Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The struct device_node currently has a _flags variable, although
it's only used for one flag - OF_DYNAMIC.  Generalise the flag
accessors so we can use them with other flags in future.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On Power machines supporting VRMA, Kexec/Kdump does not work.
VRMA (virtual real-mode area) means that accesses with IR/DR = 0
(i.e. the MMU "off") actually still go through the hash table,
using entries put there by the hypervisor.

This means that when we clear out the hash table on kexec, we need to
make sure these entries are left untouched.

This also adds plpar_pte_read_raw() on the lines of
plpar_pte_remove_raw().

Signed-off-by : Sachin Sant <sachinp@in.ibm.com>
Signed-off-by : Mohan Kumar M <mohan@in.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In some of the PPC970 based systems, interrupt would be distributed to
offline cpus also even when booted with "maxcpus=1".  So check whether
cpu online map and cpu present map are equal or not.  If they are equal
default_distrib_server is used as interrupt server otherwise boot cpu
(default_server) used as interrupt server.

In addition to this, if an interrupt is assigned to a specific cpu (ie
smp affinity) and if that cpu is not online, the earlier code used to
return the default_distrib_server as interrupt server.  This
introduces an additional parameter to the get_irq function, called
strict_check.  Based on this parameter, if the cpu is not online
either default_distrib_server or -1 is returned.
Signed-off-by: NMohan Kumar M <mohan@in.ibm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Acked-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A Power6 can give up CPU cycles on a dedicated CPU (as opposed to a
shared CPU) to other shared processors if the administrator asks for it
(via the HMC).

This enables that to work properly on P6.

This just involves setting a bit in the CAS structure as well as the
VPA.  To donate cycles, a CPU has to have all SMT threads idle and
have the donate bit set in the VPA.  Then call H_CEDE.

The reason why shared processors just aren't used is because dedicated
CPUs are guaranteed an actual processor, yet the system is still able to
increase the capacity of the shared CPU pool.

Also rename the VPA's cpuctls_task_attrs field to a more accurate name.
Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This rewrites pretty much from scratch the handling of MMIO and PIO
space allocations on powerpc64.  The main goals are:

 - Get rid of imalloc and use more common code where possible
 - Simplify the current mess so that PIO space is allocated and
   mapped in a single place for PCI bridges
 - Handle allocation constraints of PIO for all bridges including
   hot plugged ones within the 2GB space reserved for IO ports,
   so that devices on hotplugged busses will now work with drivers
   that assume IO ports fit in an int.
 - Cleanup and separate tracking of the ISA space in the reserved
   low 64K of IO space. No ISA -> Nothing mapped there.

I booted a cell blade with IDE on PIO and MMIO and a dual G5 so
far, that's it :-)

With this patch, all allocations are done using the code in
mm/vmalloc.c, though we use the low level __get_vm_area with
explicit start/stop constraints in order to manage separate
areas for vmalloc/vmap, ioremap, and PCI IOs.

This greatly simplifies a lot of things, as you can see in the
diffstat of that patch :-)

A new pair of functions pcibios_map/unmap_io_space() now replace
all of the previous code that used to manipulate PCI IOs space.
The allocation is done at mapping time, which is now called from
scan_phb's, just before the devices are probed (instead of after,
which is by itself a bug fix). The only other caller is the PCI
hotplug code for hot adding PCI-PCI bridges (slots).

imalloc is gone, as is the "sub-allocation" thing, but I do beleive
that hotplug should still work in the sense that the space allocation
is always done by the PHB, but if you unmap a child bus of this PHB
(which seems to be possible), then the code should properly tear
down all the HPTE mappings for that area of the PHB allocated IO space.

I now always reserve the first 64K of IO space for the bridge with
the ISA bus on it. I have moved the code for tracking ISA in a separate
file which should also make it smarter if we ever are capable of
hot unplugging or re-plugging an ISA bridge.

This should have a side effect on platforms like powermac where VGA IOs
will no longer work. This is done on purpose though as they would have
worked semi-randomly before. The idea at this point is to isolate drivers
that might need to access those and fix them by providing a proper
function to obtain an offset to the legacy IOs of a given bus.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Twiddle the copyright notices. Per current guidelines, the use
of the (C) or (c) in source code is deprecated.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c        |    6 +++++-
 arch/powerpc/platforms/pseries/eeh_cache.c  |    3 ++-
 arch/powerpc/platforms/pseries/eeh_driver.c |    6 +++---
 3 files changed, 10 insertions(+), 5 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove some dead code.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Track and report the number of times we read an all-1s value (0xff,
0xffff or 0xffffffff) from each device which is valid data, not
indicating EEH isolation.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c       |    5 +++++
 arch/powerpc/platforms/pseries/eeh_sysfs.c |    3 +++
 include/asm-powerpc/pci-bridge.h           |    1 +
 3 files changed, 9 insertions(+)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add sysfs blinkenlights for EEH statistics.  Shuffle the
eeh_add_device_tree() call so that it appears in the correct
sequence.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/Makefile    |    2
 arch/powerpc/platforms/pseries/eeh.c       |    4 +
 arch/powerpc/platforms/pseries/eeh_cache.c |    2
 arch/powerpc/platforms/pseries/eeh_sysfs.c |   84 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/pci_dlpar.c |    7 +-
 include/asm-powerpc/ppc-pci.h              |    3 +
 6 files changed, 98 insertions(+), 4 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In 616883df request_irq was marked as
__must_check so we must... er... check it.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/platforms/pseries/pseries.h:24: warning: return type defaults to 'int'
arch/powerpc/platforms/pseries/pseries.h:25: warning: return type defaults to 'int'
arch/powerpc/platforms/pseries/pseries.h:24: warning: control reaches end of non-void function
arch/powerpc/platforms/pseries/pseries.h:25: warning: control reaches end of non-void function
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit 2f4dfe20 moved the definition
of hard_smp_processor_id() for the UP case from include/linux/smp.h
to include/asm/smp.h.  However, include/linux/smp.h only includes
include/asm/smp.h in the SMP case, so code that wants to use
hard_smp_processor_id() has to include <asm/smp.h> explicitly to
be sure of getting the definition.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

pci is not initialized before being used here, so this debug print is
bogus at the current location.  Move it to where it makes sense.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Assorted minor cleanups to EEH code; -- use literals, use
kerneldoc format.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c        |   13 ++++++++++---
 arch/powerpc/platforms/pseries/eeh_driver.c |    7 ++++---
 include/asm-powerpc/ppc-pci.h               |   18 +++++++++++++++---
 3 files changed, 29 insertions(+), 9 deletions(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When an EEH event is detected, and after the device driver
has been notified, but before the device is reset, enable
MMIO to the adapter, and grab the contents of the PCI status
and command registers, the PCI-X status and command, and the
PCI-E capability 10 and AER registers. Pass these up to the
RTAS error log, and also printk them.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If an EEH event is observed, capture PCI config space info about
the device, wrap it up and pass it to the event logger.  This
pach just slots in the basic logging function. A later patch
will provide for more through data gathering.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make some minor adjustments to the EEH error messages.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It turns out many/most versions of firmware enable MMIO when
the slto-error-detail rtas call is made (in violation of the
architecture). Thus, it would be best to call slot-error-detail
only after notifying device drivers of a freeze, as otherwise,
a variety of strange and unexpected things may happen.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Implement MSI support via RTAS (RTAS = run-time firmware on pSeries
machines).  For now we assumes that if the required RTAS tokens for
MSI are present, then we want to use the RTAS MSI routines.

When RTAS is managing MSIs for us, it will/may enable MSI on devices that
support it by default. This is contrary to the Linux model where a device
is in LSI mode until the driver requests MSIs.

To remedy this we add a pci_irq_fixup call, which disables MSI if they've
been assigned by firmware and the device also supports LSI. Devices that
don't support LSI at all will be left as is, drivers are still expected
to call pci_enable_msi() before using the device.

At the moment there is no pci_irq_fixup on pSeries, so we can just set it
unconditionally. If other platforms use the RTAS MSI backend they'll need
to check that still holds.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Adds the pSeries platform implementation for a new PCI API
which can be used to issue various types of PCI-E reset,
including PCI-E warm reset and PCI-E hot reset. This is needed
for an ipr PCI-E adapter which does not properly implement BIST.
Running BIST on this adapter results in PCI-E errors. The only
reliable reset mechanism that exists on this hardware is PCI
Fundamental reset (warm reset).
Acked-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The pseries PCI hotplug code cannot build as a module, unless
the pcibios_remove_pci_devices function is exported.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
----
 arch/powerpc/platforms/pseries/pci_dlpar.c |    1 +
 1 file changed, 1 insertion(+)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some versions of pSeries firmware fail to set up a
dma-window property for PCI slots that are unoccupied.
As a result, the loop searching for this propery, in
pci_dma_dev_setup_pSeriesLP(), can run to the end, resulting
in a NULL pointer dereference later in the routine. This
patch prevents the crash, and prints a warning message.

This is theoretically a rare error, as it occurs on what
is hopefully just beta levels of firmware. But just in case
this firmware escapes into the wild, this patch will avoid
the crash.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>

check_legacy_ioport makes only sense on PREP, CHRP and pSeries.
They may have an isa node with PS/2, parport, floppy and serial ports.

Remove the check_legacy_ioport call from ppc_md, it's not needed
anymore.  Hardware capabilities come from the device-tree.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This is more consistent and gets us closer to the Sparc code.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix link errors with CONFIG_EEH=n:

arch/powerpc/platforms/built-in.o: In function `.pcibios_fixup_new_pci_devices':
(.text+0x41c8): undefined reference to `.eeh_add_device_tree_late'
arch/powerpc/platforms/built-in.o: In function `.init_phb_dynamic':
(.text+0x4280): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pcibios_remove_pci_devices':
(.text+0x42fc): undefined reference to `.eeh_remove_bus_device'
arch/powerpc/platforms/built-in.o: In function `.pcibios_add_pci_devices':
(.text+0x43c0): undefined reference to `.eeh_add_device_tree_early'
arch/powerpc/platforms/built-in.o: In function `.pSeries_final_fixup':
(.init.text+0xb4): undefined reference to `.pci_addr_cache_build'
make[1]: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Moved pseries, iseries, chrp, prep, maple and pasemi into their respective
arch/powerpc/platform/*/Kconfig files out of arch/powerpc/Kconfig
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Rework how multi-function PCI devices are identified and traversed.
This fixes a bug with multi-function recovery on Power4 that was
introduced by a recent Power4 EEH patch.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

After requesting a state change, verify that the state change
actually ocurred, and the system ends up in the expected state.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The EEH event notification system passes around data that is
not needed or at least, not used properly. Stop passing this
data; get it in a more reliable fashion.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Modify routine that returns PCI slot status to wait for slot status
to become available. This is needed, as slots that are in some remote
card cage may go offline for extended periods of time. New users for
this routine in following patches.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some firmware versions will return a slot reset state of "1"
when a slot is EEH frozen. Recognize this as a state that can be
handled.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If the second or higher function of a multi-function device fails
to recover, this failure is not reported upwards. Fix this.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If a device driver does not have native PCI error recovery,
a hotplug error recovery will be attemped. In this case,
the device driver will not report back whether its healthy
or not; simply assume that it is.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Provide support for the new ibm,get-config-addr-info2 RTAS token,
whenever it is actually available.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some drivers will attempt to perform a lot of mmio even after
an EEH event was detected. This is especially the case for fast cpu's
and PCI-E slots. Be a bit more lenient in allowing this.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>