- 23 9月, 2015 10 次提交
-
-
由 Ville Syrjälä 提交于
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
I only tested this on BDW and SKL, but since the register description is the same ever since gen4, let's assume that all gens take the same register format. If that's not true, then hopefully someone will bisect a bug to this patch and we'll fix it. Notice that the wrong fence offset register just means that the hardware tracking will be wrong. Testcases: - igt/kms_frontbuffer_tracking/fbc-1p-primscrn-pri-shrfb-draw-mmap-gtt - igt/kms_frontbuffer_tracking/fbc-2p-primscrn-pri-shrfb-draw-mmap-gtt v2: - Add intel_crtc->adjusted_{x,y} so this code can work independently of intel_gen4_compute_page_offset(). (Ville). - This version also works on SKL. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
This commit is essentially a rewrite of "drm/i915: Check pixel format for fbc" from Ville Syrjälä. The idea is the same, but the code is different due to all the changes that happened since his original patch. So any bugs are due to my bad rewrite. v2: - Drop the alpha formats (Ville). v3: - Drop the stale comment (Ville). Testcases: igt/kms_frontbuffer_tracking/*fbc*-${format_name}-draw-* Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
This WA is only for HSW/BDW. Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
The spec says the register should have that value for the entire time that FBC is enabled, so apply the WA before we enable FBC. Notice that we also have this WA for ILK/SNB, but it is implemented at init_clock_gating(). I could move the IVB/HSW/BDW WA code to init_clock_gating() too, but since we recently had some complaints about WAs not staying after being set, I'm going to play safe and keep this here for now. Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
BSpec says we shouldn't enable FBC on HSW/BDW when the pipe pixel rate exceeds 95% of the core display clock. v2: - HSW also needs the WA (Ville). - Add the WA name (Ville). - Use the current cdclk (Ville). Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
And also print the threshold. I was surprised to see a log message claiming the CFB size was 32mb when there was less than 24mb available for it. Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
The FBC hardware for these platforms doesn't have access to the bios_reserved range, so it always assumes the maximum (8mb) is used. So avoid this range while allocating. This solves a bunch of FIFO underruns that happen if you end up putting the CFB in that memory range. On my machine, with 32mb of stolen, I need a 2560x1440 mode for that. Testcase: igt/kms_frontbuffer_tracking/fbc-* (given the right setup) Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Don't allow FBC for cases where the spec says we can't FBC. v2: - Just WARN_ON() the strides that should have been caught earlier (Daniel) - Make it a new function since I expect this to grow more. v3: - Document which IGT test is exercised by this. v4: - Implement the restrictions for gens 2-6 too (Ville). - Fix off-by-one mistake (Ville). Testcase: igt/kms_frontbuffer_tracking/fbc-badstride Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Always update the currrent crtc, fb and vertical offset after calling enable_fbc. We were forgetting to do so along the failure paths when enabling fbc synchronously. Fix this with a new helper to enable_fbc() and update the state simultaneously. v2: Improve commit message (Chris). v3: Constify struct drm_framebuffer (Ville). Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 05 8月, 2015 1 次提交
-
-
由 Paulo Zanoni 提交于
Due to the way busy_bits was handled, we were not doing any flushes if we didn't previously get an invalidate. Since it's possible to get flushes without an invalidate first, remove the busy_bits early return. So now that we don't have the busy_bits guard anymore we'll need the origin check for the GTT tracking (we were not doing anything on GTT flushes due to the GTT check at invalidate()). As a last detail, since we can get multiple consecutive flushes, disable FBC before updating it, otherwise intel_fbc_update() will just keep FBC enabled instead of restarting it. Notice that this does not fix any of the current IGT tests due to the fact that we still have a few intel_fbc() calls at points where we also have the frontbuffer tracking calls: we didn't fully convert to frontbuffer tracking yet. Once we remove those calls and start relying only on the frontbuffer tracking infrastructure we'll need this patch. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 7月, 2015 6 次提交
-
-
由 Paulo Zanoni 提交于
So now all the calls are inside __intel_fbc_update(). Consistency! Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
I have two separate refactor ideas that require extracting this to a separate function. I'm not sure which idea I'll end choosing, but since both will require extracting this function, let's do this now. Notice that this is just code moving. Any possible problems with the current multiple pipes check should be fixed in later commits. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
The poor in_dbg_master() check was the only one without a reason string. Give it a reason string so it won't feel excluded. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
This is all internal i915.ko work, let's start using intel_crtc for everything. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Because the cool kids use dev_priv and FBC wants to be cool too. We've been historically using struct drm_device on the FBC function arguments, but we only really need it for intel_vgpu_active(): we can use dev_priv everywhere else. So let's fully switch to dev_priv since I'm getting tired of adding "struct drm_device *dev = dev_priv->dev" everywhere. If I get a NACK here I'll propose the opposite: convert all the functions that currently take dev_priv to take dev. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Because it makes more sense there, IMHO. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 7月, 2015 4 次提交
-
-
由 Paulo Zanoni 提交于
Now all the functions called by other files check whether FBC has been initialized. This allows us to drop the checks on the static functions. v2: - s/HAS_FBC/dev_priv->display.enable_fbc/ everywhere but the init function (Chris). Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Everything is covered either by fbc.lock or mm.stolen_lock, and intel_fbc.c is already responsible for grabbing the appropriate locks when it needs them. Reviewed-by: NChris wilson <chris@chris-wilson.co.uk> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Make sure we're not going to have weird races in really weird cases where a lot of different CRTCs are doing rendering and modesets at the same time. With this change and the stolen_lock from the previous patch, we can start removing the struct_mutex locking we have around FBC in the next patches. v2: - Rebase (6 months later) - Also lock debugfs and stolen. v3: - Don't lock a single value read (Chris). - Replace lockdep assertions with WARNs (Daniel). - Improve commit message. - Don't forget intel_pre_plane_update() locking. v4: - Don't remove struct_mutex at intel_pre_plane_update() (Chris). - Add comment regarding locking dependencies (Chris). - Rebase after the stolen code rework. - Rebase again after drm-intel-nightly changes. v5: - Rebase after the new stolen_lock patch. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
With the abstractions created by the last patch, we can move this code and the only thing inside intel_fbc.c that knows about dev_priv->mm is the code that reads stolen_base. We also had to move a call to i915_gem_stolen_cleanup_compression() - now called intel_fbc_cleanup_cfb() - outside i915_gem_stolen.c. v2: - Rebase after the remove_node() changes on the previous patch. Requested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 7月, 2015 1 次提交
-
-
由 Paulo Zanoni 提交于
We first set the threshold value when we're allocating the CFB, and then later at {ilk,gen7}_fbc_enable() we increment it in case we're using 16bpp. While that is correct, it is dangerous: if we rework the code a little bit in a way that allows us to call intel_fbc_enable() without necessarily calling i915_gem_stolen_setup_compression() first, we might end up incrementing threshold more than once. To prevent that, increment a temporary variable instead. v2: Rebase. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 16 6月, 2015 3 次提交
-
-
由 Paulo Zanoni 提交于
This commit is just to make the intentions explicit: on HSW+ these bits are MBZ, but since we only support plane A and the macro evaluates to zero when plane A is the parameter, we're not fixing any bug. v2: - Remove useless extra blank like (Chris). - Init dpfc_ctl in another place (Chris). Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
This commit has two main advantages: simplify intel_fbc_update() and deduplicate the strings. v2: - Rebase due to changes on P1. - set_no_fbc_reason() can now return void (Chris). Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Because we're currently using FBC_UNSUPPORTED_MODE for two different cases. This commit will also allow us to write the next one without hiding information from the user. Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 5月, 2015 1 次提交
-
-
由 Maarten Lankhorst 提交于
This was an optimization from way back before we had primary plane support to be able to disable the primary plane. But with primary plane support userspace can tell the kernel this directly, so there's no big need for this any more. And it's getting in the way of the atomic conversion. If need be we can resurrect this later on properly again. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> [danvet: Explain why removing this is ok.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 26 3月, 2015 1 次提交
-
-
由 Rodrigo Vivi 提交于
This flag was being mostly used as a meta flag in some cases and not covering other cases. One of the risks is that it was masking some frontbuffer trackings without disabling PSR. So, better to kill this at once and avoid umbrella parameters. Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> [danvet: Drop unused out: label to appease gcc.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 18 3月, 2015 1 次提交
-
-
由 Paulo Zanoni 提交于
Kill the blt/render tracking we currently have and use the frontbuffer tracking infrastructure. Don't enable things by default yet. v2: (Rodrigo) Fix small conflict on rebase and typo at subject. v3: (Paulo) Rebase on RENDER_CS change. v4: (Paulo) Rebase. v5: (Paulo) Simplify: flushes don't have origin (Daniel). Also rebase due to patch order changes. Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 24 2月, 2015 3 次提交
-
-
由 Paulo Zanoni 提交于
So allow it. Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
So add code to consider this case. v2: Reorder the series, so drop the possible_framebuffer_bits chunk. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
I want to make this code a little more complicated, so let's extract the function first. Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 14 2月, 2015 5 次提交
-
-
由 Yu Zhang 提交于
Framebuffer compression is disabled when driver detects it's running in a Intel GVT-g enlightened VM, because FBC is not emulated and there is no stolen memory for a vGPU. v2: take Chris' comments: - move the code into intel_update_fbc() v4: take Tvrtko's comments: - rebase the code into intel_fbc_update() Signed-off-by: NYu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: NJike Song <jike.song@intel.com> Signed-off-by: NZhiyuan Lv <zhiyuan.lv@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
Since the mapping from CRTCs to planes is fixed, looking at the CRTC is essentially the same as looking at the plane. Also, the next patches wil start using the frontbuffer_bits macros, and they take the pipe as the parameter instead of the plane, and this could differ on gens 2 and 3. Another nice thing is that we don't risk accidentally initializing things to PLANE_A if we don't set the value before it is used for the first time. But this shouldn't be a problem with the current code. V2: Rebase. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
This may save a few picoseconds on !HAS_FBC platforms. And it also satisfies my OCD. Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Paulo Zanoni 提交于
.. because it would be a waste of time, so move the place where the check is done. Also, with this we won't risk printing "more than one pipe active, disabling compression" or "no output, disabling" when FBC is actually disabled. This patch also represents a small behavior difference when using i915.powersave=0: it is now exactly the same as i915.enable_fbc=0 on this part of the code. V2: Rebase. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
The check for previously reserved stolen space size for FBC in i915_gem_stolen_setup_compression() did not take the compression threshold into account. Fix this by storing and comparing to uncompressed size instead. The bug has been introduced in commit 5e59f717 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Jun 30 10:41:24 2014 -0700 drm/i915: Try harder to get FBC Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88975Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 27 1月, 2015 4 次提交
-
-
由 Matt Roper 提交于
Runtime state that can be manipulated via properties should now go in intel_plane_state/drm_plane_state so that it can be tracked as part of an atomic transaction. We add a new 'intel_create_plane_state' function so that the proper initial value for this property (and future properties) doesn't have to be repeated at each plane initialization site. v2: - Stick rotation in common drm_plane_state rather than intel_plane_state. (Daniel) - Add intel_create_plane_state() to consolidate the places where we have to set initial state values. (Ander) Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Mika Kuoppala 提交于
We have multiple forcewake domains now on recent gens. Change the function naming to reflect this. v2: More verbose names (Chris) v3: Rebase v4: Rebase v5: Add documentation for forcewake_get/put Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> (v2) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
And get rid of the duplicate mode structures. This patch was generated with the following semantic patch: @@ @@ struct intel_crtc_state { +struct drm_crtc_state base; + ... -struct drm_display_mode requested_mode; -struct drm_display_mode adjusted_mode; ... } @@ struct intel_crtc_state *state; @@ -state->adjusted_mode +state->base.adjusted_mode @@ struct intel_crtc_state *state; @@ -state->requested_mode +state->base.mode @@ struct intel_crtc_state state; @@ -state.adjusted_mode +state.base.adjusted_mode @@ struct intel_crtc_state state; @@ -state.requested_mode +state.base.mode @@ struct drm_crtc *crtc; @@ -to_intel_crtc(crtc)->config.adjusted_mode +to_intel_crtc(crtc)->config.base.adjusted_mode @@ identifier member; expression E; @@ -PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E); +PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E); @@ identifier member; @@ -PIPE_CONF_CHECK_I(adjusted_mode.member); +PIPE_CONF_CHECK_I(base.adjusted_mode.member); @@ identifier member; @@ -PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member); +PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member); v2: Completely generate the patch with cocci. (Ander) Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-