As KVM needs to know about the availability of GICv4 to enable
direct injection of interrupts, let's advertise the feature in
the gic_kvm_info structure.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Get the show on the road...
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Do a braindump of the way things are supposed to work.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the required interfaces to map, unmap and update a VLPI.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the required interfaces to schedule a VPE and perform a
VINVALL command.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When creating a VM, it is very convenient to have an irq domain
containing all the doorbell interrupts associated with that VM
(each interrupt representing a VPE).
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

A long time ago, GITS_CTLR[1] used to be called GITC_CTLR.EnableVLPI.
It has been subsequently deprecated and is now an "Implementation
Defined" bit that may ot may not be set for GICv4. Brilliant.

And the current crop of the FastModel requires that bit for VLPIs
to be enabled. Oh well... Let's set it and find out what breaks.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

While the doorbell interrupts are usually driven by the HW itself,
having a way to trigger them independently has proved to be a
really useful debug feature. As it is actually very little code,
let's add it to the VPE irqchip operations.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

After moving a VPE from a redistributor to another, we're still left
with a potential pending doorbell interrupt on the old redistributor.
That interrupt should be moved to the new one to be either cleared
or take, depending on what the hypervisor wishes to do.

So let's move it right after having execited VMOVP. This doesn't
add much cost in the !DirectLPI case (we trade a DISCARD for a MOVI),
and the cost of the DIRECTLPI case should be minimal (two extra MMIO
accesses).
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When we don't have the DirectLPI feature, we must work around the
architecture shortcomings to be able to perform the required
maintenance (interrupt masking, clearing and injection).

For this, we create a fake device whose sole purpose is to
provide a way to issue commands as if we were dealing with LPIs
coming from that device (while they actually originate from
the ITS). This fake device doesn't have LPIs allocated to it,
but instead uses the VPE LPIs.

Of course, this could be a real bottleneck, and a naive
implementation would require 6 commands to issue an invalidation.

Instead, let's allocate at least one event per physical CPU
(rounded up to the next power of 2), and opportunistically
map the VPE doorbell to an event. This doorbell will be mapped
until we roll over and need to reallocate this slot.

This ensures that most of the time, we only need 2 commands
to issue an INV, INT or CLEAR, making the performance a lot
better, given that we always issue a CLEAR on entry, and
an INV on each side of a trapped WFI.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The normal course of action when allocating the ITS' view of a
device is to allocate the corresponding LPIs. But we're about
to introduce devices that borrow their interrupts from
some other entities.

So let's make the allocation optional.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When masking/unmasking a doorbell interrupt, it is necessary
to issue an invalidation to the corresponding redistributor.
We use the DirectLPI feature by writting directly to the corresponding
redistributor.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When we're about to run a vcpu, it is crucial that the redistributor
associated with the physical CPU is being told about the new residency.

This is abstracted by hijacking the irq_set_affinity method for the
doorbell interrupt associated with the VPE. It is expected that the
hypervisor will call this method before scheduling the VPE.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When a guest issues a INVALL command targetting a collection, it must
be translated into a VINVALL for the VPE that has this collection.

This patch implements a hook that offers this functionallity to the
hypervisor.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When a VPE is scheduled to run, the corresponding redistributor must
be told so, by setting VPROPBASER to the VM's property table, and
VPENDBASER to the vcpu's pending table.

When scheduled out, we preserve the IDAI and PendingLast bits. The
latter is specially important, as it tells the hypervisor that
there are pending interrupts for this vcpu.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

V{PEND,PROP}BASER being 64bit registers, they need some ad-hoc
accessors on 32bit, specially given that VPENDBASER contains
a Valid bit, making the access a bit convoluted.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

On activation, a VPE is mapped using the VMAPP command, followed
by a VINVALL for a good measure. On deactivation, the VPE is
simply unmapped.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When creating a VM, the low level GICv4 code is responsible for:
- allocating each VPE a unique VPEID
- allocating a doorbell interrupt for each VPE
- allocating the pending tables for each VPE
- allocating the property table for the VM

This of course has to be reversed when the VM is brought down.

All of this is wired into the irq domain alloc/free methods.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the basic GICv4 VPE (vcpu in GICv4 parlance) infrastructure
(irqchip, irq domain) that is going to be populated in the following
patches.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When a VLPI is reconfigured (enabled, disabled, change in priority),
the full configuration byte must be written, and the caches invalidated.

Also, when using the irq_mask/irq_unmask methods, it is necessary
to disable the doorbell for that particular interrupt (by mapping it
to 1023) on top of clearing the Enable bit.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In order to let a VLPI being injected into a guest, the VLPI must
be mapped using the VMAPTI command. When moved to a different vcpu,
it must be moved with the VMOVI command.

These commands are issued via the irq_set_vcpu_affinity method,
making sure we unmap the corresponding host LPI first.

The reverse is also done when the VLPI is unmapped from the guest.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the skeleton irq_set_vcpu_affinity method that will be used
to configure VLPIs.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the new GICv4 ITS command definitions, most of them, being
defined in terms of their physical counterparts.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add a bunch of GICv4-specific data structures that will get used in
subsequent patches.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We're are going to need to change a bit more than just the enable
bit in the LPI property table in the future. So let's change the
LPI configuration funtion to take a set of bits to be cleared,
and a set of bits to be set.

This way, we'll be able to use it when a guest updates an LPI
property (priority, for example).
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we want to use 2-level tables for VCPUs, let's hack the device
table allocator in order to make it slightly more generic. It
will get reused in subsequent patches.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Rework LPI deallocation so that it can be reused by the v4 support
code.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Just as for the property table, let's move the pending table
allocation to a separate function.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The VCPU tables can be quite sparse as well, and it makes sense
to use indirect tables as well if possible.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Move the LPI property table allocation into its own function, as
this is going to be required for those associated with VMs in
the future.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Allow the pending state of an LPI to be set or cleared via
irq_set_irqchip_state.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Most ITS commands do operate on a collection object, and require
a SYNC command to be performed on that collection in order to
guarantee the execution of the first command.

With GICv4 ITS, another set of commands perform similar operations
on a VPE object, and a VSYNC operations must be executed to guarantee
their execution.

Given the similarities (post a command, perform a synchronization
operation on a sync object), it makes sense to reuse the same
mechanism for both class of commands.

Let's start with turning its_send_single_command into a huge macro
that performs the bulk of the work, and a set of helpers that
make this macro usable for the GICv3 ITS commands.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the probing code for the ITS VLPI support. This includes
configuring the ITS number if not supporting the single VMOVP
command feature.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The various LPI definitions are in the middle of the code, and
would be better placed at the beginning, given that we're going
to use some of them much earlier.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add helper functions that probe for VLPI and DirectLPI properties.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In order to discover the VLPI properties, we need to iterate over
the redistributor regions. As we already have code that does this,
let's factor it out and make it slightly more generic.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When assigning an interrupt to a vcpu, it is not unlikely that
the level of the hierarchy implementing irq_set_vcpu_affinity
is not the top level (think a generic MSI domain on top of a
virtualization aware interrupt controller).

In such a case, let's iterate over the hierarchy until we find
an irqchip implementing it.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Lee Jones <lee@kernel.org>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Acked-by: NEric Anholt <eric@anholt.net>
Acked-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NVladimir Zapolskiy <vz@mleia.com>
Acked-by: NMatthias Brugger <matthias.bgg@gmail.com>
Acked-by: NAlexandre Torgue <alexandre.torgue@st.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

UniPhier SoCs contain AIDET (ARM Interrupt Detector).  This is intended
to provide additional features that are not covered by GIC.  The main
purpose is to provide logic inverter to support low level and falling
edge trigger types for interrupt lines from on-board devices.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

wait_for_range_completion() is nicely busted when handling
wrapping of the command queue, leading to an early exit
instead of waiting for the command to have been executed.

Fortunately, the impact is pretty minor, as it only impair
the detection of an ITS that doesn't make any forward progress
for a whole second. And an ITS should *never* lock up.
Reported-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>