The 'master' parameter of the New CSRK event was recently renamed to
'type', with the old values kept for backwards compatibility as
unauthenticated local/remote keys. This patch updates the code to take
into account the two new (authenticated) values and ensures they get
used based on the security level of the connection that the respective
keys get distributed over.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that there's the general purpose hci_send_to_channel() API it will
do the exact same thing as queue_monitor_skb() when passed the monitor
HCI channel. This patch removes queue_monitor_skb() and replaces any
users of it with calls to hci_send_to_channel().
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The hci_send_to_control() can be made more general purpose with a small
change of passing the desired HCI channel as a parameter to it. This
allows using it for the monitor channel as well as e.g. 6lowpan in the
future.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The only reason the SMP code is essentially duplicating the
hci_copy_identity_addr() function is that the helper returns the address
type in the HCI format rather than the three-value format expected by
l2cap_chan. This patch converts the SMP code to use the helper and then
do a simple conversion from one address type to another.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Changing the HS setting requires that SSP is enabled, however so far the
code only checked for the SSP flag but not a potentially ongoing Set SSP
operation. This patch adds a check for a pending Set SSP command in the
Set HS handler, and returns a 'busy' error if one is found.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The command handler for Set HS doesn't use mgmt_pending_add() so we can
never have a pending Set HS command that mgmt_pending_find() would
return. This patch removes an unnecessary lookup for it in the set_ssp()
handler function.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch moves all the disconn_cfm callbacks to be based on the hci_cb
list. This means making l2cap_disconn_cfm private to l2cap_core.c and
sco_conn_cb private to sco.c respectively. Since the hci_conn type
filtering isn't done any more on the wrapper level the callbacks
themselves need to check that they were passed a relevant type of
connection.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch moves all the connect_cfm callbacks to be based on the hci_cb
list. This means making l2cap_connect_cfm private to l2cap_core.c and
sco_connect_cb private to sco.c respectively. Since the hci_conn type
filtering isn't done any more on the wrapper level the callbacks
themselves need to check that they were passed a relevant type of
connection.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's no reason to have the custom hci_proto_auth/encrypt_cfm helpers
when the hci_cb list works equally well. This patch adds L2CAP to the
hci_cb list and makes l2cap_security_cfm a private function of
l2cap_core.c.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We'll soon need to be able to sleep inside the loops that iterate the
hci_cb list, so neither a spinlock, rwlock or rcu are usable. This patch
changes the lock to a mutex which permits sleeping while holding the
lock.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When processing hci_cb entries we want first registered callbacks to be
called first and later ones later. This is because eventually the L2CAP
callbacks that are part of the core will use this list and get
registered first. To keep the same order of calling L2CAP callbacks
before e.g. RFCOMM the order of elements needs to be this way.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Some AMP controllers do not support the Read Local Features HCI commands
(even though according to the spec they should). Luckily they at least
correctly omit this from the supported commands bitmask, so we can work
around the issue by creating a second AMP init phase and issuing the HCI
command conditionally there.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

On BR/EDR the L2CAP channel instances for fixed channels have so far
been marked as ready only once the L2CAP information req/rsp procedure
is complete and we have the fixed channel mask. This could however lead
to data being dropped if we receive it on the channel before knowing the
remote mask.

Since it is valid for a remote to send data this early, simply assume
that the channel is supported when we receive data on it. So far this
hasn't been noticed much because of limited use of fixed channels on
BR/EDR, but e.g. with SMP over BR/EDR this is already now visible with
automated tests failing randomly.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Bluetooth controllers can export extensive information about
internal states via debugfs. This patch provides an option to
choose if these information are provided or not.

For backwards compatibility with existing kernel configuration,
this option defaults to yes.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The Broadcom firmware files are named with firmware version information
encoded into lmp_subver field. So BCM20702B0_002.001.014.0527.0607.hex
would be represented by 0x410e. To allow for an easier decoding of the
actual firmware names, provide an internal table that does the mapping
and request the firmware file by name.

Bluetooth: hci0: BCM20702B0 (002.001.014) build 0607

Now the complicated encoding of lmp_subver will be decoded and turned
into the name and firmware version information from the firmware files.

The previous attempt of using udev->product failed badly since it never
contains any matching entry to the actual hardware or firmware files
distributed by Broadcom in their Windows drivers. It is even worse since
it can change depending on if the internal bootstrapping happened before
the USB bus enumeration or after. This caused many race conditions.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The __next_ident function is a local function and so do not export it
and make it static.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The a2mp_send function is a local function and so do not export it
and make it static.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The amp_mgr_lookup_by_state function does not need to be exported. So
just move it to a different location and make it static.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

There is no reason to have amp_mgr_list and amp_mgr_list_lock exported
from a2mp.c and thus make both of them static.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The A2MP_FEAT_EXT declaration has a single user in a2mp.c and thus
just move it there.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so
that the device can load the ath3k firmware and re-enumerate itself as an
AR3011 device.

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04f2 ProdID=aff1 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: NAlexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org

This patch adds the device shutdown routine for Intel Bluetooth device.

Some platforms have BT LED issue with Intel Bluetooth device that BT LED goes
off 5 seconds after BT is turned off

For Intel Bluetooth device, the BT LED is turned off when:
- there is no active connection or radio activity
- USB is suspend

So, when the BT is turned off, it takes 5 seconds because USB suspend timeone
is 5 seconds by default. And if the USB suspend is not enabled, BT LED won't be
turned off.

To fix this issue, recently Intel Bluetooth firmware patch had been submitted
to turn off the BT LED immediately by the vendor specific command(0xFC3F). And
this patch sends this command to the device before closing the device.

For backward compatibility of this command  with old firmware, this command was
supported before, but it behaves same as HCI_RESET internally. So, it won't be
the problem even if the system doesn't have the latest firmware patch.
Signed-off-by: NTedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This callback allows a vendor to send the vendor specific commands
before cloing the hci interface.
Signed-off-by: NTedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

return type of wait_for_completion_timeout is unsigned long not int.
As rc is used here only for wait_for_completion_timeout the type is simply
changed to unsigned long.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds other known rfc6282 compression formats to the nhc
framework. These compression formats are known but not implemented yet.
For now this is useful to printout a warning which compression format
isn't supported.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: NStefan Schmidt <s.schmidt@samsung.com>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch move UDP header compression and uncompression into the
generic 6LoWPAN nhc header compression layer. Moreover this patch
activates the nhc layer compression in iphc compression and
uncompression functions.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: NStefan Schmidt <s.schmidt@samsung.com>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a generic next header compression layer interface. There
exists various methods to do a header compression after 6LoWPAN header
to save payload. This introduce a generic nhc header which allow a
simple adding of a new header compression format instead of a static
implementation inside the 6LoWPAN header compression and uncompression
function.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: NStefan Schmidt <s.schmidt@samsung.com>
Acked-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's now a proper wait_on_bit_timeout() API in linux/wait.h so we can
remove our own copy from btusb.c. Our copy had the task state and
timeout variables swapped so the patch also changes their order.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If user space is trying to pair on not enabled transport
MGMT_STATUS_REJECT will be returned.

If user space is trying to pair on transport which controller does not
support, MGMT_STATUS_NOT_SUPPORTED will be returned.

Having separate error code for that scenario might be useful for
debugging at least.
Signed-off-by: NLukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

With this patch -EOPNOTSUPP will be returned by hci_connect_acl for LE
only controllers. If it is dual device with disabled BREDR -ECONNREFUSED
will be returned
Signed-off-by: NLukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Kernel gives possibility to enable/disable LE host support.
There is flag HCI_LE_ENABLED which is set when this support is enabled
and some parts of the code checks this flag e.g. SMP
However it is still possible to make LE connection if LE Host support is
disabled, what might be confused for remote device.
This patch makes sure that kernel will not send HCI LE Create Connection
if LE HOST support is not enabled.
Signed-off-by: NLukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch cleanups the ieee802154_le64_to_be64 function. This patch
removes an unnecessary temporary variable.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch cleanups the ieee802154_be64_to_le64 function. This patch
removes an unnecessary temporary variable.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch corrects the ieee802154_is_valid_psdu_len function that this
function also checks on reserved values 6-8 for validation the psdu
length.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

6LoWPAN currently doesn't supports x-netns and works only in init_net.

With this patch, we ensure that:
 - the wpan interface cannot be moved to another netns;
 - the 6lowpan interface cannot be moved to another netns;
 - the wpan interface is in the same netns than the 6lowpan interface;
 - the 6lowpan interface is in init_net.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

A vendor specific command is sent to firmware during
initialization to enable this feature.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NCathy Luo <cluo@marvell.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

I pushed a version of the crypto iov_iter bug fix that
Al Viro wrote, but Linus put in a different copy of the
same fix into his tree.

I then reverted my commit in net-next, and that's why we have a merge
when pulling in Linus's tree.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 750d8065.

Linus already fixed this in his tree so just use what
he did.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge second set of updates from Andrew Morton:
 "More of MM"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
  mm/nommu.c: fix arithmetic overflow in __vm_enough_memory()
  mm/mmap.c: fix arithmetic overflow in __vm_enough_memory()
  vmstat: Reduce time interval to stat update on idle cpu
  mm/page_owner.c: remove unnecessary stack_trace field
  Documentation/filesystems/proc.txt: describe /proc/<pid>/map_files
  mm: incorporate read-only pages into transparent huge pages
  vmstat: do not use deferrable delayed work for vmstat_update
  mm: more aggressive page stealing for UNMOVABLE allocations
  mm: always steal split buddies in fallback allocations
  mm: when stealing freepages, also take pages created by splitting buddy page
  mincore: apply page table walker on do_mincore()
  mm: /proc/pid/clear_refs: avoid split_huge_page()
  mm: pagewalk: fix misbehavior of walk_page_range for vma(VM_PFNMAP)
  mempolicy: apply page table walker on queue_pages_range()
  arch/powerpc/mm/subpage-prot.c: use walk->vma and walk_page_vma()
  memcg: cleanup preparation for page table walk
  numa_maps: remove numa_maps->vma
  numa_maps: fix typo in gather_hugetbl_stats
  pagemap: use walk->vma instead of calling find_vma()
  clear_refs: remove clear_refs_private->vma and introduce clear_refs_test_walk()
  ...

Pull powerpc updates from Michael Ellerman:

 - Update of all defconfigs

 - Addition of a bunch of config options to modernise our defconfigs

 - Some PS3 updates from Geoff

 - Optimised memcmp for 64 bit from Anton

 - Fix for kprobes that allows 'perf probe' to work from Naveen

 - Several cxl updates from Ian & Ryan

 - Expanded support for the '24x7' PMU from Cody & Sukadev

 - Freescale updates from Scott:
    "Highlights include 8xx optimizations, some more work on datapath
     device tree content, e300 machine check support, t1040 corenet
     error reporting, and various cleanups and fixes"

* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
  cxl: Add missing return statement after handling AFU errror
  cxl: Fail AFU initialisation if an invalid configuration record is found
  cxl: Export optional AFU configuration record in sysfs
  powerpc/mm: Warn on flushing tlb page in kernel context
  powerpc/powernv: Add OPAL soft-poweroff routine
  powerpc/perf/hv-24x7: Document sysfs event description entries
  powerpc/perf/hv-gpci: add the remaining gpci requests
  powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
  powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
  perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
  perf: add PMU_EVENT_ATTR_STRING() helper
  perf: provide sysfs_show for struct perf_pmu_events_attr
  powerpc/kernel: Avoid initializing device-tree pointer twice
  powerpc: Remove old compile time disabled syscall tracing code
  powerpc/kernel: Make syscall_exit a local label
  cxl: Fix device_node reference counting
  powerpc/mm: bail out early when flushing TLB page
  powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  perf/powerpc: reset event hw state when adding it to the PMU
  powerpc/qe: Use strlcpy()
  ...