- 29 8月, 2014 35 次提交
-
-
由 Sujith Manoharan 提交于
If a new context is being added in addition to the current one, then send the ASSIGN event to abort a running scan since the addition of a context is usually followed by VIF assignment and further operations. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
There is no reason why managed/p2p interfaces have to be limited to one. IBSS is the only type that needs a restriction. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This will be useful in handling addition/change of new channel contexts. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Move it inside a CONFIG_ATH9K_CHANNEL_CONTEXT ifdef since it is not needed otherwise. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This was introduced in an earlier patch to handle a compilation warning, but since the channel context code has been mostly isolated, this is not required now. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
chanctx_work and next_chan are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Finally move the 'offchannel' instance in ath_softc inside a CONFIG_ATH9K_CHANNEL_CONTEXT cage. The offchannel usage in ath9k_calculate_iter_data() is closed off with an ifdef for now, since the state/opmode calculation is common for both the channel context mode and the normal mode. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
ath9k_vif_iter() was earlier used as an iterator routine when calling a mac80211 utility. This is no longer the case and hence we can mention the argument type explicitly. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
ath_chanctx_check_active() is required only when channel contexts are used. Make sure that it is not called in normal usage. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Introduce a function that handles queues in channel context mode. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
These routines are required only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Setup the offchannel/sched timers and the chanctx work inside the new function. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This patch ensures that the module parameter "use_chanctx" is visible only when CONFIG_ATH9K_CHANNEL_CONTEXT is selected. Also register the channel context callbacks with mac80211 only when it is explicitly enabled and compile them out of the driver when CONFIG_ATH9K_CHANNEL_CONTEXT is not selected. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Use CONFIG_ATH9K_CHANNEL_CONTEXT to conditionally compile P2P-PS code. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Channel contexts are supported only for P2P right now, so make sure that the 'normal' path remains unaffected by using a config option. This will also reduce the size of the driver. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Add a few statements to debug channel context operation. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This reduces clutter in main.c Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Csaba Kiraly 提交于
Based on a quick test with AR9271, TDLS seems to be working fine. Tests were done with 2 Atheros AR9271 based devices with firmware 1.3 (sha1 8d49f928aa40ac53c729189bff1333cd373a7fb5), associated with a WAP54G access point. TDLS worked fine both in WPA2 mode and without encryption. Stations maintained ping flood traffic between each other and towards the AP without significant losses. Not tested with AR7010. TDLS was enabled in earlier patches the same way for other Atheros drivers: ath9k (fd656234), and carl9170 (d1f3de71). Signed-off-by: NCsaba Kiraly <csaba.kiraly@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 04 8月, 2014 1 次提交
-
-
由 Sven Eckelmann 提交于
The ath9k and ath10k will share the definitions of the debugfs spectral structures and enums. Having them in the same place helps to avoid conflicts. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 29 7月, 2014 1 次提交
-
-
由 Rajkumar Manoharan 提交于
Not doing so, could fail on device probing when use_chanctx module param is set to true. Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 7月, 2014 2 次提交
-
-
由 Thomas Gleixner 提交于
We have interfaces. Remove the open coded cruft. Reduces text size along with the code. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Felix Fietkau 提交于
If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Cc: stable@vger.kernel.org Reported-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-