Noting pause loop exited vcpu or cpu relax intercepted helps in
filtering right candidate to yield. Wrong selection of vcpu;
i.e., a vcpu that just did a pl-exit or cpu relax intercepted may
contribute to performance degradation.
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> # on s390x
Signed-off-by: NAvi Kivity <avi@redhat.com>

The parameter, 'kvm', is not used in gfn_to_pfn_memslot, we can happily remove
it
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Remove them since they are not used anymore
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

bad_pfn is not used out of kvm_main.c, so mark it static, also move it near
hwpoison_pfn and fault_pfn
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Using get_fault_pfn to cleanup the code
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This restricts hva handling in mmu code and makes it easier to extend
kvm_handle_hva() so that it can treat a range of addresses later in this
patch series.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: Alexander Graf <agraf@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In order to avoid compilation failure when KVM is not compiled in,
guard the mmu_notifier specific sections with both CONFIG_MMU_NOTIFIER
and KVM_ARCH_WANT_MMU_NOTIFIER, like it is being done in the rest of
the KVM code.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The KVM code sometimes uses CONFIG_HAVE_KVM_IRQCHIP to protect
code that is related to IRQ routing, which not all in-kernel
irqchips may support.

Use KVM_CAP_IRQ_ROUTING instead.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduces a couple of print functions, which are essentially wrappers
around standard printk functions, with a KVM: prefix.

Functions introduced or modified are:
 - kvm_err(fmt, ...)
 - kvm_info(fmt, ...)
 - kvm_debug(fmt, ...)
 - kvm_pr_unimpl(fmt, ...)
 - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...)
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

lpage_info is created for each large level even when the memory slot is
not for RAM.  This means that when we add one slot for a PCI device, we
end up allocating at least KVM_NR_PAGE_SIZES - 1 pages by vmalloc().

To make things worse, there is an increasing number of devices which
would result in more pages being wasted this way.

This patch mitigates this problem by using kvm_kvzalloc().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Using RCU for lockless shadow walking can increase the amount of memory
in use by the system, since RCU grace periods are unpredictable.  We also
have an unconditional write to a shared variable (reader_counter), which
isn't good for scaling.

Replace that with a scheme similar to x86's get_user_pages_fast(): disable
interrupts during lockless shadow walk to force the freer
(kvm_mmu_commit_zap_page()) to wait for the TLB flush IPI to find the
processor with interrupts enabled.

We also add a new vcpu->mode, READING_SHADOW_PAGE_TABLES, to prevent
kvm_flush_remote_tlbs() from avoiding the IPI.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch implements the directed yield hypercall found on other
System z hypervisors. It delegates execution time to the virtual cpu
specified in the instruction's parameter.

Useful to avoid long spinlock waits in the guest.

Christian Borntraeger: moved common code in virt/kvm/
Signed-off-by: NKonstantin Weitz <WEITZKON@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently, MSI messages can only be injected to in-kernel irqchips by
defining a corresponding IRQ route for each message. This is not only
unhandy if the MSI messages are generated "on the fly" by user space,
IRQ routes are a limited resource that user space has to manage
carefully.

By providing a direct injection path, we can both avoid using up limited
resources and simplify the necessary steps for user land.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

MMIO that are split across a page boundary are currently broken - the
code does not expect to be aborted by the exit to userspace for the
first MMIO fragment.

This patch fixes the problem by generalizing the current code for handling
16-byte MMIOs to handle a number of "fragments", and changes the MMIO
code to create those fragments.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We've been adding new mappings, but not destroying old mappings.
This can lead to a page leak as pages are pinned using
get_user_pages, but only unpinned with put_page if they still
exist in the memslots list on vm shutdown.  A memslot that is
destroyed while an iommu domain is enabled for the guest will
therefore result in an elevated page reference count that is
never cleared.

Additionally, without this fix, the iommu is only programmed
with the first translation for a gpa.  This can result in
peer-to-peer errors if a mapping is destroyed and replaced by a
new mapping at the same gpa as the iommu will still be pointing
to the original, pinned memory address.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Now that we do neither double buffering nor heuristic selection of the
write protection method these are not needed anymore.

Note: some drivers have their own implementation of set_bit_le() and
making it generic needs a bit of work; so we use test_and_set_bit_le()
and will later replace it with generic set_bit_le().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On PowerPC, we sometimes use a waitqueue per core, not per thread,
so we can't always use the vcpu internal waitqueue.

This code has been generalized by Christoffer Dall recently, but
unfortunately broke compilation for PowerPC. At the time the helper
function is defined, struct kvm_vcpu is not declared yet, so we can't
dereference it.

This patch moves all logic into the generic inline function, at which
time we have all information necessary.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The kvm_vcpu_kick function performs roughly the same funcitonality on
most all architectures, so we shouldn't have separate copies.

PowerPC keeps a pointer to interchanging waitqueues on the vcpu_arch
structure and to accomodate this special need a
__KVM_HAVE_ARCH_VCPU_GET_WQ define and accompanying function
kvm_arch_vcpu_wq have been defined. For all other architectures this
is a generic inline that just returns &vcpu->wq;
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm_io_bus devices are used for ioevent, pit, pic, ioapic,
coalesced_mmio.

Currently Qemu only emulates one PCI bus, it contains 32 slots,
one slot contains 8 functions, maximum of supported PCI devices:
 1 * 32 * 8 = 256. One virtio-blk takes one iobus device,
one virtio-net(vhost=on) takes two iobus devices.
The maximum of coalesced mmio zone is 100, each zone
has an iobus devices. So 300 io_bus devices are not enough.

Set an upper bounds for kvm_io_range to limit userspace.
1000 is a very large limit and not bloat the typical user.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch makes the kvm_io_range array can be resized dynamically.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

As kvm_notify_acked_irq calls kvm_assigned_dev_ack_irq under
rcu_read_lock, we cannot use a mutex in the latter function. Switch to a
spin lock to address this.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

PCI 2.3 allows to generically disable IRQ sources at device level. This
enables us to share legacy IRQs of such devices with other host devices
when passing them to a guest.

The new IRQ sharing feature introduced here is optional, user space has
to request it explicitly. Moreover, user space can inform us about its
view of PCI_COMMAND_INTX_DISABLE so that we can avoid unmasking the
interrupt and signaling it if the guest masked it via the virtualized
PCI config space.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If some vcpus are created before KVM_CREATE_IRQCHIP, then
irqchip_in_kernel() and vcpu->arch.apic will be inconsistent, leading
to potential NULL pointer dereferences.

Fix by:
- ensuring that no vcpus are installed when KVM_CREATE_IRQCHIP is called
- ensuring that a vcpu has an apic if it is installed after KVM_CREATE_IRQCHIP

This is somewhat long winded because vcpu->arch.apic is created without
kvm->lock held.

Based on earlier patch by Michael Ellerman.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Some members of kvm_memory_slot are not used by every architecture.

This patch is the first step to make this difference clear by
introducing kvm_memory_slot::arch;  lpage_info is moved into it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch cleans up the code and removes the "(void)level;" warning
suppressor.

Note that we can also use this for PT_PAGE_TABLE_LEVEL to treat every
level uniformly later.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This moves __gfn_to_memslot() and search_memslots() from kvm_main.c to
kvm_host.h to reduce the code duplication caused by the need for
non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c to call
gfn_to_memslot() in real mode.

Rather than putting gfn_to_memslot() itself in a header, which would
lead to increased code size, this puts __gfn_to_memslot() in a header.
Then, the non-modular uses of gfn_to_memslot() are changed to call
__gfn_to_memslot() instead.  This way there is only one place in the
source code that needs to be changed should the gfn_to_memslot()
implementation need to be modified.

On powerpc, the Book3S HV style of KVM has code that is called from
real mode which needs to call gfn_to_memslot() and thus needs this.
(Module code is allocated in the vmalloc region, which can't be
accessed in real mode.)

With this, we can remove builtin_gfn_to_memslot() from book3s_hv_rm_mmu.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This adds an smp_wmb in kvm_mmu_notifier_invalidate_range_end() and an
smp_rmb in mmu_notifier_retry() so that mmu_notifier_retry() will give
the correct answer when called without kvm->mmu_lock being held.
PowerPC Book3S HV KVM wants to use a bitlock per guest page rather than
a single global spinlock in order to improve the scalability of updates
to the guest MMU hashed page table, and so needs this.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch exports the s390 SIE hardware control block to userspace
via the mapping of the vcpu file descriptor. In order to do so,
a new arch callback named kvm_arch_vcpu_fault  is introduced for all
architectures. It allows to map architecture specific pages.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces a new config option for user controlled kernel
virtual machines. It introduces a parameter to KVM_CREATE_VM that
allows to set bits that alter the capabilities of the newly created
virtual machine.
The parameter is passed to kvm_arch_init_vm for all architectures.
The only valid modifier bit for now is KVM_VM_S390_UCONTROL.
This requires CAP_SYS_ADMIN privileges and creates a user controlled
virtual machine on s390 architectures.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any
other BUG variant in a static inline (i.e. not in a #define) then
that header really should be including <linux/bug.h> and not just
expecting it to be implicitly present.

We can make this change risk-free, since if the files using these
headers didn't have exposure to linux/bug.h already, they would have
been causing compile failures/warnings.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Use perf_events to emulate an architectural PMU, version 2.

Based on PMU version 1 emulation by Avi Kivity.

[avi: adjust for cpuid.c]
[jan: fix anonymous field initialization for older gcc]
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Drop bsp_vcpu pointer from kvm struct since its only use is incorrect
anyway.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The operation of getting dirty log is frequent when framebuffer-based
displays are used(for example, Xwindow), so, we introduce a mapping table
to speed up id_to_memslot()
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Sort memslots base on its size and use line search to find it, so that the
larger memslots have better fit

The idea is from Avi
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce id_to_memslot to get memslot by slot id
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce kvm_for_each_memslot to walk all valid memslot
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce update_memslots to update slot which will be update to
kvm->memslots
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce KVM_MEM_SLOTS_NUM macro to instead of
KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed for the next patch which uses this number to decide how to write
protect a slot.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The kvm_host struct can include an mmu_notifier struct but mmu_notifier.h is
not included directly.
Signed-off-by: NEric B Munson <emunson@mgebm.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>