Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 22 4月, 2015 5 次提交
  3. 19 4月, 2015 5 次提交
  5. 18 4月, 2015 10 次提交
    • K
      config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected · a6dfa128
      由 Konrad Rzeszutek Wilk 提交于 
      A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.
Reported-by: NIan Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPrashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a6dfa128
    • I
      perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() · 0c99241c
      由 Ingo Molnar 提交于 
      Dan Carpenter reported that pt_event_add() has buggy
error handling logic: it returns 0 instead of -EBUSY when
it fails to start a newly added event.

Furthermore, the control flow in this function is messy,
with cleanup labels mixed with direct returns.

Fix the bug and clean up the code by converting it to
a straight fast path for the regular non-failing case,
plus a clear sequence of cascading goto labels to do
all cleanup.

NOTE: I materially changed the existing clean up logic in the
pt_event_start() failure case to use the direct
perf_aux_output_end() path, not pt_event_del(), because
perf_aux_output_end() is enough here.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150416103830.GB7847@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      0c99241c
    • C
      tile: nohz: warn if nohz_full uses hypervisor shared cores · 128f3cb9
      由 Chris Metcalf 提交于 
      The "hypervisor shared" cores are ones that the Tilera hypervisor
uses to receive interrupts to manage hypervisor-owned devices.
It's a bad idea to try to use those cores with nohz_full, since
they will get interrupted unpredictably -- and invisibly to Linux
tracing tools, since the interrupts are delivered at a higher
privilege level to the Tilera hypervisor.

Generate a clear warning at boot up that this doesn't end well
for the nohz_full cores in question.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
      128f3cb9
    • T
      tile: ftrace: fix function_graph tracer issues · 437d3e12
      由 Tony Lu 提交于 
      - Add support for ARCH_SUPPORTS_FTRACE_OPS
- Replace the instruction in ftrace_call with the bundle {move r10, lr;
jal ftrace_stub}, so that the lr contains the right value after returning
from ftrace_stub.  An alternative fix might be to leave the instruction
in ftrace_call alone when it is being updated with ftrace_stub.
Signed-off-by: NTony Lu <zlu@ezchip.com>
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
      437d3e12
    • C
      tile: map data region shadow of kernel as R/W · a84f2423
      由 Chris Metcalf 提交于 
      This is necessary for things like reading /proc/kcore, doing ftrace,
etc.  It happens by default when using huge pages to map the kernel
data, but not when using small pages.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
      a84f2423
    • C
      tile: support CONTEXT_TRACKING and thus NOHZ_FULL · 49e4e156
      由 Chris Metcalf 提交于 
      Add the TIF_NOHZ flag appropriately.

Add call to user_exit() on entry to do_work_pending() and on entry
to syscalls via do_syscall_trace_enter(), and also the top of
do_syscall_trace_exit() just because it's done in x86.

Add call to user_enter() at the bottom of do_work_pending() once we
have no more work to do before returning to userspace.

Wrap all the trap code in exception_enter() / exception_exit().
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
      49e4e156
    • C
      tile: support arch_irq_work_raise · b340c656
      由 Chris Metcalf 提交于 
      Tile includes a hypervisor hook to deliver messages to arbitrary
tiles, so we can use that to raise an interrupt as soon as
possible on our own core.  Unfortunately the Tilera hypervisor
disabled that support on principle in previous releases, but
it will be available in MDE 4.3.4 and later.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
      b340c656
    • C
      arch: tile: fix null pointer dereference on pt_regs pointer · 9088616f
      由 Colin Ian King 提交于 
      Cppcheck reports the following issue:
[arch/tile/kernel/stack.c:116]: (error) Possible null
  pointer dereference: p

In this case, on reporting on an odd fault, p is set to NULL
and immediately afterwords p is dereferenced iff
!kbt->profile is false.  Rather than doing this check just
return NULL rather than falling through to the potential
null pointer dereference (since the original intentional
outcome would be to return NULL anyhow) for this odd fault
case.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> [tweaked lightly]
      9088616f
    • D
      tile/elf: reorganize notify_exec() · 5a3b4e80
      由 Davidlohr Bueso 提交于 
      In the future mm->exe_file will be done without mmap_sem
serialization, thus isolate and reorganize the tile elf
code to make the transition easier. Good users will, make
use of the more standard get_mm_exe_file(), requiring only
holding the mmap_sem to read the value, and relying on reference
counting to make sure that the exe file won't dissappear
underneath us.

The visible effects of this patch are:

   o We now take and drop the mmap_sem more often. Instead of
     just in arch_setup_additional_pages(), we also do it in:

     1) get_mm_exe_file()
     2) to get the mm->vm_file and notify the simulator.

    [Note that 1) will disappear once we change the locking
     rules for exe_file.]

   o We avoid getting a free page and doing d_path() while
     holding the mmap_sem. This requires reordering the checks.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
      5a3b4e80
    • C
      tile: use si_int instead of si_ptr for compat_siginfo · 89067c2d
      由 Chris Metcalf 提交于 
      To be compatible with the generic get_compat_sigevent(), the
copy_siginfo_to_user32() and thus copy_siginfo_from_user32()
have to use si_int instead of si_ptr.  Using si_ptr means that
for the case of ILP32 compat code running in big-endian mode,
we would end up copying the high 32 bits of the pointer value
into si_int instead of the desired low 32 bits.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
      89067c2d
  7. 17 4月, 2015 18 次提交
  9. 16 4月, 2015 2 次提交
    • O
      x86/ptrace: Fix the TIF_FORCED_TF logic in handle_signal() · fd0f86b6
      由 Oleg Nesterov 提交于 
      When the TIF_SINGLESTEP tracee dequeues a signal,
handle_signal() clears TIF_FORCED_TF and X86_EFLAGS_TF but
leaves TIF_SINGLESTEP set.

If the tracer does PTRACE_SINGLESTEP again, enable_single_step()
sets X86_EFLAGS_TF but not TIF_FORCED_TF.  This means that the
subsequent PTRACE_CONT doesn't not clear X86_EFLAGS_TF, and the
tracee gets the wrong SIGTRAP.

Test-case (needs -O2 to avoid prologue insns in signal handler):

	#include <unistd.h>
	#include <stdio.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <sys/user.h>
	#include <assert.h>
	#include <stddef.h>

	void handler(int n)
	{
		asm("nop");
	}

	int child(void)
	{
		assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
		signal(SIGALRM, handler);
		kill(getpid(), SIGALRM);
		return 0x23;
	}

	void *getip(int pid)
	{
		return (void*)ptrace(PTRACE_PEEKUSER, pid,
					offsetof(struct user, regs.rip), 0);
	}

	int main(void)
	{
		int pid, status;

		pid = fork();
		if (!pid)
			return child();

		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGALRM);

		assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0);
		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert((getip(pid) - (void*)handler) == 0);

		assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0);
		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
		assert((getip(pid) - (void*)handler) == 1);

		assert(ptrace(PTRACE_CONT, pid, 0,0) == 0);
		assert(wait(&status) == pid);
		assert(WIFEXITED(status) && WEXITSTATUS(status) == 0x23);

		return 0;
	}

The last assert() fails because PTRACE_CONT wrongly triggers
another single-step and X86_EFLAGS_TF can't be cleared by
debugger until the tracee does sys_rt_sigreturn().

Change handle_signal() to do user_disable_single_step() if
stepping, we do not need to preserve TIF_SINGLESTEP because we
are going to do ptrace_notify(), and it is simply wrong to leak
this bit.

While at it, change the comment to explain why we also need to
clear TF unconditionally after setup_rt_frame().

Note: in the longer term we should probably change
setup_sigcontext() to use get_flags() and then just remove this
user_disable_single_step().  And, the state of TIF_FORCED_TF can
be wrong after restore_sigcontext() which can set/clear TF, this
needs another fix.

This fix fixes the 'single_step_syscall_32' testcase in
the x86 testsuite:

Before:

	~/linux/tools/testing/selftests/x86> ./single_step_syscall_32
	[RUN]   Set TF and check nop
	[OK]    Survived with TF set and 9 traps
	[RUN]   Set TF and check int80
	[OK]    Survived with TF set and 9 traps
	[RUN]   Set TF and check a fast syscall
	[WARN]  Hit 10000 SIGTRAPs with si_addr 0xf7789cc0, ip 0xf7789cc0
	Trace/breakpoint trap (core dumped)

After:

	~/linux/linux/tools/testing/selftests/x86> ./single_step_syscall_32
	[RUN]   Set TF and check nop
	[OK]    Survived with TF set and 9 traps
	[RUN]   Set TF and check int80
	[OK]    Survived with TF set and 9 traps
	[RUN]   Set TF and check a fast syscall
	[OK]    Survived with TF set and 39 traps
	[RUN]   Fast syscall with TF cleared
	[OK]    Nothing unexpected happened
Reported-by: NEvan Teran <eteran@alum.rit.edu>
Reported-by: NPedro Alves <palves@redhat.com>
Tested-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ Added x86 self-test info. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      fd0f86b6
    • J
      s390: remove use of seq_printf return value · c2f0b61d
      由 Joe Perches 提交于 
      The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c2f0b61d