Once we have determined that we will not have all of our desired msix
vectors there is no point in attempting a single msix allocation.  The
driver will already need to read registers to determine the source of
the interrupt the fact that it is msix is moot.  Fallback directly to
msi.
Reported-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Use a single cache for all sed allocations.  No need to make it per
channel.  This also avoids the slub_debug warnings for multiple caches
with the same name.

Switching to dmam_pool_create() to fix leaking the dma pools on
initialization failure and lets us kill ioat3_dma_remove().

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

When performing continuations there are implied sources that need to be
added to the source count. Quoting dma_set_maxpq:

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */

...fix the selection of the 16 source path to take these implied sources
into account.

Note this also kills the BUG_ON(src_cnt < 9) check in
__ioat3_prep_pq16_lock().  Besides not accounting for implied sources
the check is redundant given we already made the path selection.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The array to lookup the sed pool based on the number of sources
(pq16_idx_to_sedi) is 16 entries and expects a max source index.
However, we pass the total source count which runs off the end of the
array when src_cnt == 16.  The minimal fix is to just pass src_cnt-1,
but given we know the source count is > 8 we can just calculate the sed
pool by (src_cnt - 2) >> 3.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Commit 48a9db46 (3.11) removed the memset op in the xor selftest for ioatdma.
The issue is that with the removal of that op, it never replaced the memset
with a CPU memset. The memory being operated on is expected to be zeroes but
was not. This is causing the xor selftest to fail.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NJon Mason <jon.mason@intel.com>
Acked-by: NMark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Remove support for DMA unmapping from drivers as it is no longer
needed (DMA core code is now handling it).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code.  (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Building dma_v3.o triggers a GCC warning:
    drivers/dma/ioat/dma_v3.c: In function ‘__ioat3_prep_pq16_lock’:
    drivers/dma/ioat/dma_v3.c:264:11: warning: array subscript is below array bounds [-Warray-bounds]
    drivers/dma/ioat/dma_v3.c:264:11: warning: array subscript is below array bounds [-Warray-bounds]

This warning is caused by pq16_set_src(). It uses "int idx" as an index
to an eight element array. Changing "idx" to "unsigned" silences this
warning. Apparently GCC can then determine that "idx" will never be
negative.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <djbw@fb.com>

Disable RAID on non-Atom platform and remove related fixups such as the
64-byte alignement restriction on legacy DMA operations (introduced in
commit f26df1a1 as a workaround for silicon errata).
Signed-off-by: NBrice Goglin <Brice.Goglin@inria.fr>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NJon Mason <jon.mason@intel.com>
Signed-off-by: NDan Williams <djbw@fb.com>

There have never been any real users of MEMSET operations since they
have been introduced in January 2007 by commit 7405f74b ("dmaengine:
refactor dmaengine around dma_async_tx_descriptor").  Therefore remove
support for them for now, it can be always brought back when needed.

[sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

v3.3 provides support for write back descriptor error status. This allows
reporting of errors in a descriptor field. In supporting this, certain
errors such as P/Q validation errors no longer halts the channel. The DMA
engine can continue to execute until the end of the chain and allow software
to report the "errors" up the stack. We are also going to mask those error
interrupts and handle them when the "chain" has completed at the end.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This workaround checks for channel 2&3 and remove RAID cap.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

v3.3 introduced 16 sources PQ operations. This also introduced super extended
descriptors to support the 16 srcs operations. This patch adds support for
the 16 sources ops and in turn adds the super extended descriptors for those
ops.

5 SED pools are created depending on the descriptor sizes. An SED can be a 64
bytes sized descriptor or larger and must be physically contiguous. A kmem
cache pool is created for allocating the software descriptor that manages the
hardware descriptor. The super extended descriptor will take place of extended
descriptor under certain operations and be "attached" to the op descriptor
during operation. This is a new feature for ioatdma v3.3.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

CB3.2 and earlier hardware has silicon bugs that are no longer needed with
the new hardware. We don't have to use a NULL op to signal interrupt for
RAID ops any longer. This code make sure the legacy workarounds only happen on
legacy hardware.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The alignment workaround is only necessary for cb3.2 or earlier platforms.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The PQ Val ops work on the newer hardware so we should actually provide support
for it and remove the disabling bits.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Make it so only 3.2 and earlier platform need the PCI config register
clearings since this implementation does not have the registers.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The Intel Atom S1200 family ioatdma changed the channel reset behavior.
It does a reset similar to PCI FLR by resetting all the MSIX
registers. We have to re-init msix interrupts because of this. This
workaround is only specific to this platform and is not expected to carry
over to the later generations.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Adding Haswell PCI device IDs for ioatdma and simplify the detection of
certain Xeon CPUs that has alignment bugs so that modifications can be
changed at a single place going forward.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Looks like only the RAID channels are allowed to have irq coalescing support
in the existing code. Fixing that. The ioat3 cleanup code can handle memcpy
ops anyways
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Making OP field a hex instead of integer to make it more readable. Also add
the dump out of the NEXT field.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

>> drivers/dma/ioat/dma_v3.c:371:6: sparse: symbol 'ioat3_timer_event' was not declared.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

There is a race that can hit during __cleanup() when the ioat->head pointer is
incremented during descriptor submission. The __cleanup() can clear the
PENDING flag when it does not see any active descriptors. This causes new
submitted descriptors to be ignored because the COMPLETION_PENDING flag is
cleared. This was introduced when code was adapted from ioatdma v1 to ioatdma
v2. For v2 and v3, IOAT_COMPLETION_PENDING flag will be abandoned and a new
flag IOAT_CHAN_ACTIVE will be utilized. This flag will also be protected under
the prep_lock when being modified in order to avoid the race.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Reviewed-by: NDan Williams <djbw@fb.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The existing code set a value in the PCI_CHANERRMSK_INT register
for a workaround to address a pre-silicon bug on the Intel 5520 IO hub that
has been fixed when the hardware was released. There is no need for this
code.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <djbw@fb.com>

The PCI IDs for IvyBridge IOAT DMA needs to go into a header file since
dma_v3.c looks them up for certain hardware workarounds. Need to add to the
alignment workaround for IOAT 3.2 since it wasn't fixed in IVB.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <djbw@fb.com>

Make ioat_xor_val_self_test() do DMA unmapping itself and fix handling
of failure cases.

Cc: Dan Williams <djbw@fb.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDan Williams <djbw@fb.com>

ioat does DMA memory sync with DMA_TO_DEVICE direction on a buffer allocated
for DMA_FROM_DEVICE dma, resulting in the following warning from dma debug.
Fixed the dma_sync_single_for_device() call to use the correct direction.

[  226.288947] WARNING: at lib/dma-debug.c:990 check_sync+0x132/0x550()
[  226.288948] Hardware name: ProLiant DL380p Gen8
[  226.288951] ioatdma 0000:00:04.0: DMA-API: device driver syncs DMA memory with different direction [device address=0x00000000ffff7000] [size=4096 bytes] [mapped with DMA_FROM_DEVICE] [synced with DMA_TO_DEVICE]
[  226.288953] Modules linked in: iTCO_wdt(+) sb_edac(+) ioatdma(+) microcode serio_raw pcspkr edac_core hpwdt(+) iTCO_vendor_support hpilo(+) dca acpi_power_meter ata_generic pata_acpi sd_mod crc_t10dif ata_piix libata hpsa tg3 netxen_nic(+) sunrpc dm_mirror dm_region_hash dm_log dm_mod
[  226.288967] Pid: 1055, comm: work_for_cpu Tainted: G        W    3.3.0-0.20.el7.x86_64 #1
[  226.288968] Call Trace:
[  226.288974]  [<ffffffff810644cf>] warn_slowpath_common+0x7f/0xc0
[  226.288977]  [<ffffffff810645c6>] warn_slowpath_fmt+0x46/0x50
[  226.288980]  [<ffffffff81345502>] check_sync+0x132/0x550
[  226.288983]  [<ffffffff81345c9f>] debug_dma_sync_single_for_device+0x3f/0x50
[  226.288988]  [<ffffffff81661002>] ? wait_for_common+0x72/0x180
[  226.288995]  [<ffffffffa019590f>] ioat_xor_val_self_test+0x3e5/0x832 [ioatdma]
[  226.288999]  [<ffffffff811a5739>] ? kfree+0x259/0x270
[  226.289004]  [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma]
[  226.289008]  [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma]
[  226.289011]  [<ffffffffa0195f51>] ioat3_dma_probe+0x1d5/0x2aa [ioatdma]
[  226.289016]  [<ffffffffa0194d12>] ioat_pci_probe+0x139/0x17c [ioatdma]
[  226.289020]  [<ffffffff81354b8c>] local_pci_probe+0x5c/0xd0
[  226.289023]  [<ffffffff81083e50>] ? destroy_work_on_stack+0x20/0x20
[  226.289025]  [<ffffffff81083e68>] do_work_for_cpu+0x18/0x30
[  226.289029]  [<ffffffff8108d997>] kthread+0xb7/0xc0
[  226.289033]  [<ffffffff8166cef4>] kernel_thread_helper+0x4/0x10
[  226.289036]  [<ffffffff81662d20>] ? _raw_spin_unlock_irq+0x30/0x50
[  226.289038]  [<ffffffff81663234>] ? retint_restore_args+0x13/0x13
[  226.289041]  [<ffffffff8108d8e0>] ? kthread_worker_fn+0x1a0/0x1a0
[  226.289044]  [<ffffffff8166cef0>] ? gs_change+0x13/0x13
[  226.289045] ---[ end trace e1618afc7a606089 ]---
[  226.289047] Mapped at:
[  226.289048]  [<ffffffff81345307>] debug_dma_map_page+0x87/0x150
[  226.289050]  [<ffffffffa019653c>] dma_map_page.constprop.18+0x70/0xb34 [ioatdma]
[  226.289054]  [<ffffffffa0195702>] ioat_xor_val_self_test+0x1d8/0x832 [ioatdma]
[  226.289058]  [<ffffffffa0195d77>] ioat3_dma_self_test+0x1b/0x20 [ioatdma]
[  226.289061]  [<ffffffffa01952c3>] ioat_probe+0x2f8/0x348 [ioatdma]
Signed-off-by: NShuah Khan <shuah.khan@hp.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Barry Song <baohua.song@csr.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Silicon errata where when RAID and legacy descriptors are mixed, the legacy
(memcpy and friends) operation must have alignment of 64 bytes to avoid
hanging. This effects Intel Xeon C55xx, C35xx, E5-2600.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Starting with v3.2 Jonathan reports that Xen crashes loading the ioatdma
driver.  A debug run shows:

  ioatdma 0000:00:16.4: desc[0]: (0x300cc7000->0x300cc7040) cookie: 0 flags: 0x2 ctl: 0x29 (op: 0 int_en: 1 compl: 1)
  ...
  ioatdma 0000:00:16.4: ioat_get_current_completion: phys_complete: 0xcc7000

...which shows that in this environment GFP_KERNEL memory may be backed
by a 64-bit dma address.  This breaks the driver's assumption that an
unsigned long should be able to contain the physical address for
descriptor memory.  Switch to dma_addr_t which beyond being the right
size, is the true type for the data i.e. an io-virtual address
inidicating the engine's last processed descriptor.

[stable: 3.2+]
Cc: <stable@vger.kernel.org>
Reported-by: NJonathan Nieder <jrnieder@gmail.com>
Reported-by: NWilliam Dauchy <wdauchy@gmail.com>
Tested-by: NWilliam Dauchy <wdauchy@gmail.com>
Tested-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fixed trivial issues in drivers:
	drivers/dma/imx-sdma.c
	drivers/dma/intel_mid_dma.c
	drivers/dma/ioat/dma_v3.c
	drivers/dma/iop-adma.c
	drivers/dma/sirf-dma.c
	drivers/dma/timb_dma.c
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

Now that we have the completed cookie in the dma_chan structure, we
can consolidate the tx_status functions by providing a function to set
the txstate structure and returning the DMA status.  We also provide
a separate helper to set the residue for cookies which are still in
progress.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

Provide a common function to do the cookie mechanics for completing
a DMA descriptor.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

Every DMA engine implementation declares a last completed dma cookie
in their private dma channel structures.  This is pointless, and
forces driver specific code.  Move this out into the common dma_chan
structure.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
[imx-sdma.c & mxs-dma.c]
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

For versions of the device that implement operation-types 0x87, 0x88
(IOAT_OP_XOR, IOAT_OP_XOR_VAL) this map determines whether a given
source is located in the base or extended descriptor.  Source addresses
6 through 8 require an extended descriptor, hence 0xe0, not 0xd0.  No
shipping hardware currently implements these operation types.
Reported-by: NEvgueni Smogailov <evgueni.smogailov@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

const __read_mostly is not legal and causes section type conflicts.
That's because the read.mostly section is not read only.
Simply drop the __read_mostly designation.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
[drop __read_mostly instead of const]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

After discovering that wide use of prefetch on modern CPUs
could be a net loss instead of a win, net drivers which were
relying on the implicit inclusion of prefetch.h via the list
headers showed up in the resulting cleanup fallout.  Give
them an explicit include via the following $0.02 script.

 =========================================
 #!/bin/bash
 MANUAL=""
 for i in `git grep -l 'prefetch(.*)' .` ; do
 	grep -q '<linux/prefetch.h>' $i
 	if [ $? = 0 ] ; then
 		continue
 	fi

 	(	echo '?^#include <linux/?a'
 		echo '#include <linux/prefetch.h>'
 		echo .
 		echo w
 		echo q
 	) | ed -s $i > /dev/null 2>&1
 	if [ $? != 0 ]; then
 		echo $i needs manual fixup
 		MANUAL="$i $MANUAL"
 	fi
 done
 echo ------------------- 8\<----------------------
 echo vi $MANUAL
 =========================================
Signed-off-by: NPaul <paul.gortmaker@windriver.com>
[ Fixed up some incorrect #include placements, and added some
  non-network drivers and the fib_trie.c case    - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the
incorrect iommu causing faults when the driver initializes.  Add a quirk
to catch this misconfiguration and try falling back to untranslated
operation (which works in the MacPro3,1 case).

Assuming there are other platforms with misconfigured iommus teach the
ioatdma driver to treat initialization failures as non-fatal (just fail
the driver load and emit a warning instead of triggering a BUG_ON).

This can be classified as a boot regression since 2.6.32 on affected
platforms since the ioatdma module did not autoload prior to that
kernel.

Cc: <stable@kernel.org>
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Reported-by: NChris Li <lkml@chrisli.org>
Tested-by: NChris Li <lkml@chrisli.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>