Use the previously unused TPIDRPRW register to store percpu offsets.
TPIDRPRW is only accessible in PL1, so it can only be used in the kernel.

This replaces 2 loads with a mrc instruction for each percpu variable
access. With hackbench, the performance improvement is 1.4% on Cortex-A9
(highbank). Taking an average of 30 runs of "hackbench -l 1000" yields:

Before: 6.2191
After: 6.1348

Will Deacon reported similar delta on v6 with 11MPCore.

The asm "memory clobber" are needed here to ensure the percpu offset
gets reloaded. Testing by Will found that this would not happen in
__schedule() which is a bit of a special case as preemption is disabled
but the execution can move cores.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As soon as the device tree is unflattened the cpu logical to physical
mapping is carried out in setup_arch to build a proper array of MPIDR and
corresponding logical indexes.

The mapping could have been carried out using the flattened DT blob and
related primitives, but since the mapping is not needed by early boot
code it can safely be executed when the device tree has been uncompressed to
its tree data structure.

This patch adds the arm_dt_init_cpu maps() function call in setup_arch().

If the kernel is not compiled with DT support the function is empty and
no logical mapping takes place through it; the mapping carried out in
smp_setup_processor_id() is left unchanged.
If DT is supported the mapping created in smp_setup_processor_id() is overriden.
The DT mapping also sets the possible cpus mask, hence platform
code need not set it again in the respective smp_init_cpus() functions.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>

This patch applies some basic changes to the smp_setup_processor_id()
ARM implementation to make the code that builds cpu_logical_map more
uniform across the kernel.

The function now prints the full extent of the boot CPU MPIDR[23:0] and
initializes the cpu_logical_map for CPUs up to nr_cpu_ids.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>

Currently, reading /proc/cpuinfo provides userspace with CPU ID of
the CPU carrying out the read from the file. This is fine as long as all
CPUs in the system are the same. With the advent of big.LITTLE and
heterogenous ARM systems this approach provides user space with incorrect
bits of information since CPU ids in the system might differ from the one
provided by the CPU reading the file.

This patch updates the cpuinfo show function so that a read from
/proc/cpuinfo prints HW information for all online CPUs at once, mirroring
 x86 behaviour.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>

In order to easily detect pathological cases, print some diagnostics
when the kernel boots.

This also provides helpers to detect that HYP mode is actually available,
which can be used by other subsystems to enable HYP specific features.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This adds a 'struct smp_operations' to abstract the CPU initialization
and hot plugging functions on SMP systems, which otherwise conflict
in a multiplatform kernel. This also helps shmobile and potentially
others that have more than one method to do these.

To allow the kernel to continue building, the platform hooks are
defined as weak symbols which are overrided by the platform code.
Once all platforms are converted, the "weak" attribute will be
removed and the function made static.

Unlike the original version from Marc, this new version from Arnd
does not use a generalized abstraction for per-soc data structures
but only tries to solve the problem for the SMP operations. This
way, we can collapse the previous four data structures into a
single struct, which is less systematic but also easier to follow
as a causal reader.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Make ATAGS parsing into a source file of its own, namely atags_parse.c.
Also rename compat.c to atags_compat.c to make it clearer what it is
about.  Same for atags.c which is now atags_proc.c. Gather all the atags
function declarations into a common atags.h.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The memory regions which are passed to arm_add_memory() from
device tree blobs via early_init_dt_add_memory_arch() can
have sizes which are larger than will fit in a 32 bit integer,
so switch to using a phys_addr_t to hold them, to avoid
silently dropping the top 32 bits of the size. Similarly, use
phys_addr_t in early_mem() so that mem=size@start command line
options specifying more than 4GB behave sensibly.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds support for CMA to dma-mapping subsystem for ARM
architecture. By default a global CMA area is used, but specific devices
are allowed to have their private memory areas if required (they can be
created with dma_declare_contiguous() function during board
initialisation).

Contiguous memory areas reserved for DMA are remapped with 2-level page
tables on boot. Once a buffer is requested, a low memory kernel mapping
is updated to to match requested memory access type.

GFP_ATOMIC allocations are performed from special pool which is created
early during boot. This way remapping page attributes is not needed on
allocation time.

CMA has been enabled unconditionally for ARMv6+ systems.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NRob Clark <rob.clark@linaro.org>
Tested-by: NOhad Ben-Cohen <ohad@wizery.com>
Tested-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: NRobert Nelson <robertcnelson@gmail.com>
Tested-by: NBarry Song <Baohua.Song@csr.com>

This allows platforms to set up things that need to be done at
late_initcall time.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Tested-by: NRobert Lee <rob.lee@linaro.org>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If a bank of memory spanning the 4GB boundary is added on a !CONFIG_LPAE
kernel then we will hang early during boot since the memory bank will
have wrapped around to zero.

This patch truncates memory banks for !LPAE configurations when the end
address is not representable in 32 bits.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Disintegrate asm/system.h for ARM.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Russell King <linux@arm.linux.org.uk>
cc: linux-arm-kernel@lists.infradead.org

Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Initialize the contents of the vectors page immediately after we
allocate the page, but before we map it.  This avoids any possible
aliases with other mappings which may need to be flushed after the
page has been mapped irrespective of the cache type.

We follow this later with a flush_cache_all() after all static memory
mappings have been initialized, which ensures that this is safe from
any cache effects.
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It turns out that the logical CPU mapping is useful even when !CONFIG_SMP
for manipulation of devices like interrupt and power controllers when
running a UP kernel on a CPU other than 0. This can happen when kexecing
a UP image from an SMP kernel.

In the future, multi-cluster systems running AMP configurations will
require something similar for mapping cluster IDs, so it makes sense to
decouple this logic in preparation for this support.
Acked-by: NYang Bai <hamo.by@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reported-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the following build warning:

  CC      arch/arm/kernel/setup.o
In file included from arch/arm/kernel/setup.c:39:
arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined
In file included from arch/arm/kernel/setup.c:24:
include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition

Since commit 93a72052 (crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn)
the inclusion of <linux/crash_dump.h> is no longer needed.

Remove the inclusion of <linux/crash_dump.h> and the build warning is fixed.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

All other ports use "Kernel code" to identify the Kernel text segment
in /proc/iomem. Change the ARM resources to do the same.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arm_dma_zone_size is used by arm_bootmem_free() which is called by
paging_init(). Thus it needs to be set before calling it.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Cc: stable@kernel.org
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

24aa0788 (memblock, x86: Replace memblock_x86_reserve/free_range()
with generic ones) removed arch/x86/include/asm/memblock.h and dropped
its inclusion from include/linux/memblock.h which breaks other
architectures which depended on the generic memblock.h pulling in the
arch specific one.

However, the proper fix isn't adding back the asm inclusion.  memblock
doesn't have any arch dependent part and doesn't need arch specific
header file and asm/memblock.h files are either practically empty or
contain mostly unrelated arch specific stuff.

* In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is
  either empty or just contains unused MEMBLOCK_DBG() macro.  Remove
  them.

* In arm and unicore32, asm/memblock.h contains arch specific stuff.
  Include it directly from its users.  It might be a good idea to
  rename the header file to avoid confusion.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>

The linker places the unwind tables in readonly sections. So when using
an XIP kernel these are located in ROM and cannot be modified.
For that reason the current approach to convert the relative offsets in
the unwind index to absolute addresses early in the boot process doesn't
work with XIP.

The offsets in the unwind index section are signed 31 bit numbers and
the structs are sorted by this offset. So it first has offsets between
0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets
between 0x00000000 and 0x3fffffff. When seperating these two blocks the
numbers are sorted even when interpreting the offsets as unsigned longs.

So determine the first non-negative entry once and track that using the
new origin pointer. The actual bisection can then use a plain unsigned
long comparison. The only thing that makes the new bisection more
complicated is that the offsets are relative to their position in the
index section, so the key to search needs to be adapted accordingly in
each step.

Moreover several consts are added to catch future writes and rename the
member "addr" of struct unwind_idx to "addr_offset" to better match the
new semantic. (This has the additional benefit of breaking eventual
users at compile time to make them aware of the change.)

In my tests the new algorithm was a tad faster than the original and has
the additional upside of not needing the initial conversion and so saves
some boot time and it's possible to unwind even earlier.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The meminfo array has to be sorted before sanity_check_meminfo() in
arch/arm/mm/mmu.c is called for it to work properly.  This also allows
for a simpler find_limits() in arch/arm/mm/init.c.

The sort is moved to arch/arm/kernel/setup.c because that's where the
meminfo array is populated.  Eventually this should be improved upon
to make the memory bank parser a bit more robust against problems
such as overlapping memory ranges.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

setup_processor copies the arch_name and elf_name fields out of the
selected proc_info_list into two fixed size buffers.

Since the proc_info_list structure is defined in a proc_*.S assembly
file, this can lead to subtle errors if the strings defined there are
too long (for example, corrupting the machine ID).

This patch uses snprintf instead of sprintf to ensure that these buffers
are not overrun.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Change 'soft_reboot' into a more generic 'restart_mode' variable,
allowing the default restart mode to be specified.
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a restart hook to the machine_desc record so we don't have to
populate all platforms with init_early methods to initialize the
arm_pm_restart function pointer.
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Many of the core ARM kernel files are not modules, but just
including module.h for exporting symbols.  Now these files can
use the lighter footprint export.h for this role.

There are probably lots more, but ARM files of mach-* and plat-*
don't get coverage via a simple yesconfig build.  They will have
to be cleaned up and tested via using their respective configs.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The Cache Type Register L1Ip field identifies I-caches with a PIPT
policy using the encoding 11b.

This patch extends the cache policy parsing to identify PIPT I-caches
correctly and prevent them from being treated as VIPT aliasing in cases
where they are sufficiently large.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Get rid of the mdesc pointer in the fixup function call.  No one uses
the mdesc pointer, it shouldn't be modified anyway, and we can't wrap
it, so let's remove it.

Platform files found by:

  $ regexp=$(git grep -h '\.fixup.*=' arch/arm |
		sed 's!.*= *\([^,]*\),* *!\1!' | sort -u |
		tr '\n' '|' | sed 's,|$,,;s,|,\\|,g')
  $ git grep $regexp arch/arm
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The CPU architecture really should not be changing at runtime, so
make it a global variable instead of a function.

The cpu_architecture() function declared in <asm/system.h> remains
the correct way to read this variable from C code.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Reviewed-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that there is no more users, we can remove it from the kernel.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The boot_params member of the mdesc structure is used to provide a
default physical address for the ATAG list.  Since this value is fixed
at compile time and sometimes based on constants such as ARCH_PHYS_OFFSET,
it gets in the way of runtime PHYS_OFFSET and CONFIG_ARM_PATCH_PHYS_VIRT
usage.

Let's introduce atag_offset which should contains only the relative
offset from PHYS_OFFSET instead of an absolute value, in preparation
to move all instance of boot_params over to it.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NPetr Štetiar <ynezz@true.cz>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The current cache detection code does not check for an aliasing
I-cache if the D-cache is found to be VIPT aliasing.

This patch fixes the problem by always checking for an aliasing
I-cache on v6 and later.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Modern ARMv7-A cores can optionally implement these new hardware
features:

- VFPv4:
    The latest version of the ARMv7 vector floating-point extensions,
    including hardware support for fused multiple accumulate. D16 or D32
    variants may be implemented.

- Integer divide:
    The SDIV and UDIV instructions provide signed and unsigned integer
    division in hardware. When implemented, these instructions may be
    available in either both Thumb and ARM, or Thumb only.

This patch adds new HWCAP defines to describe these new features. The
integer divide capabilities are split into two bits for ARM and Thumb
respectively. Whilst HWCAP_IDIVA should never be set if HWCAP_IDIVT is
clear, separating the bits makes it easier to interpret from userspace.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Ensure that the meminfo array is sanity checked before we pass the
memory to memblock.  This helps to ensure that memblock and meminfo
agree on the dimensions of memory, especially when more memory is
passed than the kernel can deal with.
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

cpu_proc_init() does processor specific initialization, which we do
at boot time.  We have been omitting to do this on resume, which
causes some of this initialization to be skipped.  We've also been
skipping this on SMP initialization too.

Ensure that cpu_proc_init() is always called appropriately by
moving it into cpu_init(), and move cpu_init() to a more appropriate
point in the boot initialization.
Tested-by: NKevin Hilman <khilman@ti.com>
Acked-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If a dtb is passed to the kernel then the kernel needs to iterate
through compiled-in mdescs looking for one that matches and move the
dtb data to a safe location before it gets accidentally overwritten by
the kernel.

This patch creates a new function, setup_machine_fdt() which is
analogous to the setup_machine_atags() created in the previous patch.
It does all the early setup needed to use a device tree machine
description.

v5: - Print warning with neither dtb nor atags are passed to the kernel
    - Fix bug in setting of __machine_arch_type to the selected machine,
      not just the last machine in the list.
Reported-by: NTixy <tixy@yxit.co.uk>
    - Copy command line directly into boot_command_line instead of cmd_line
v4: - Dump some output when a matching machine_desc cannot be found
v3: - Added processing of reserved list.
    - Backed out the v2 change that copied instead of reserved the
      dtb.  dtb is reserved again and the real problem was fixed by
      using alloc_bootmem_align() for early allocation of RAM for
      unflattening the tree.
    - Moved cmd_line and initrd changes to earlier patch to make series
      bisectable.
v2: Changed to save the dtb by copying into an allocated buffer.
    - Since the dtb will very likely be passed in the first 16k of ram
      where the interrupt vectors live, memblock_reserve() is
      insufficient to protect the dtb data.

[based on work originally written by Jeremy Kerr <jeremy.kerr@canonical.com>]
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

In preparation for adding device tree support, this patch consolidates
all of the atag-specific setup into a single function.

v5: - drop double printk("Machine; %s\n", ...); call.
    - leave copying boot_command_line in setup_arch() since it isn't
      atags specific.
v4: - adapt to the removal of lookup_machine_type()
    - break out dump of machine_desc table into dump_machine_table()
      because the device tree probe code will use it.
    - Add for_each_machine_desc() macro
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch allows the provided CONFIG_CMDLINE to be concatenated
with the one provided by the boot loader. This is useful to
merge the static values defined in CONFIG_CMDLINE with the
boot loader's (possibly) more dynamic values, such as startup
reasons and more.
Signed-off-by: NVictor Boivie <victor.boivie@sonyericsson.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@sonyericsson.com>
Signed-off-by: NOskar Andero <oskar.andero@sonyericsson.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add some basic empty infrastructure for DT support on ARM.

v5: - Fix off-by-one error in size calculation of initrd
    - Stop mucking with cmd_line, and load command line from dt into
      boot_command_line instead which matches the behaviour of ATAGS booting
v3: - moved cmd_line export and initrd setup to this patch to make the
      series bisectable.
    - switched to alloc_bootmem_align() for allocation when
      unflattening the device tree.  memblock_alloc() was not the
      right interface.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>