- 13 4月, 2013 1 次提交
-
-
由 Josef Bacik 提交于
While trying to track down a tree log replay bug I noticed that fsck was always complaining about nbytes not being right for our fsynced file. That is because the new fsync stuff doesn't wait for ordered extents to complete, so the inodes nbytes are not necessarily updated properly when we log it. So to fix this we need to set nbytes to whatever it is on the inode that is on disk, so when we replay the extents we can just add the bytes that are being added as we replay the extent. This makes it work for the case that we have the wrong nbytes or the case that we logged everything and nbytes is actually correct. With this I'm no longer getting nbytes errors out of btrfsck. Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 29 3月, 2013 1 次提交
-
-
由 Josef Bacik 提交于
A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 28 3月, 2013 8 次提交
-
-
由 Miao Xie 提交于
If we don't find the expected csum item, but find a csum item which is adjacent to the specified extent, we should return -EFBIG, or we should return -ENOENT. But btrfs_lookup_csum() return -EFBIG even the csum item is not adjacent to the specified extent. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
We reserve the space for csums only when we write data into a file, in the other cases, such as tree log, log replay, we don't do reservation, so we can use the reservation of the transaction handle just for the former. And for the latter, we should use the tree's own reservation. But the function - btrfs_csum_file_blocks() didn't differentiate between these two types of the cases, fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Wang Shilong 提交于
The function btrfs_find_all_roots is responsible to allocate memory for 'roots' and free it if errors happen,so the caller should not free it again since the work has been done. Besides,'tmp' is allocated after the function btrfs_find_all_roots, so we can return directly if btrfs_find_all_roots() fails. Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
A user reported a problem where he was getting early ENOSPC with hundreds of gigs of free data space and 6 gigs of free metadata space. This is because the global block reserve was taking up the entire free metadata space. This is ridiculous, we have infrastructure in place to throttle if we start using too much of the global reserve, so instead of letting it get this huge just limit it to 512mb so that users can still get work done. This allowed the user to complete his rsync without issues. Thanks Cc: stable@vger.kernel.org Reported-and-tested-by: NStefan Priebe <s.priebe@profihost.ag> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We need to hold the ordered_operations mutex while waiting on ordered extents since we splice and run the ordered extents list. We need to make sure anybody else who wants to wait on ordered extents does actually wait for them to be completed. This will keep us from bailing out of flushing in case somebody is already waiting on ordered extents to complete. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We are way over-reserving for unlink and rename. Rename is just some random huge number and unlink accounts for tree log operations that don't actually happen during unlink, not to mention the tree log doesn't take from the trans block rsv anyway so it's completely useless. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
Dave reported a warning when running xfstest 275. We have been leaking delalloc metadata space when our reservations fail. This is because we were improperly calculating how much space to free for our checksum reservations. The problem is we would sometimes free up space that had already been freed in another thread and we would end up with negative usage for the delalloc space. This patch fixes the problem by calculating how much space the other threads would have already freed, and then calculate how much space we need to free had we not done the reservation at all, and then freeing any excess space. This makes xfstests 275 no longer have leaked space. Thanks Cc: stable@vger.kernel.org Reported-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Jan Schmidt 提交于
When you take a snapshot, punch a hole where there has been data, then take another snapshot and try to send an incremental stream, btrfs send would give you EIO. That is because is_extent_unchanged had no support for holes being punched. With this patch, instead of returning EIO we just return 0 (== the extent is not unchanged) and we're good. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Cc: Alexander Block <ablock84@gmail.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 27 3月, 2013 1 次提交
-
-
由 Chris Mason 提交于
Btrfs uses page_mkwrite to ensure stable pages during crc calculations and mmap workloads. We call clear_page_dirty_for_io before we do any crcs, and this forces any application with the file mapped to wait for the crc to finish before it is allowed to change the file. With compression on, the clear_page_dirty_for_io step is happening after we've compressed the pages. This means the applications might be changing the pages while we are compressing them, and some of those modifications might not hit the disk. This commit adds the clear_page_dirty_for_io before compression starts and makes sure to redirty the page if we have to fallback to uncompressed IO as well. Signed-off-by: NChris Mason <chris.mason@fusionio.com> Reported-by: NAlexandre Oliva <oliva@gnu.org> cc: stable@vger.kernel.org
-
- 22 3月, 2013 5 次提交
-
-
由 Tsutomu Itoh 提交于
We should free leaf and root before returning from the error handling code. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Jan Schmidt 提交于
To resolve backrefs, ROOT_REPLACE operations in the tree mod log are required to be tied to at least one KEY_REMOVE_WHILE_FREEING operation. Therefore, those operations must be enclosed by tree_mod_log_write_lock() and tree_mod_log_write_unlock() calls. Those calls are private to the tree_mod_log_* functions, which means that removal of the elements of an old root node must be logged from tree_mod_log_insert_root. This partly reverts and corrects commit ba1bfbd5 (Btrfs: fix a tree mod logging issue for root replacement operations). This fixes the brand-new version of xfstest 276 as of commit cfe73f71. Cc: stable@vger.kernel.org Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Wang Shilong 提交于
Steps to reproduce: mkfs.btrfs <disk> mount <disk> <mnt> btrfs quota enable <mnt> btrfs sub create <mnt>/subv btrfs qgroup limit 10M <mnt>/subv fallocate --length 20M <mnt>/subv/data For the above example, fallocating will return successfully which is not expected, we try to fix it by doing qgroup reservation before fallocating. Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
If you restore a btrfs-image file system and try to mount that file system we'll panic. That's because btrfs-image restores and just makes one big chunk to envelope the whole disk, since they are really only meant to be messed with by our btrfs-progs. So fix up btrfs_rmap_block and the callers of it for mount so that we no longer panic but instead just return an error and fail to mount. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Now that we use bit operation to check fs_state, update btrfs_free_fs_root()'s checker, otherwise we get back to memory leak case. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 16 3月, 2013 1 次提交
-
-
由 Liu Bo 提交于
Users report that an extent map's list is still linked when it's actually going to be freed from cache. The story is that a) when we're going to drop an extent map and may split this large one into smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means that it's on the list to be logged, then the smaller ems split from it will also be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected. b) we'll keep ems from unlinking the list and freeing when they are flagged with EXTENT_FLAG_LOGGING, because the log code holds one reference. The end result is the warning, but the truth is that we set the flag EXTENT_FLAG_LOGGING only during fsync. So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one. Reported-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 15 3月, 2013 6 次提交
-
-
由 Liu Bo 提交于
Creating snapshot passes extent_root to commit its transaction, but it can lead to the warning of checking root for quota in the __btrfs_end_transaction() when someone else is committing the current transaction. Since we've recorded the needed root in trans_handle, just use it to get rid of the warning. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Wang Shilong 提交于
If one of qgroup fails to reserve firstly, we should return immediately, it is unnecessary to continue check. Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
The callers of lookup_inline_extent_info all handle getting an error back properly, so return an error if we have corruption instead of being a jerk and panicing. Still WARN_ON() since this is kind of crucial and I've been seeing it a bit too much recently for my taste, I think we're doing something wrong somewhere. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Eric Sandeen 提交于
Doing this would reliably fail with -EBUSY for me: # mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2 ... unable to open /dev/sdb2: Device or resource busy because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it. Using systemtap to track bdev gets & puts shows a kworker thread doing a blkdev put after mkfs attempts a get; this is left over from the unmount path: btrfs_close_devices __btrfs_close_devices call_rcu(&device->rcu, free_device); free_device INIT_WORK(&device->rcu_work, __free_device); schedule_work(&device->rcu_work); so unmount might complete before __free_device fires & does its blkdev_put. Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait until all blkdev_put()s are done, and the device is truly free once unmount completes. Cc: stable@vger.kernel.org Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Remove a useless function declaration Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
Using spinning case instead of blocking will result in better concurrency overall. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 07 3月, 2013 3 次提交
-
-
由 Chris Mason 提交于
The delayed inode code batches up changes to the btree in hopes of doing them in bulk. As the changes build up, processes kick off worker threads and wait for them to make progress. The current code kicks off an async work queue item for each delayed node, which creates a lot of churn. It also uses a fixed 1 HZ waiting period for the throttle, which allows us to build a lot of pending work and can slow down the commit. This changes us to watch a sequence counter as it is bumped during the operations. We kick off fewer work items and have each work item do more work. Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Ilya Dryomov 提交于
Raid56 merge (merge commit e942f883) had mistakenly removed a call to __cancel_balance(), which resulted in balance not cleaning up after itself after a successful finish. (Cleanup includes switching the state, removing the balance item and releasing mut_ex_op testnset lock.) Bring it back. Reported-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Chris Mason 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next into for-linus-3.9
-
- 06 3月, 2013 1 次提交
-
-
由 Chris Mason 提交于
Commit 24542bf7 changed preallocation of extents to cap the max size we try to allocate. It's a valid change, but the extent reservation code is also used by balance, and that can't tolerate a smaller extent being allocated. __btrfs_prealloc_file_range already has a min_size parameter, which is used by relocation to request a specific extent size. This commit adds an extra check to enforce that minimum extent size. Signed-off-by: NChris Mason <chris.mason@fusionio.com> Reported-by: NStefan Behrens <sbehrens@giantdisaster.de>
-
- 05 3月, 2013 10 次提交
-
-
由 Stefan Behrens 提交于
Commit 5ac00add added a testnset mutex and code that disallows running administrative tasks in parallel. It is prevented that the device add/delete/balance/replace/resize operations are started in parallel. By mistake, the defragmentation operation was included in the check for mutually exclusiveness as well. This is fixed with this commit. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
Only let one trans handle to wait for other handles, otherwise we will get ABBA issues. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
Btrfs balance can easily hit BUG_ON in these places, but we want to it bail out gracefully after we force the whole filesystem to readonly. So we use btrfs_std_error hook in place of BUG_ON. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
We can bail out from here gracefully instead of a cold BUG_ON. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
We've missed the 'free blocks' part on ENOMEM error. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
We first use btrfs_std_error hook to replace with BUG_ON, and we also need to cleanup what is left, including reloc roots rbtree and reloc roots list. Here we use a helper function to cleanup both rbtree and list, and since this function can also be used in the balance recover path, we also make the change as well to keep code simple. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Liu Bo 提交于
Add a check for NULL pointer to avoid invalid reference. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
If the async transaction commitment failed, we need close the current transaction handler, or the current transaction will be blocked to commit because of this orphan handler. We fix the problem by doing sync transaction commitment, that is to invoke btrfs_commit_transaction(). Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Miao Xie 提交于
There are several bugs at error path of create_snapshot() when the transaction commitment failed. - access the freed transaction handler. At the end of the transaction commitment, the transaction handler was freed, so we should not access it after the transaction commitment. - we were not aware of the error which happened during the snapshot creation if we submitted a async transaction commitment. - pending snapshot access vs pending snapshot free. when something wrong happened after we submitted a async transaction commitment, the transaction committer would cleanup the pending snapshots and free them. But the snapshot creators were not aware of it, they would access the freed pending snapshots. This patch fixes the above problems by: - remove the dangerous code that accessed the freed handler - assign ->error if the error happens during the snapshot creation - the transaction committer doesn't free the pending snapshots, just assigns the error number and evicts them before we unblock the transaction. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We need to inc the nlink of deleted entries when running replay so we can do the unlink on the fs_root and get everything cleaned up and then have the orphan cleanup do the right thing. The problem is inc_nlink complains about this, even thought it still does the right thing. So use set_nlink() if our i_nlink is 0 to keep users from seeing the warnings during log replay. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
- 03 3月, 2013 1 次提交
-
-
由 Geert Uytterhoeven 提交于
tilegx_defconfig: fs/btrfs/raid56.c: In function 'btrfs_alloc_stripe_hash_table': fs/btrfs/raid56.c:206:3: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] fs/btrfs/raid56.c:206:9: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/raid56.c:226:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 02 3月, 2013 2 次提交
-
-
由 Paul Gortmaker 提交于
We want to avoid module.h where posible, since it in turn includes nearly all of header space. This means removing it where it is not required, and using export.h where we are only exporting symbols via EXPORT_SYMBOL and friends. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Apparently when we do inline extents we allow the data to overlap the last chunk of the btrfs_file_extent_item, which means that we can possibly have a btrfs_file_extent_item that isn't actually as large as a btrfs_file_extent_item. This messes with us when we try to overwrite the extent when logging new extents since we expect for it to be the right size. To fix this just delete the item and try to do the insert again which will give us the proper sized btrfs_file_extent_item. This fixes a panic where map_private_extent_buffer would blow up because we're trying to write past the end of the leaf. Thanks, Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-