- 25 7月, 2012 1 次提交
-
-
由 Grant Likely 提交于
With the current state of irq_domain, the reverse map is always updated when new IRQs get mapped. This means that the irq_find_mapping() function can be simplified to execute the revmap lookup functions unconditionally This patch adds lookup functions for the revmaps that don't yet have one and removes the slow path lookup code path. v8: Broke out unrelated changes into separate patches. Rebased on Paul's irq association patches. v7: Rebased to irqdomain/next for v3.4 and applied before the removal of 'hint' v6: Remove the slow path entirely. The only place where the slow path could get called is for a linear mapping if the hwirq number is larger than the linear revmap size. There shouldn't be any interrupt controllers that do that. v5: rewrite to not use a ->revmap() callback. It is simpler, smaller, safer and faster to open code each of the revmap lookups directly into irq_find_mapping() via a switch statement. v4: Fix build failure on incorrect variable reference. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Rob Herring <rob.herring@calxeda.com>
-
- 11 7月, 2012 7 次提交
-
-
由 Grant Likely 提交于
irq_create_direct_mapping can only be used with the NOMAP type. Make the function test to ensure it is passed the correct type of irq_domain. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Grant Likely 提交于
In preparation to remove the slow revmap path, eliminate the public radix revmap lookup functions. This simplifies the code and makes the slowpath removal patch a lot simpler. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Grant Likely 提交于
This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Grant Likely 提交于
At irq_setup_virq() time all of the data needed to update the reverse map is available, but the current code ignores it and relies upon the slow path to insert revmap records. This patch adds revmap updating to the setup path so the slow path will no longer be necessary. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Grant Likely 提交于
This patch moves the irq disassociation code out into a separate function in preparation to extend irq_setup_virq to handle multiple irqs and rename it for use by interrupt controller drivers. The new function will be used by irq_setup_virq() in its error path. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Dong Aisheng 提交于
The revmap type should be linear for irq_domain_add_linear function. Signed-off-by: NDong Aisheng <dong.aisheng@linaro.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mark Brown 提交于
A large proportion of interrupt controllers that support legacy mappings do so because non-DT systems need to use fixed IRQ numbers when registering devices via buses but can otherwise use a linear mapping. The interrupt controller itself typically is not affected by the mapping used and best practice is to use a linear mapping where possible so drivers frequently select at runtime depending on if a legacy range has been allocated to them. Standardise this behaviour by providing irq_domain_register_simple() which will allocate a linear mapping unless a positive first_irq is provided in which case it will fall back to a legacy mapping. This helps make best practice for irq_domain adoption clearer. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 06 7月, 2012 1 次提交
-
-
由 Grant Likely 提交于
The pattern (np ? np->full_name : "<none>") is rather common in the kernel, but can also make for quite long lines. This patch adds a new inline function, of_node_full_name() so that the test for a valid node pointer doesn't need to be open coded at all call sites. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 18 6月, 2012 1 次提交
-
-
由 Grant Likely 提交于
There isn't a really compelling reason to force ->map to be populated, so allow it to be left unset. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
- 16 6月, 2012 3 次提交
-
-
由 Grant Likely 提交于
Where irq_domain_associate() is called in irq_create_mapping, there is no need to test for IRQ_DOMAIN_MAP_LEGACY because it is already tested for earlier in the routine. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
-
由 Paul Mundt 提交于
While common irqdesc allocation is node aware, the irqdomain code is not. Presently we observe a number of regressions/inconsistencies on NUMA-capable platforms: - Platforms using irqdomains with legacy mappings, where the irq_descs are allocated node-local and the irqdomain data structure is not. - Drivers implementing irqdomains will lose node locality regardless of the underlying struct device's node id. This plugs in NUMA node id proliferation across the various allocation callsites by way of_node_to_nid() node lookup. While of_node_to_nid() does the right thing for OF-capable platforms it doesn't presently handle the non-DT case. This is trivially dealt with by simply wraping in to numa_node_id() unconditionally. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
The pattern (np ? np->full_name : "<none>") is rather common in the kernel, but can also make for quite long lines. This patch adds a new inline function, of_node_full_name() so that the test for a valid node pointer doesn't need to be open coded at all call sites. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 20 5月, 2012 5 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Paul Mundt 提交于
Convert to pr_fmt before things start to get out of hand and some janitors start getting overly excited. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Paul Mundt 提交于
Presently irq_domain_simple_map() isn't labelled as static, but there's no definition for it in the public irqdomain header either. At present all in-tree ->map users have meaningful work to do, and all others are using irq_domain_simple_ops directly. Make it static for now, as it can always be exported and added to the public API later. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Paul Mundt 提交于
modules making use of irq domains at the very least need access to the add/remove/lookup routines, though there's nothing preventing them from using the remainder of the public API, either. The current set of exports seem primarily geared at DT-enabled platforms using DT-backed IRQ domains, where many of the API accesses are hidden away in OF code. The non-DT cases need to do most of this on their own. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Paul Mundt 提交于
Now that IRQ domains are being used by modules it's necessary to support removing them, too. This adds a new irq_domain_remove() routine for doing the bulk of the heavy lifting. It's left as an exercise to the caller to ensure all mappings have been appropriatey disposed of before attempting to remove the domain. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 13 4月, 2012 1 次提交
-
-
由 Grant Likely 提交于
sizeof(void*) returns an unsigned long, but it was being used as a width parameter to a "%-*s" format string which requires an int. On 64 bit platforms this causes a type mismatch: linux/kernel/irq/irqdomain.c:575: warning: field width should have type 'int', but argument 6 has type 'long unsigned int' This change casts the size to an int so printf gets the right data type. Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: David Daney <david.daney@cavium.com>
-
- 12 4月, 2012 1 次提交
-
-
由 Grant Likely 提交于
This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com>
-
- 11 4月, 2012 2 次提交
-
-
由 Grant Likely 提交于
This patch fixes the irq_domain_mapping debugfs output to pad pointer values with leading zeros so that pointer values are displayed correctly. Otherwise you get output similar to "0x 5e0000000000000". Also, when the irq_domain is set to 'null' Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: David Daney <david.daney@cavium.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
-
由 David Daney 提交于
In commit 4bbdd45a (irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead) code was added that ignores error returns from irq_alloc_desc_from() by (silently) casting the return value to unsigned. The negitive value error return now suddenly looks like a valid irq number. Commits cc79ca69 (irq_domain: Move irq_domain code from powerpc to kernel/irq) and 1bc04f2c (irq_domain: Add support for base irq and hwirq in legacy mappings) move this code to its current location in irqdomain.c The result of all of this is a null pointer dereference OOPS if one of the error cases is hit. The fix: Don't cast away the negativeness of the return value and then check for errors. Signed-off-by: NDavid Daney <david.daney@cavium.com> Acked-by: NRob Herring <rob.herring@calxeda.com> [grant.likely: dropped addition of new 'irq' variable] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 30 3月, 2012 1 次提交
-
-
由 Grant Likely 提交于
The debugfs code is really generic for all platforms. This patch removes the powerpc-specific directory reference and makes it available to all architectures. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 25 2月, 2012 1 次提交
-
-
由 Grant Likely 提交于
This patch makes IRQ_DOMAIN usable on MIPS. It uses an ugly workaround to preserve current behaviour so that MIPS has time to add irq_domain registration to the irq controller drivers. The workaround will be removed in Linux v3.6 Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org
-
- 16 2月, 2012 9 次提交
-
-
由 Grant Likely 提交于
Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
Rather than having each interrupt controller driver creating its own barely unique .xlate function for irq_domain, create a library of translators which any driver can use directly. v5: - Remove irq_domain_xlate_pci(). It was incorrect. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
irq_domain_add_simple() was a stop-gap measure until complete irq_domain support was complete. This patch removes the irq_domain_add_simple() interface. This patch also drops the explicit irq_domain initialization performed by the mach-versatile code because the versatile interrupt controller already has irq_domain support built into it. This was a bug that was hanging around quietly for a while, but with the full irq_domain which actually verifies that irq_domain ranges are available it would cause the registration to fail and the system wouldn't boot. v4: Fixed number of irqs in mx5 gpio code v2: Updated to pass in host_data pointer on irq_domain allocation. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
This patch removes the simplistic implementation of irq_domains and enables the powerpc infrastructure for all irq_domain users. The powerpc infrastructure includes support for complex mappings between Linux and hardware irq numbers, and can manage allocation of irq_descs. This patch also converts the few users of irq_domain_add()/irq_domain_del() to call irq_domain_add_legacy() instead. v3: Fix bug that set up too many irqs in translation range. v2: Fix removal of irq_alloc_descs() call in gic driver Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
No functional changes. Replaces non-exported references to 'host' with domain. Does not change any symbol names referenced by other .c files. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
zero always means no irq when using irq domains. Get rid of the NO_IRQ references. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
- 15 2月, 2012 2 次提交
-
-
由 Grant Likely 提交于
Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: NOlof Johansson <olof@lixom.net>
-
由 Grant Likely 提交于
irq_domain printk's too much. Drop some output. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: NOlof Johansson <olof@lixom.net>
-
- 28 12月, 2011 1 次提交
-
-
由 Rob Herring 提交于
A DT node may have more than 1 domain associated with it, so make sure the hwirq number is within range when doing DT translation. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NShawn Guo <shawn.guo@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 24 12月, 2011 1 次提交
-
-
由 Jamie Iles 提交于
irqdomain support is used in interrupt controller drivers that may not have device tree support but only need the basic HW->Linux irq translation. Rather than having each of these implement their own IRQ domain, allow them to use the simple ops. Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NRob Herring <robherring2@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 10月, 2011 1 次提交
-
-
由 Rob Herring 提交于
Interrupt controllers can have non-zero starting value for h/w irq numbers. Adding support in irq_domain allows the domain hwirq numbering to match the interrupt controllers' numbering. As this makes looping over irqs for a domain more complicated, add loop iterators to iterate over all hwirqs and irqs for a domain. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NJamie Iles <jamie@jamieiles.com> Tested-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 9月, 2011 1 次提交
-
-
由 Rob Herring 提交于
The sanity check in irq_domain_add() tests desc->irq_data != NULL or irq_data->domain != NULL. This prevents adding an irq_domain to a irq descriptor when irq_data exists, which true when the irq descriptor exists. This went unnoticed so far as the simple domain code did not enter this code path because domain->nr_irqs is always 0 for the simple domains. Split the check for irq_data == NULL out and have a separate warning for it. [ tglx: Made the check for irq_data == NULL separate ] Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: marc.zyngier@arm.com Cc: thomas.abraham@linaro.org Cc: jamie@jamieiles.com Cc: b-cousson@ti.com Cc: shawn.guo@linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Link: http://lkml.kernel.org/r/1316017900-19918-3-git-send-email-robherring2@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 7月, 2011 1 次提交
-
-
由 Grant Likely 提交于
irq_domain_generate_simple() is an easy way to generate an irq translation domain for simple irq controllers. It assumes a flat 1:1 mapping from hardware irq number to an offset of the first linux irq number assigned to the controller Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-