- 14 9月, 2012 2 次提交
-
-
由 Karsten Keil 提交于
It is a bad idea to hold a spinlock and call flush_work_sync. Move the workqueue cleanup outside the spinlock and use cancel_work_sync, on closing the channel this seems to be the more correct function. Remove the never used and constant return value of mISDN_freebchannel. Signed-off-by: NKarsten Keil <keil@b1-systems.de> Cc: <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf由 David S. Miller 提交于
Pablo Neira Ayuso say: ==================== The following patchset contains four updates for your net tree, they are: * Fix crash on timewait sockets, since the TCP early demux was added, in nfnetlink_log, from Eric Dumazet. * Fix broken syslog log-level for xt_LOG and ebt_log since printk format was converted from <.> to a 2 bytes pattern using ASCII SOH, from Joe Perches. * Two security fixes for the TCP connection tracking targeting off-path attacks, from Jozsef Kadlecsik. The problem was discovered by Jan Wrobel and it is documented in: http://mixedbit.org/reflection_scan/reflection_scan.pdf. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 9月, 2012 2 次提交
-
-
由 Joe Perches 提交于
auto75914331@hushmail.com reports that iptables does not correctly output the KERN_<level>. $IPTABLES -A RULE_0_in -j LOG --log-level notice --log-prefix "DENY in: " result with linux 3.6-rc5 Sep 12 06:37:29 xxxxx kernel: <5>DENY in: IN=eth0 OUT= MAC=....... result with linux 3.5.3 and older: Sep 9 10:43:01 xxxxx kernel: DENY in: IN=eth0 OUT= MAC...... commit 04d2c8c8 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern") updated the syslog header style but did not update netfilter uses. Do so. Use KERN_SOH and string concatenation instead of "%c" KERN_SOH_ASCII as suggested by Eric Dumazet. Signed-off-by: NJoe Perches <joe@perches.com> cc: auto75914331@hushmail.com Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric Dumazet 提交于
Its possible to setup a bad cbq configuration leading to an infinite loop in cbq_classify() DEV_OUT=eth0 ICMP="match ip protocol 1 0xff" U32="protocol ip u32" DST="match ip dst" tc qdisc add dev $DEV_OUT root handle 1: cbq avpkt 1000 \ bandwidth 100mbit tc class add dev $DEV_OUT parent 1: classid 1:1 cbq \ rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV_OUT parent 1: prio 3 $U32 \ $ICMP $DST 192.168.3.234 flowid 1: Reported-by: NDenys Fedoryschenko <denys@visp.net.lb> Tested-by: NDenys Fedoryschenko <denys@visp.net.lb> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 9月, 2012 5 次提交
-
-
由 Pierre Sauter 提交于
HP un2430 is a Gobi 3000 device. It was mistakenly treated as Gobi 1000 in patch b9f90eb2. I own this device and qmi_wwan works again with this fix. Signed-off-by: NPierre Sauter <pierre.sauter@gmail.com> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix net/core/sock.c build error when CONFIG_INET is not enabled: net/built-in.o: In function `sock_edemux': (.text+0xd396): undefined reference to `inet_twsk_put' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Commit 36a12119 (netprio_cgroup.h: dont include module.h from other includes) made the following build error on ixp4xx_hss pop up: CC [M] drivers/net/wan/ixp4xx_hss.o drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' before string constant make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 This was previously hidden because ixp4xx_hss includes linux/hdlc.h which includes linux/netdevice.h which includes linux/netprio_cgroup.h which used to include linux/module.h. The real issue was actually present since the initial commit that added this driver since it uses macros from linux/module.h without including this file. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennart Sorensen 提交于
I discovered I couldn't get sierra_net to work on a powerpc. Turns out the firmware attribute check assumes the system is little endian and hence fails because the attributes is a 16 bit value. Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2012 2 次提交
-
-
由 Jozsef Kadlecsik 提交于
We spare nothing by not validating the sequence number of dataless ACK packets and enabling it makes harder off-path attacks. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jozsef Kadlecsik 提交于
Clients should not send such packets. By accepting them, we open up a hole by wich ephemeral ports can be discovered in an off-path attack. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 09 9月, 2012 1 次提交
-
-
由 Chema Gonzalez 提交于
In the current rxhash calculation function, while the sorting of the ports/addrs is coherent (you get the same rxhash for packets sharing the same 4-tuple, in both directions), ports and addrs are sorted independently. This implies packets from a connection between the same addresses but crossed ports hash to the same rxhash. For example, traffic between A=S:l and B=L:s is hashed (in both directions) from {L, S, {s, l}}. The same rxhash is obtained for packets between C=S:s and D=L:l. This patch ensures that you either swap both addrs and ports, or you swap none. Traffic between A and B, and traffic between C and D, get their rxhash from different sources ({L, S, {l, s}} for A<->B, and {L, S, {s, l}} for C<->D) The patch is co-written with Eric Dumazet <edumazet@google.com> Signed-off-by: NChema Gonzalez <chema@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 9月, 2012 8 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem John W. Linville says: ==================== Please pull these fixes intended for 3.6. There are more commits here than I would like -- I got a bit behind while I was stalking Steven Rostedt in San Diego last week... I'll slow it down after this! There are a couple of pulls here. One is from Johannes: "Please pull (according to the below information) to get a few fixes. * a fix to properly disconnect in the driver when authentication or association fails * a fix to prevent invalid information about mesh paths being reported to userspace * a memory leak fix in an nl80211 error path" The other comes via Gustavo: "A few updates for the 3.6 kernel. There are two btusb patches to add more supported devices through the new USB_VENDOR_AND_INTEFACE_INFO() macro and another one that add a new device id for a Sony Vaio laptop, one fix for a user-after-free and, finally, two patches from Vinicius to fix a issue in SMP pairing." Along with those... Arend van Spriel provides a fix for a use-after-free bug in brcmfmac. Daniel Drake avoids a hang by not trying to touch the libertas hardware duing suspend if it is already powered-down. Felix Fietkau provides a batch of ath9k fixes that adress some potential problems with power settings, as well as a fix to avoid a potential interrupt storm. Gertjan van Wingerde provides a register-width fix for rt2x00, and a rt2x00 fix to prevent incorrectly detecting the rfkill status. He also provides a device ID patch. Hante Meuleman gives us three brcmfmac fixes, one that properly initializes a command structure, one that fixes a race condition that could lose usb requests, and one that removes some log spam. Marc Kleine-Budde offers an rt2x00 fix for a voltage setting on some specific devices. Mohammed Shafi Shajakhan sent an ath9k fix to avoid a crash related to using timers that aren't allocated when 2 wire bluetooth coexistence hardware is in use. Sergei Poselenov changes rt2800usb to do some validity checking for received packets, avoiding crashes on an ARM Soc. Stone Piao gives us an mwifiex fix for an incorrectly set skb length value for a command buffer. All of these are localized to their specific drivers, and relatively small. The power-related patches from Felix are bigger than I would like, but I merged them in consideration of their isolation to ath9k and the sensitive nature of power settings in wireless devices. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
It doesn't seem this spinlock was properly initialized. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In UDP recvmsg(), we miss an increase of UDP_MIB_INERRORS if the copy of skb to userspace failed for whatever reason. Reported-by: NShawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
If mlx4_cmd_init() failed, the init_one function returned success, although no resources were opened. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aviad Yehezkel 提交于
The order of operations was wrong on the teardown flow. Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aviad Yehezkel 提交于
The search for promisc entries was always done on the first port, While the addition is done on the correct port. This lead to resource leackage of promisc entries on the second port and brought to a state where we could no longer enter to promiscuous mode after enough iterations of "ifconfig promisc" on the second port. Fix that by using the correct port when searching. Reported-by: NMarcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2012 20 次提交
-
-
由 Eric Dumazet 提交于
Sami Farin reported crashes in xt_LOG because it assumes skb->sk is a full blown socket. Since (41063e9d ipv4: Early TCP socket demux), we can have skb->sk pointing to a timewait socket. Same fix is needed in nfnetlink_log. Diagnosed-by: NFlorian Westphal <fw@strlen.de> Reported-by: NSami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Santiago Leon 提交于
This patch fixes a bug found by Nish Aravamudan (https://lkml.org/lkml/2012/5/15/220) where the driver is not following the spec (it is not aligning the rx buffer on a 16-byte boundary) and the hypervisor aborts the registration, making the device unusable. The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461) to replace the kmalloc+map for a single call to dma_alloc_coherent() because that function always aligns to a 16-byte boundary. The stable trees will run into this bug whenever the rx buffer kmalloc call returns something not aligned on a 16-byte boundary. Cc: <stable@vger.kernel.org> Signed-off-by: NSantiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
commit 144d56e9 ("tcp: fix possible socket refcount problem") is missing the IPv6 part. As tcp_release_cb is shared by both protocols we should hold sock reference for the TCP_MTU_REDUCED_DEFERRED bit. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== this patch is for the v3.6 release cycle. Benoît Locher fixed a repeated frame bug in the mcp251x driver. He implemented the workaround suggested by the errata sheet. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Drake 提交于
When the interface is down, the hardware is powered off. However, the suspend handler currently tries to send host sleep commands (when wakeup params are set) in this configuration, causing a system hang when going into suspend (the commands will never complete). Avoid this by detecting this situation and simply returning from the suspend handler without doing anything special. Signed-off-by: NDaniel Drake <dsd@laptop.org> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sergei Poselenov 提交于
On our system (ARM Cortex-M3 SOC running linux-2.6.33) frequent crashes were observed in the rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone() so that the bad packet condition would be noticed. The fix was tested on the latest compat-wireless-3.5.1-1-snpc. Cc: stable@vger.kernel.org Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
We need to program the rfkill switch GPIO pin direction to input at device initialization time, not only when the interface is brought up. Doing this only when the interface is brought up could lead to rfkill detecting the switch is turned on erroneously and inability to create the interface and bringing it up. Reported-and-tested-by: NAndreas Messer <andi@bastelmap.de> Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: NIvo Van Doorn <ivdoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
The register is 16 bits wide, not 32. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: NIvo Van Doorn <ivdoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
This is an RT3572 based device. Signed-off-by: NMaximilian Engelhardt <maxi@daemonizer.de> Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: NIvo Van Doorn <ivdoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
The function brcmf_cfg80211_get_station requests the RSSI from the device. The complete structure used needs to be cleared before sending the request to firmware. Otherwise the request fails filling the logs with "Could not get rssi (-2)" messages. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
On both rx and tx there is was a race condition on the queueing of usb requests. When for example frame gets submitted it is possible that complete function gets called even before usb_submit_urb() returns. As a result it is possible that usb requests get losts, which was noticed on OMAP4 pandaboard platform. This patch fixes the race condition. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
URB_ZERO_PACKET should only be set or bulk OUT and this condition is checked with a WARN_ON in usb_submit_urb(). This patch fixes brcmfmac to get rid of this warning filling the logs. Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
The USB part of the brcmfmac did a dev_kfree_skb() that resulted in a warning in net/core/skbuff.c: Jul 11 04:53:33 lb-bun-10 kernel: [53282.667745] WARNING: at net/core/skbuff.c:490 skb_release_head_state+0xcc/0xe0() The brcmutil modules provides brcmu_pkt_buf_free_skb() which takes the context into account. This patch makes use of this function instead of dev_kfree_skb(). Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohammed Shafi Shajakhan 提交于
Generic timers for BTCOEX functionality is applicable only for 3 WIRE BTCOEX (and MCI) chipsets. Hence btcoex->no_stomp_timer is allocated only 3 WIRE btcoex chipsets and in all the other cases its NULL. Make sure we stop the generic timer only if 'btcoex->hw_timer_enabled' is true(only if its up and running) Fixes the following crash [68757.020454] BUG: unable to handle kernel NULL pointer dereference at 0000000c [68757.020916] IP: [<f9b055c3>] ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.021251] *pde = 00000000 [68757.024384] EIP: 0060:[<f9b055c3>] EFLAGS: 00010082 CPU: 0 [68757.024384] EIP is at ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.024384] EAX: d32d0000 EBX: d32d0000 ECX: 00000000 EDX: 00000000 [68757.024384] ESI: e67c24c0 EDI: 00000296 EBP: e137be2c ESP: e137be20 [68757.024384] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [68757.024384] CR0: 8005003b CR2: 0000000c CR3: 00b99000 CR4: 000407d0 [68757.024384] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [68757.024384] DR6: ffff0ff0 DR7: 00000400 [68757.024384] Process kworker/u:2 (pid: 8917, ti=e137a000 task=ea7a6860 task.ti=e137a000) [68757.024384] Stack: [68757.024384] c06c4676 d32d0000 e67c24c0 e137be38 f81c9590 e67c1ca0 e137be40 f81c95d9 [68757.024384] e137be64 f81cd1c5 00000246 00000002 d32d0000 e67c05e0 e67c1ca0 e67c05e0 [68757.024384] 00000000 e137beac f81cdfa0 e137be84 00000246 00000246 e67c1ca0 e67c1ca0 [68757.024384] Call Trace: [68757.024384] [<c06c4676>] ? _raw_spin_lock_irqsave+0x86/0xa0 [68757.024384] [<f81c9590>] ath9k_gen_timer_stop+0x10/0x40 [ath9k] [68757.024384] [<f81c95d9>] ath9k_btcoex_stop_gen_timer+0x19/0x20 [ath9k] [68757.024384] [<f81cd1c5>] ath9k_ps_restore+0x85/0x110 [ath9k] [68757.024384] [<f81cdfa0>] ath9k_config+0x220/0x520 [ath9k] [68757.024384] [<f81cd47d>] ? ath9k_flush+0x15d/0x1b0 [ath9k] [68757.024384] [<f85c7ca5>] ieee80211_hw_config+0x135/0x2c0 [mac80211] [68757.024384] [<f860e3c8>] ieee80211_dynamic_ps_enable_work+0x198/0x5f0 [mac80211] Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: NMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
This feature had been disabled in ath9k because the code to support it was incomplete, but now the code is in sync with the internal QCA codebase, so it's time to enable it. On many newer devices, the calibration is assumed to be done with PA linearization enabled. Tests with a particular AR933x device showed that the signal emitted at full power was highly distorted and unreliable with PA linearization disabled. With this patch, the signal becomes clear and stability is improved. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Before PAPRD training can run, the card needs to have sent a packet for thermal calibration. Sending a dummy packet with the PAPRD training flag set causes a crash under some circumstance. Fix the code by replacing the dummy tx with a delay that waits for a real packet tx to have occurred. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Support for it is incomplete Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Re-train if the calibrated PA linearization curve is out of bounds (affects AR933x and AR9485). Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
That predistortion type is not supported Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
The interrupt is no longer handling it. While it shouldn't fire (wraparound is highly unlikely), the consequences would be fatal (interrupt storm). Disable the interrupt to prevent that from happening. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-