Allow the user set the MTU up to 65536 for Linux guests running on
Hyper-V 2008 R2 or later.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Automatically negotiate the highest protocol version mutually recognized by
both host and guest.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

__get_free_pages() doesn't return HI memory, so the memory is always mapped.
kmap_atomic() is not necessary here. This patch removes the kmap_atomic()
calls and related code for locking and page manipulation.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert rtllib from registering the crypt drivers against rtllib_crypt
and instead register the against lib80211. The crypto functions have
R- prepended (R-CCMP, R-TKIP, R-WEP) so they will not clash with the
lib80211 versions.

We cannot use the lib80211 crypt drivers since the rtl8192e has some
hardware support that is not handled by the lib80211 crypt drivers.
Signed-off-by: NSean MacLennan <seanm@seanm.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert rtllib to use lib80211_crypt_info.
Signed-off-by: NSean MacLennan <seanm@seanm.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert rtllib_crypt_data to lib80211_crypt_data and
rtllib_crypt_ops to lib80211_crypt_ops.

This is almost a 1:1 replacement, only extra_prefix_len and
extra_postfix_len changed.
Signed-off-by: NSean MacLennan <seanm@seanm.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add lib80211.h header file to rtllib.h and get it compiling.
Signed-off-by: NSean MacLennan <seanm@seanm.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

add mei_watchdog_register/unregister wrappers for
cleaner  encapsulation
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Uncached/writecombine buffers need to be clean before creating uc/wc
userspace mappings, lest dirty cache lines fall down and corrupt the
contents of the buffer.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the int return of function INTnsProcessData, because
nobody uses this return.
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed remnants of old function definitions which have since been
removed in earlier cleanup work.
Signed-off-by: NBart Westgeest <bart@elbrys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usbip_xmit function supported sending and receiving data, however
the sending part of the function was never used/executed. Renamed the
function to usbip_recv, and removed the unused code.
Signed-off-by: NBart Westgeest <bart@elbrys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These callbacks are currently used by the individual buffer implementations to
ensure that the request_update callback is not issued while the buffer is in use.
But the core already provides sufficient measures to prevent this from happening
in the first place. So it is safe to remove them.

There is one functional change due to this patch. Since the buffer is no longer
marked as in use when the chrdev is opened, it is now possible to enable the
buffer while it is opened. This did not work before, because mark_param_change
did fail if the buffer was marked as in use.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Right now we have a mark_param_change callback in the buffer access
functions struct, which should be called whenever the parameters (length,
bytes per datum) of the buffer change. But it is only called when the user
changes the buffer size, not when the bytes per datum change. Additionally each
buffer implementation already keeps track internally whether its parameters
have changed, making the call to mark_param_change after changing the buffer
length redundant. Since each buffer implementation knows best when one of its
parameters has changed just make tracking of this internal and drop the
mark_param_change callback.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently none of the buffer implementations implements the enable() or
is_enable() nor does core code try to call these. So it is safe to remove them.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The flag is only cleared, never set or tested, so it is safe to remove it.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Our buffer implementation does not support multiple concurrent readers. So we
have to ensure that a device is only opened once at a time. So do the same thing
we do for the event fd and introduce a per device busy flag. The flag gets set
when opening the device and gets cleared when closing the device. If a open is
attempted while the busy flag is set we return -EBUSY.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The buffer buffer storage is only update when enabling the buffer. Changing the
buffer size while the buffer is enabled will confuse the buffer in regard to
its actual buffer size and can cause potential memory corruption. Thus it is
only safe to modify the buffer size when the buffer is disabled.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently we only disallow changing the scan elements, while the buffer is
enabled, in triggered buffer mode. This patch changes it to disallow it for all
buffered modes. Disabling or enabling scan elements while the buffer is enabled
will cause undefined behavior since the reader will not be able to tell samples
with the new and old scan element set apart and thus wont be able to extract
any meaningful data from the buffer.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the return of the function CARDbSetMediaChannel, that
always return TRUE value.
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This function always return TRUE, and it is not used by the funtions
who calls it.
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes the following warning:
	drivers/staging/iio/industrialio-buffer.c: In function ‘iio_scan_mask_query’:
	drivers/staging/iio/industrialio-buffer.c:620: warning: unused variable ‘mask’
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes some 80 chatacters limit warnings in the lowmemorykiller.c file
Signed-off-by: NMarco Navarra <fromenglish@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a simple tab-space warning in binder.h found by checkpatch tool
Signed-off-by: NMarco Navarra <fromenglish@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

 gma_resume_display() wants 'struct pci_dev *' as it's parameter, so lets pass dev->pdev instead of dev. Fixes the following warning.

drivers/staging/gma500/power.c: In function ‘gma_power_begin’:
drivers/staging/gma500/power.c:269:3: warning: passing argument 1 of ‘gma_resume_display’ from incompatible pointer type
drivers/staging/gma500/power.c:99:13: note: expected ‘struct pci_dev *’ but argument is of type ‘struct drm_device *’
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Variable IoBuffer.InputLength is chosen from userspace,
and can therefore be less than the intended size. In this
case,the memory from the kmalloc call is eventually cast
to a PBULKWRM_BUFFER. If the IoBuffer.InputLength does not
meet the minimum size of PBULKWRM_BUFFER, then we will get
a kernel Oops. To resolve this issue, this patch verifies
IoBuffer.InputLength meets the minimum size before invoking
the kmalloc call.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This ioctl, IOCTL_BCM_GET_DRIVER_VERSION, is
responsible for sending the driver version
to userspace. However, the requested size stored
in IoBuffer.OutputLength may be incorrect.
Therefore, we altered the code to send the
exact length of the version, plus one for the
null character.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

LTTng has been removed from the staging tree. Complete this removal by
removing the LTTng entry from the MAINTAINERS file.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes checkpatch warnings with the ashmem.c file

CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The arguments to shrink functions have changed, update
ashmem_shrink to match.
Signed-off-by: NColin Cross <ccross@android.com>
[jstultz: tweaked commit subject]
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBjorn Bringert <bringert@android.com>
[jstultz: tweaked commit subject]
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NColin Cross <ccross@google.com>
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NArve Hjønnevåg <arve@android.com>
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBjorn Bringert <bringert@android.com>
[jstultz: Tweaked commit subject]
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The anonymous shared memory (ashmem) subsystem provides a
Unix-y,file-based shared memory interface to user-space. It
works like anonymous memory (e.g. mmapping fd=0) except if
you share the file descriptor via the usual means, you will
share the mapping. The shared memory can be accessed via both
mmap or file I/O. The backing store is a simple shmem file.

Additionally, ashmem introduces the concept of page pinning.
Pinned pages (the default) behave like any anonymous memory.
Unpinned pages are available to the kernel for eviction during
VM pressure. When repinning the pages, the return value
instructs user-space as to any eviction. In this manner,
user-space processes may implement caching and similar
resource management that efficiently integrates with kernel
memory management.
Signed-off-by: NRobert Love <rlove@google.com>

ashmem: Don't install fault handler for private mmaps.

Ashmem is used to create named private heaps. If this heap is backed
by a tmpfs file it will allocate two pages for every page touched.
In 2.6.27, the extra page would later be freed, but 2.6.29 does not
scan anonymous pages when running without swap so the memory is not
freed while the file is referenced. This change changes the behavior
of private ashmem mmaps to match /dev/zero instead tmpfs.
Signed-off-by: NArve Hjønnevåg <arve@android.com>

ashmem: Add common prefix to name reported in /proc/pid/maps
Signed-off-by: NArve Hjønnevåg <arve@android.com>

ashmem: don't require a page aligned size

This makes ashmem more similar to shmem and mmap, by
not requiring the specified size to be page aligned,
instead rounding it internally as needed.
Signed-off-by: NMarco Nelissen <marcone@android.com>
[jstultz: Improved commit subject and included patch description
from rlove. Also moved ashmem files to staging dir, and reworked
code to avoid touching mm/shmem.c while we're in staging.]
CC: Brian Swetland <swetland@google.com>
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Dima Zavin <dima@android.com>
CC: Robert Love <rlove@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the Android pmem driver to the staging tree.

[At this point in time, it is dependent on the ARM platform, due to some
build issues that require it. - gregkh]
Signed-off-by: NRebecca Schultz <rschultz@google.com>
Signed-off-by: NRebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NJamie Gennis <jgennis@google.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes a number of minor space issues in the Android switch code.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the Android switch driver code to the staging tree.

[Note, this code was located in drivers/switch/ in the Android kernel
releases, but as that api wasn't generally accepted, and the interface
is working toward changing to the newly proposed extcon inteface, this
driver was placed here until the extcon code is merged into mainline and
the Android userspace code is converted over to using it. - gregkh]
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NMike Lockwood <lockwood@android.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: MyungJoo Ham <myungjoo.ham@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Morten CHRISTIANSEN <morten.christiansen@stericsson.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Right now just a tiler_map file to dump a 2d map of which areas in
tiler/dmm have pinned buffers (or reservations).  In the future more
could be added.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>