usage of XHI_MAX_RETRIES better.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove checkpatch warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one device on the platform
drop mei_pdev and the mutex
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mei read always has to be preceded by write but
'write write read read' scenario should work as well.
In this case the offset is not zero but new read should
be initiated
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

wd independence is deprecated, remove it.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the changes in here.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

do_smart_update_queue() is called when an operation (semop,
semctl(SETVAL), semctl(SETALL), ...) modified the array.  It must check
which of the sleeping tasks can proceed.

do_smart_update_queue() missed a few wakeups:
 - if a sleeping complex op was completed, then all per-semaphore queues
   must be scanned - not only those that were modified by *sops
 - if a sleeping simple op proceeded, then the global queue must be
   scanned again

And:
 - the test for "|sops == NULL) before scanning the global queue is not
   required: If the global queue is empty, then it doesn't need to be
   scanned - regardless of the reason for calling do_smart_update_queue()

The patch is not optimized, i.e.  even completing a wait-for-zero
operation causes a rescan.  This is done to keep the patch as simple as
possible.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Acked-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Trond Myklebust:

 - Stable fix to prevent an rpc_task wakeup race
 - Fix a NFSv4.1 session drain deadlock
 - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd
 - Ensure auth_gss pipe detection works in namespaces
 - Fix SETCLIENTID fallback if rpcsec_gss is not available

* tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix SETCLIENTID fallback if GSS is not available
  SUNRPC: Prevent an rpc_task wakeup race
  NFSv4.1 Fix a pNFS session draining deadlock
  SUNRPC: Convert auth_gss pipe detection to work in namespaces
  SUNRPC: Faster detection if gssd is actually running
  SUNRPC: Fix a bug in gss_create_upcall

Pull amd64 edac fix from Borislav Petkov:
 "A sysfs file permissions correction"

* tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix bogus sysfs file permissions

Pull parisc fixes from Helge Deller:
 "This time we made the kernel- and interruption stack allocation
  reentrant which fixed some strange kernel crashes (specifically
  protection ID traps).

  Furthemore this patchset fixes the interrupt stack in UP and SMP
  configurations by using native locking instructions.  And finally
  usage of floating point calculations on parisc were disabled in the
  MPILIB."

* 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix irq stack on UP and SMP
  parisc/superio: Use module_pci_driver to register driver
  parisc: make interrupt and interruption stack allocation reentrant
  parisc: show number of FPE and unaligned access handler calls in /proc/interrupts
  parisc: add additional parisc git tree to MAINTAINERS file
  parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S
  parisc: add rp5470 entry to machine database
  MPILIB: disable usage of floating point registers on parisc

Pull xfs fixes from Ben Myers:
 "Here are fixes for corruption on 512 byte filesystems, a rounding
  error, a use-after-free, some flags to fix lockdep reports, and
  several fixes related to CRCs.  We have a somewhat larger post -rc1
  queue than usual due to fixes related to the CRC feature we merged for
  3.10:

   - Fix for corruption with FSX on 512 byte blocksize filesystems
   - Fix rounding error in xfs_free_file_space
   - Fix use-after-free with extent free intents
   - Add several missing KM_NOFS flags to fix lockdep reports
   - Several fixes for CRC related code"

* tag 'for-linus-v3.10-rc3' of git://oss.sgi.com/xfs/xfs:
  xfs: remote attribute lookups require the value length
  xfs: xfs_attr_shortform_allfit() does not handle attr3 format.
  xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC
  xfs: fix missing KM_NOFS tags to keep lockdep happy
  xfs: Don't reference the EFI after it is freed
  xfs: fix rounding in xfs_free_file_space
  xfs: fix sub-page blocksize data integrity writes

Pull bettery fixes from Anton Vorontsov:
 "Last minute one-liners: wrong kfree usage fix, module alias fixup and
  kconfig adjustments"

* tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6:
  pm2301_charger: Fix module alias prefix
  wm831x_backup: Fix wrong kfree call for devdata->backup.name
  bq27x00: Fix I2C dependency in KConfig
  lp8788-charger: Fix kconfig dependency

Pull power management and ACPI fixes from Rafael Wysocki:

 - Additional CPU ID for the intel_pstate driver from Dirk Brandewie.

 - More cpufreq fixes related to ARM big.LITTLE support and locking from
   Viresh Kumar.

 - VIA C7 cpufreq build fix from Rafał Bilski.

 - ACPI power management fix making it possible to use device power
   states regardless of the CONFIG_PM setting from Rafael J Wysocki.

 - New ACPI video blacklist item from Bastian Triller.

* tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist
  cpufreq: arm_big_little_dt: Instantiate as platform_driver
  cpufreq: arm_big_little_dt: Register driver only if DT has valid data
  cpufreq / e_powersaver: Fix linker error when ACPI processor is a module
  cpufreq / intel_pstate: Add additional supported CPU ID
  cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT
  ACPI / PM: Allow device power states to be used for CONFIG_PM unset

Pull slave-dma fixes from Vinod Koul:
 "We have two patches from Andy & Rafael fixing the Lynxpoint dma"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  ACPI / LPSS: register clock device for Lynxpoint DMA properly
  dma: acpi-dma: parse CSRT to extract additional resources

kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across
the tree. Noticed while grepping the tree for some other kcore stuff.

(score looks pretty unmaintained to me.)
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARC fixes from Vineet Gupta:

 - Fallouts/wreckage of Cache Flush optimizations / aliasing dcache
   support

 - Fix for an interesting bug where piped input to grep was getting
   mysteriously clobbered

* tag 'arc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: lazy dcache flush broke gdb in non-aliasing configs
  ARC: Use enough bits for determining page's cache color
  ARC: Brown paper bag bug in macro for checking cache color
  ARC: copy_(to|from)_user() to honor usermode-access permissions
  ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach()
  ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism

Pull ARM fixes from Russell King:
 "Just three this time, all really quite small"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported
  ARM: 7727/1: remove the .vm_mm value from gate_vma
  ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling