If the RTNL is held when we invoke flush_scheduled_work() we could
deadlock.  One such case is linkwatch, it is a work struct which tries
to grab the RTNL semaphore.

The most common case are net driver ->stop() methods.  The
simplest conversion is to instead use cancel_{delayed_}work_sync()
explicitly on the various work struct the driver uses.

This is an OK transformation because these work structs are doing
things like resetting the chip, restarting link negotiation, and so
forth.  And if we're bringing down the device, we're about to turn the
chip off and reset it anways.  So if we cancel a pending work event,
that's fine here.

Some drivers were working around this deadlock by using a msleep()
polling loop of some sort, and those cases are converted to instead
use cancel_{delayed_}work_sync() as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Compared to other places in the kernel, I think that this driver misuses
the function round_jiffies.
Signed-off-by: NChristophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NSylvain Munaut <tnt@246tNt.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The branches are dead code.  even when dev->flag IFF_MULTICAST (defined
0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to
0.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When creation of a new conntrack entry in ctnetlink fails after having
set up the NAT mappings, the conntrack has an extension area allocated
that is not getting properly destroyed when freeing the conntrack again.
This means the NAT extension is still in the bysource hash, causing a
crash when walking over the hash chain the next time:

BUG: unable to handle kernel paging request at 00120fbd
IP: [<c03d394b>] nf_nat_setup_info+0x221/0x58a
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP

Pid: 2795, comm: conntrackd Not tainted (2.6.26-rc5 #1)
EIP: 0060:[<c03d394b>] EFLAGS: 00010206 CPU: 1
EIP is at nf_nat_setup_info+0x221/0x58a
EAX: 00120fbd EBX: 00120fbd ECX: 00000001 EDX: 00000000
ESI: 0000019e EDI: e853bbb4 EBP: e853bbc8 ESP: e853bb78
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process conntrackd (pid: 2795, ti=e853a000 task=f7de10f0 task.ti=e853a000)
Stack: 00000000 e853bc2c e85672ec 00000008 c0561084 63c1db4a 00000000 00000000
       00000000 0002e109 61d2b1c3 00000000 00000000 00000000 01114e22 61d2b1c3
       00000000 00000000 f7444674 e853bc04 00000008 c038e728 0000000a f7444674
Call Trace:
 [<c038e728>] nla_parse+0x5c/0xb0
 [<c0397c1b>] ctnetlink_change_status+0x190/0x1c6
 [<c0397eec>] ctnetlink_new_conntrack+0x189/0x61f
 [<c0119aee>] update_curr+0x3d/0x52
 [<c03902d1>] nfnetlink_rcv_msg+0xc1/0xd8
 [<c0390228>] nfnetlink_rcv_msg+0x18/0xd8
 [<c0390210>] nfnetlink_rcv_msg+0x0/0xd8
 [<c038d2ce>] netlink_rcv_skb+0x2d/0x71
 [<c0390205>] nfnetlink_rcv+0x19/0x24
 [<c038d0f5>] netlink_unicast+0x1b3/0x216
 ...

Move invocation of the extension destructors to nf_conntrack_free()
to fix this problem.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10875Reported-and-Tested-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The message "nf_log_packet: can't log since no backend logging module loaded
in! Please either load one, or disable logging explicitly" was displayed for
each logged packet when no userspace application is listening to nflog events.
The message seems to warn for a problem with a kernel module missing but as
said before this is not the case. I thus propose to suppress the message (I
don't see any reason to flood the log because a user application has crashed.)
Signed-off-by: NEric Leblond <eric@inl.fr>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPV6_MULTICAST_HOPS, for example, is not valid for stream sockets.
Since they are virtually unavailable for stream sockets,
we should return ENOPROTOOPT instead of EINVAL.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Only 0 and 1 are valid for IPV6_MULTICAST_LOOP socket option,
and we should return an error of EINVAL otherwise, per RFC3493.

Based on patch from Shan Wei <shanwei@cn.fujitsu.com>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

When specifing the outgoing hop limit as ancillary data for sendmsg(),
the kernel doesn't check the integer hop limit value as specified in
[RFC-3542] section 6.3.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

1) We may have route lifetime larger than INT_MAX.
In that case we had wired value in lifetime.
Use INT_MAX if lifetime does not fit in s32.

2) Lifetime is valid iif RTF_EXPIRES is set.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Step 8.5 in RFC 4340 says for the newly cloned socket

           Initialize S.GAR := S.ISS,

but what in fact the code (minisocks.c) does is

           Initialize S.GAR := S.ISR,

which is wrong (typo?) -- fixed by the patch.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This fixes a bug in computing the inter-packet-interval t_ipi = s/X: 

 scaled_div32(a, b) uses u32 for b, but in "scaled_div32(s, X)" the type of the
 sending rate `X' is u64. Since X is scaled by 2^6, this truncates rates greater
 than 2^26 Bps (~537 Mbps).

Using full 64-bit division now.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This fixes a bug in the reverse lookup of p: given a value f(p), instead of p,
the function returned the smallest tabulated value f(p).

The smallest tabulated value of
	 
   10^6 * f(p) =  sqrt(2*p/3) + 12 * sqrt(3*p/8) * (32 * p^3 + p) 

for p=0.0001 is 8172. 

Since this value is scaled by 10^6, the outcome of this bug is that a loss
of 8172/10^6 = 0.8172% was reported whenever the input was below the table
resolution of 0.01%.

This means that the value was over 80 times too high, resulting in large spikes
of the initial loss interval, thus unnecessarily reducing the throughput.

Also corrected the printk format (%u for u32).
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This fixes an oversight from an earlier patch, ensuring that Ack Vectors
are not processed on request sockets.

The issue is that Ack Vectors must not be parsed on request sockets, since
the Ack Vector feature depends on the selection of the (TX) CCID. During the
initial handshake the CCIDs are undefined, and so RFC 4340, 10.3 applies:

 "Using CCID-specific options and feature options during a negotiation
  for the corresponding CCID feature is NOT RECOMMENDED [...]"

And it is not even possible: when the server receives the Request from the 
client, the CCID and Ack vector features are undefined; when the Ack finalising
the 3-way hanshake arrives, the request socket has not been cloned yet into a
full socket. (This order is necessary, since otherwise the newly created socket
would have to be destroyed whenever an option error occurred - a malicious
hacker could simply send garbage options and exploit this.)
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

This patch fixes the following sparse warnings:
 * nested min(max()) expression:
   net/dccp/ccids/ccid3.c:91:21: warning: symbol '__x' shadows an earlier one
   net/dccp/ccids/ccid3.c:91:21: warning: symbol '__y' shadows an earlier one
   
 * Declaration of function prototypes in .c instead of .h file, resulting in
   "should it be static?" warnings. 

 * Declared "struct dccpw" static (local to dccp_probe).
 
 * Disabled dccp_delayed_ack() - not fully removed due to RFC 4340, 11.3
   ("Receivers SHOULD implement delayed acknowledgement timers ...").

 * Used a different local variable name to avoid
   net/dccp/ackvec.c:293:13: warning: symbol 'state' shadows an earlier one
   net/dccp/ackvec.c:238:33: originally declared here

 * Removed unused functions `dccp_ackvector_print' and `dccp_ackvec_print'.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

In commit $(825de27d) (from 27th May, commit
message `dccp ccid-3: Fix "t_ipi explosion" bug'), the CCID-3 window counter
computation was fixed to cope with RTTs < 4 microseconds.

Such RTTs can be found e.g. when running CCID-3 over loopback. The fix removed
a check against RTT < 4, but introduced a divide-by-zero bug.

All steady-state RTTs in DCCP are filtered using dccp_sample_rtt(), which
ensures non-zero samples. However, a zero RTT is possible on initialisation,
when there is no RTT sample from the Request/Response exchange.

The fix is to use the fallback-RTT from RFC 4340, 3.4.

This is also better than just fixing update_win_count() since it allows other
parts of the code to always assume that the RTT is non-zero during the time
that the CCID is used.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>

Most legacy software do not like tables > 255 as rtm_table is u8
so tb_id is sent &0xff and it is possible to mismatch for example
table 510 with table 254 (main).

This patch introduces RT_TABLE_COMPAT=252 so the code uses it if
tb_id > 255. It makes such old applications happy, new
ones are still able to use RTA_TABLE to get a proper table id.
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_close() must be called holding the RTNL.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Using vendor magic to force the PHY into power save mode breaks
suspend.  It isn't needed anyway, so remove it.
Tested-by: NAvuton Olrich <avuton@gmail.com>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

In case the xmit function drop out with an error, we have to wake
the netdevice queue to start another xmit.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Prepare-function to call s390dbf was wrong handling variable arguments.
This worked as macro but not as function any more.
Now using va_list processing.
Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Remove unnecessary messages. Write important debug information to
s390dbf.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Get the devno from the ccw device via ccw_device_get_id() instead
of parsing the bus_id.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The ip event handler may present us non qeth network interfaces.
Add qeth card pointer check.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

virtio_net uses a timer to free old transmitted packets, rather than
leaving callbacks enabled all the time.  If the host promises to
always notify us when the transmit ring is empty, we can free packets
at that point and avoid the timer.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

virtio_net currently only frees old transmit skbs just
before queueing new ones. If the queue is full, it then
enables interrupts and waits for notification that more
work has been performed.

However, a side-effect of this scheme is that there are
always xmit skbs left dangling when no new packets are
sent, against the Documentation/networking/driver.txt
guideline:

  "... it is not allowed for your TX mitigation scheme
   to let TX packets "hang out" in the TX ring unreclaimed
   forever if no new TX packets are sent."

Add a timer to ensure that any time we queue new TX
skbs, we will shortly free them again.

This fixes an easily reproduced hang at shutdown where
iptables attempts to unload nf_conntrack and nf_conntrack
waits for an skb it is tracking to be freed, but virtio_net
never frees it.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

hdr->csum_start is the offset from the start of the ethernet
header to the transport layer checksum field. skb->csum_start
is the offset from skb->head.

skb_partial_csum_set() assumes that skb->data points to the
ethernet header - i.e. it computes skb->csum_start by adding
the headroom to hdr->csum_start.

Since eth_type_trans() skb_pull()s the ethernet header,
skb_partial_csum_set() should be called before
eth_type_trans().

(Without this patch, GSO packets from a guest to the world outside the
host are corrupted).
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

eHEA has to call firmware functions in order to change the mac address
of a logical port. This patch checks if the logical port is up
when calling the register / deregister mac address calls. If the port
is down these firmware calls would fail and are therefore not executed.
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

RX queue flush can fail if traffic continues to arrive.  Recover by
performing an invisible reset.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes the following build error:

<--  snip  -->

...
  Building modules, stage 2.
  MODPOST 1203 modules
ERROR: "lance_open" [drivers/net/mvme147.ko] undefined!
ERROR: "lance_close" [drivers/net/mvme147.ko] undefined!
ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined!
ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined!
ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Define names were accidently transposed.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add a workaround for lost MSI interrupts.  There is a race condition in
the HW in which future interrupts could be missed.  The workaround is to
toggle the MSI irq mask.

Added cleanup based on comments from Andrew Morton.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When pfkey has no km listeners, it still does a lot of work
before finding out there aint nobody out there.
If a tree falls in a forest and no one is around to hear it, does it make
a sound? In this case it makes a lot of noise:
With this short-circuit adding 10s of thousands of SAs using
netlink improves performance by ~10%.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>