copy_to_user_auth() fails to initialize the remainder of alg_name and
therefore discloses up to 54 bytes of heap memory via netlink to
userland.

Use strncpy() instead of strcpy() to fill the trailing bytes of alg_name
with null bytes.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of the modes of Huawei E367 has this QMI/wwan interface:

 I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none)
 E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
 E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Huawei use subclass and protocol to identify vendor specific
functions, so adding a new vendor rule for this combination.

The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use
the same subclass to identify the QMI/wwan function.  Replace the
existing device specific UML290 entries with generic vendor matching,
adding support for the Pantech P4200.

The ZTE MF683 has 6 vendor specific interfaces, all using
ff/ff/ff for cls/sub/prot.  Adding a match on interface #5 which
is a QMI/wwan interface.

Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com>
Cc: Thomas Schäfer <tschaefer@t-online.de>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rcv_wscale is a symetric parameter with snd_wscale.

Both this parameters are set on a connection handshake.

Without this value a remote window size can not be interpreted correctly,
because a value from a packet should be shifted on rcv_wscale.

And one more thing is that wscale_ok should be set too.

This patch doesn't break a backward compatibility.
If someone uses it in a old scheme, a rcv window
will be restored with the same bug (rcv_wscale = 0).

v2: Save backward compatibility on big-endian system. Before
    the first two bytes were snd_wscale and the second two bytes were
    rcv_wscale. Now snd_wscale is opt_val & 0xFFFF and rcv_wscale >> 16.
    This approach is independent on byte ordering.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
CC: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It should be the skb which is not cloned
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSøren Holm <sgh@sgh.dk>
Cc: stable@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the old timestamps of a class, say cl, are stale when the class
becomes active, then QFQ may assign to cl a much higher start time
than the maximum value allowed. This may happen when QFQ assigns to
the start time of cl the finish time of a group whose classes are
characterized by a higher value of the ratio
max_class_pkt/weight_of_the_class with respect to that of
cl. Inserting a class with a too high start time into the bucket list
corrupts the data structure and may eventually lead to crashes.
This patch limits the maximum start time assigned to a class.
Signed-off-by: NPaolo Valente <paolo.valente@unimore.it>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If recv() syscall is called for a TCP socket so that
  - IOAT DMA is used
  - MSG_WAITALL flag is used
  - requested length is bigger than sk_rcvbuf
  - enough data has already arrived to bring rcv_wnd to zero
then when tcp_recvmsg() gets to calling sk_wait_data(), receive
window can be still zero while sk_async_wait_queue exhausts
enough space to keep it zero. As this queue isn't cleaned until
the tcp_service_net_dma() call, sk_wait_data() cannot receive
any data and blocks forever.

If zero receive window and non-empty sk_async_wait_queue is
detected before calling sk_wait_data(), process the queue first.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some architectures test_bit() can return other values than 0 or 1:

With a generic x86 OpenWrt image in a kvm setup (batadv_)test_bit()
frequently returns -1 for me, leading to batadv_iv_ogm_update_seqnos()
wrongly signaling a protected seqno window.

This patch tries to fix this issue by making batadv_test_bit() return 0
or 1 only.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Acked-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On PCI/PCI-X HW, if packet size is less than ETH_ZLEN,
packets may get corrupted during padding by HW.
To WA this issue, pad all small packets manually.
Signed-off-by: NTushar Dave <tushar.n.dave@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if xfrm_policy_get_afinfo returns 0, it has already released the read
lock, xfrm_policy_put_afinfo should not be called again.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephan Springl found that commit 1402d366 "tcp: introduce
tcp_try_coalesce" introduced a regression for rlogin

It turns out problem comes from TCP urgent data handling and
a change in behavior in input path.

rlogin sends two one-byte packets with URG ptr set, and when next data
frame is coalesced, we lack sk_data_ready() calls to wakeup consumer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NStephan Springl <springl-k@lar.bfw.de>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If orphan flags fails, we don't free the skb
on receive, which leaks the skb memory.

Return value was also wrong: netif_receive_skb
is supposed to return NET_RX_DROP, not ENOMEM.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a check if pdev->bus->self == NULL (root bus). When attaching
a netxen NIC to a VM it can be on the root bus and the guest would
crash in netxen_mask_aer_correctable() because of a NULL pointer
dereference if CONFIG_PCIEAER is present.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance
regression for IPv6. Rx checksum offload does not work. IPv6 packets
are passed to the stack with CHECKSUM_NONE.

The hardware obviously cannot perform IP checksum validation for IPv6,
because there is no checksum in the IPv6 header. This should not prevent
us from setting CHECKSUM_UNNECESSARY.

Tested on BCM57711.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dump_one_policy() returns an error, e.g. because of a too small
buffer to dump the whole xfrm policy, xfrm_policy_netlink() returns
NULL instead of an error pointer. But its caller expects an error
pointer and therefore continues to operate on a NULL skbuff.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dump_one_state() returns an error, e.g. because of a too small
buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL
instead of an error pointer. But its callers expect an error pointer
and therefore continue to operate on a NULL skbuff.

This could lead to a privilege escalation (execution of user code in
kernel context) if the attacker has CAP_NET_ADMIN and is able to map
address 0.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 dst should take care of rt_genid too. When a xfrm policy is inserted or
deleted, all dst should be invalidated.
To force the validation, dst entries should be created with ->obsolete set to
DST_OBSOLETE_FORCE_CHK. This was already the case for all functions calling
ip6_dst_alloc(), except for ip6_rt_copy().

As a consequence, we can remove the specific code in inet6_connection_sock.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a policy is inserted or deleted, all dst should be recalculated.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit prepares the use of rt_genid by both IPv4 and IPv6.
Initialization is left in IPv4 part.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We dont use jhash anymore since route cache removal,
so we can get rid of get_random_bytes() calls for rt_genid
changes.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since route cache deletion (89aef892), delay is no
more used. Remove it.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
This is a batch of fixes intended for the 3.6 stream.

Arend van Spriel sends a simple thinko fix to correct a constant,
preventing the setting of an invalid power level.

Colin Ian King gives us a simple allocation failure check to avoid a
NULL pointer dereference.

Felix Fietkau sends another ath9k tx power patch, this time disabling a
feature that has been reported to cause rx problems.

Hante Meuleman provides a pair of endian fixes for brcmfmac.

Larry Finger offers an rtlwifi fix that avoids a system lockup related
to loading the wrong firmware for RTL8188CE devices.

These have been in linux-next for a few days and I think they should be
included in the final 3.6 kernel if possible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull GFS2 fixes from Steven Whitehouse:
 "Here are three GFS2 fixes for the current kernel tree.  These are all
  related to the block reservation code which was added at the merge
  window.  That code will be getting an update at the forthcoming merge
  window too.  In the mean time though there are a few smaller issues
  which should be fixed.

  The first patch resolves an issue with write sizes of greater than 32
  bits with the size hinting code.  The second ensures that the
  allocation data structure is initialised when using xattrs and the
  third takes into account allocations which may have been made by other
  nodes which affect a reservation on the local node."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Take account of blockages when using reserved blocks
  GFS2: Fix missing allocation data for set/remove xattr
  GFS2: Make write size hinting code common

Pull x86 platform driver updates from Matthew Garrett:
 "A few small updates for 3.6 - a trivial regression fix and a couple of
  conformance updates for the gmux driver, plus some tiny fixes for
  asus-wmi, eeepc-laptop and thinkpad_acpi."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  thinkpad_acpi: buffer overflow in fan_get_status()
  eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug()
  platform/x86: fix asus_laptop.wled_type description
  asus-laptop: HRWS/HWRS typo
  drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO
  apple-gmux: Fix port address calculation in gmux_pio_write32()
  apple-gmux: Fix index read functions
  apple-gmux: Obtain version info from indexed gmux

Pull i2c embedded fixes from Wolfram Sang:
 "The last bunch of (typical) i2c-embedded driver fixes for 3.6.

  Also update the MAINTAINERS file to point to my tree since people keep
  asking where to find their patches."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: algo: pca: Fix mode selection for PCA9665
  MAINTAINERS: fix tree for current i2c-embedded development
  i2c: mxs: correctly setup speed for non devicetree
  i2c: pnx: Fix read transactions of >= 2 bytes
  i2c: pnx: Fix bit definitions

Merge tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:

 - Fixes a regression, introduced in 3.6-rc1, when a file is closed
   before its shared memory mapping is dirtied and unmapped.  The lower
   file was being released when the eCryptfs file was closed and the
   dirtied pages could not be written out.
 - Adds a call to the lower filesystem's ->flush() from
   ecryptfs_flush().
 - Fixes a regression, introduced in 2.6.39, when a file is renamed on
   top of another file.  The target file's inode was not being evicted
   and the space taken by the file was not reclaimed until eCryptfs was
   unmounted.

* tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Copy up attributes of the lower target inode after rename
  eCryptfs: Call lower ->flush() from ecryptfs_flush()
  eCryptfs: Write out all dirty pages just before releasing the lower file

Pull one more DMA-mapping fix from Marek Szyprowski:
 "This patch fixes very subtle bug (typical off-by-one error) which
  might appear in very rare circumstances."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: mm: fix DMA pool affiliation check

Pull hwmon fixes from Guenter Roeck:
 "Fix word size register read and write operations in ina2xx driver, and
  initialize uninitialized structure elements in twl4030-madc-hwmon
  driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina2xx) Fix word size register read and write operations
  hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements

Pull drm fixes from Dave Airlie:
 "I realise this a bit bigger than I would want at this point.

  Exynos is a large chunk, I got them to half what they wanted already,
  and hey its ARM based, so not going to hurt many people.

  Radeon has only two fixes, but the PLL fixes were a bit bigger, but
  required for a lot of scenarios, the fence fix is really urgent.

  vmwgfx: I've pulled in a dumb ioctl support patch that I was going to
  shove in later and cc stable, but we need it asap, its mainly to stop
  mesa growing a really ugly dependency in userspace to run stuff on
  vmware, and if I don't stick it in the kernel now, everyone will have
  to ship ugly userspace libs to workaround it.

  nouveau: single urgent fix found in F18 testing, causes X to not start
  properly when f18 plymouth is used

  i915: smattering of fixes and debug quieting

  gma500: single regression fix

  So as I said a bit large, but its fairly well scattered and its all
  stuff I'll be shipping in F18's 3.6 kernel."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau: fix booting with plymouth + dumb support
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file
  vmwgfx: add dumb ioctl support
  gma500: Fix regression on Oaktrail devices
  ...

Pull scheduler fixes from Ingo Molnar:
 "Smaller fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix kernel-doc warnings in kernel/sched/fair.c
  sched: Unthrottle rt runqueues in __disable_runtime()
  sched: Add missing call to calc_load_exit_idle()
  sched: Fix load avg vs cpu-hotplug

Pull perf fixes from Ingo Molnar:
 "This tree includes various fixes"

Ingo really needs to improve on the whole "explain git pull" part.
"Various fixes" indeed.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled
  perf/x86: Enable Intel Cedarview Atom suppport
  perf_event: Switch to internal refcount, fix race with close()
  oprofile, s390: Fix uninitialized memory access when writing to oprofilefs
  perf/x86: Fix microcode revision check for SNB-PEBS

Pull a core sparse warning fix from Ingo Molnar

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/memblock: Use NULL instead of 0 for pointers

Pull networking fixes from David Miller:

 1) Use after free and new device IDs in bluetooth from Andre Guedes,
    Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg.

 2) Fix crashes with short packet lengths and VLAN in pktgen, from
    Nishank Trivedi.

 3) mISDN calls flush_work_sync() with locks held, fix from Karsten
    Keil.

 4) Packet scheduler gred parameters are reported to userspace
    improperly scaled, and WRED idling is not performed correctly.  All
    from David Ward.

 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov.

 6) ibmveth device has RX queue alignment requirements which are not
    being explicitly met resulting in sporadic failures, fix from
    Santiago Leon.

 7) Netfilter needs to take care when interpreting sockets attached to
    socket buffers, they could be time-wait minisockets.  Fix from Eric
    Dumazet.

 8) sock_edemux() has the same issue as netfilter did in #7 above, fix
    from Eric Dumazet.

 9) Avoid infinite loops in CBQ scheduler with some configurations, from
    Eric Dumazet.

10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef
    Kadlecsik.

11) SCTP overcharges socket for TX packets, fix from Thomas Graf.

12) CODEL packet scheduler should not reset it's state every time it
    builds a new flow, fix from Eric Dumazet.

13) Fix memory leak in nl80211, from Wei Yongjun.

14) NETROM doesn't check skb_copy_datagram_iovec() return values, from
    Alan Cox.

15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN,
    oops.  From Eric Dumazet.

16) Fix selection of ath9k chips on which PA linearization and AM2PM
    predistoration are used, from Felix Fietkau.

17) Flow steering settings in mlx4 driver need to be validated properly,
    from Hadar Hen Zion.

18) bnx2x doesn't show the correct link duplex setting, from Yaniv
    Rosner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  pktgen: fix crash with vlan and packet size less than 46
  bnx2x: Add missing afex code
  bnx2x: fix registers dumped
  bnx2x: correct advertisement of pause capabilities
  bnx2x: display the correct duplex value
  bnx2x: prevent timeouts when using PFC
  bnx2x: fix stats copying logic
  bnx2x: Avoid sending multiple statistics queries
  net: qmi_wwan: call subdriver with control intf only
  net_sched: gred: actually perform idling in WRED mode
  net_sched: gred: fix qave reporting via netlink
  net_sched: gred: eliminate redundant DP prio comparisons
  net_sched: gred: correct comment about qavg calculation in RIO mode
  mISDN: Fix wrong usage of flush_work_sync while holding locks
  netfilter: log: Fix log-level processing
  net-sched: sch_cbq: avoid infinite loop
  net: qmi_wwan: fix Gobi device probing for un2430
  net: fix net/core/sock.c build error
  ixp4xx_hss: fix build failure due to missing linux/module.h inclusion
  caif: move the dereference below the NULL test
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here are a number of USB patches, a bit more than I normally like this
  late in the -rc series, but given people's vacations (myself
  included), and the kernel summit, it seems to have happened this way.

  All are tiny, but they add up.  A number of gadget and xhci fixes, and
  a few new device ids.  All have been tested in linux-next.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  usb: chipidea: cleanup dma_pool if udc_start() fails
  usb: chipidea: udc: fix error path in udc_start()
  usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  usb: chipidea: udc: fix setup of endpoint maxpacket size
  USB: option: replace ZTE K5006-Z entry with vendor class rule
  EHCI: Update qTD next pointer in QH overlay region during unlink
  USB: cdc-wdm: fix wdm_find_device* return value
  USB: ftdi_sio: do not claim CDC ACM function
  usb: dwc3: gadget: fix pending isoc handling
  usb: renesas_usbhs: fixup DMA transport data alignment
  usb: gadget: at91udc: Don't check for ep->ep.desc
  usb: gadget: at91udc: don't overwrite driver data
  usb: dwc3: core: fix incorrect usage of resource pointer
  usb: musb: musbhsdma: fix IRQ check
  usb: musb: tusb6010: fix error path in tusb_probe()
  usb: musb: host: fix for musb_start_urb Oops
  usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh
  usb: gadget: dummy_hcd: fixup error probe path
  usb: gadget: s3c-hsotg.c: fix error return code
  ...

Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 2 tiny patches for a serial driver to resolve issues that
  people have reported with the 3.6-rc tree.

  Both of these have been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: don't reinit clock in imx_setup_ufcr()
  tty: serial: imx: console write routing is unsafe on SMP

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are a few staging tree fixes for problems that have been
  reported.

  Nothing major, just a number of tiny driver fixes.  All of these have
  been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  drm/omap: add more new timings fields
  drm/omap: update for interlaced
  staging: r8712u: fix bug in r8712_recv_indicatepkt()
  staging: zcache: fix cleancache race condition with shrinker
  Staging: Android alarm: IOCTL command encoding fix
  staging: vt6656: [BUG] - Failed connection, incorrect endian.
  staging: ozwpan: fix memcmp() test in oz_set_active_pd()
  staging: wlan-ng: Fix problem with wrong arguments
  staging: comedi: das08: Correct AO output for das08jr-16-ao
  staging: comedi: das08: Correct AI encoding for das08jr-16-ao
  staging: comedi: das08: Fix PCI ref count
  staging: comedi: amplc_pci230: Fix PCI ref count
  staging: comedi: amplc_pc263: Fix PCI ref count
  staging: comedi: amplc_pc236: Fix PCI ref count
  staging: comedi: amplc_dio200: Fix PCI ref count
  staging: comedi: amplc_pci224: Fix PCI ref count
  drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR
  staging iio: fix potential memory leak in lis3l02dq_ring.c
  staging:iio: prevent divide by zero bugs

Pull driver core fix from Greg Kroah-Hartman:
 "Here is one fix for 3.6-rc6 for the kobject.h file.

  It fixes a reported oops if CONFIG_HOTPLUG is disabled.  It's been in
  the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"

We already use them for openat() and friends, but fstat() also wants to
be able to use O_PATH file descriptors.  This should make it more
directly comparable to the O_SEARCH of Solaris.

Note that you could already do the same thing with "fstatat()" and an
empty path, but just doing "fstat()" directly is simpler and faster, so
there is no reason not to just allow it directly.

See also commit 332a2e12, which did the same thing for fchdir, for
the same reasons.
Reported-by: Nольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org    # O_PATH introduced in 3.0+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After calling into the lower filesystem to do a rename, the lower target
inode's attributes were not copied up to the eCryptfs target inode. This
resulted in the eCryptfs target inode staying around, rather than being
evicted, because i_nlink was not updated for the eCryptfs inode. This
also meant that eCryptfs didn't do the final iput() on the lower target
inode so it stayed around, as well. This would result in a failure to
free up space occupied by the target file in the rename() operation.
Both target inodes would eventually be evicted when the eCryptfs
filesystem was unmounted.

This patch calls fsstack_copy_attr_all() after the lower filesystem
does its ->rename() so that important inode attributes, such as i_nlink,
are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called
and eCryptfs can drop its final reference on the lower inode.

http://launchpad.net/bugs/561129Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Tested-by: NColin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org> [2.6.39+]