- 20 1月, 2014 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: NGert Doering <gert@space.net> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2014 2 次提交
-
-
由 Eric Dumazet 提交于
Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Hurrle 提交于
This is a follow-up patch to f3d33426 ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: NSteffen Hurrle <steffen@hurrle.net> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 3 次提交
-
-
由 Eric Dumazet 提交于
This patch : 1) Remove a dst leak if DST_NOCACHE was set on dst Fix this by holding a reference only if dst really cached. 2) Remove a lockdep warning in __tunnel_dst_set() This was reported by Cong Wang. 3) Remove usage of a spinlock where xchg() is enough 4) Remove some spurious inline keywords. Let compiler decide for us. Fixes: 7d442fab ("ipv4: Cache dst in tunnels") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
Because the tcp-metrics is an RCU-list, it may be that two soft-interrupts are inside __tcp_get_metrics() for the same destination-IP at the same time. If this destination-IP is not yet part of the tcp-metrics, both soft-interrupts will end up in tcpm_new and create a new entry for this IP. So, we will have two tcp-metrics with the same destination-IP in the list. This patch checks twice __tcp_get_metrics(). First without holding the lock, then while holding the lock. The second one is there to confirm that the entry has not been added by another soft-irq while waiting for the spin-lock. Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.) Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florent Fourcot 提交于
This patch is following the commit b903d324 (ipv6: tcp: fix TCLASS value in ACK messages sent from TIME_WAIT). For the same reason than tclass, we have to store the flow label in the inet_timewait_sock to provide consistency of flow label on the last ACK. Signed-off-by: NFlorent Fourcot <florent.fourcot@enst-bretagne.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
Recent commit 438e38fa ("gre_offload: statically build GRE offloading support") added new module_init/module_exit calls to the gre_offload.c file. The file is obj-y and can't be anything other than built-in. Currently it can never be built modular, so using module_init as an alias for __initcall can be somewhat misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. We also make the inclusion explicit. Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of device_initcall directly in this change means that the runtime impact is zero -- it will remain at level 6 in initcall ordering. As for the module_exit, rather than replace it with __exitcall, we simply remove it, since it appears only UML does anything with those, and even for UML, there is no relevant cleanup to be done here. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2014 4 次提交
-
-
由 Eric Dumazet 提交于
tcp_gso_segment() and tcp_gro_receive() no longer need to be exported. IPv4 and IPv6 offloads are statically linked. Note that tcp_gro_complete() is still used by bnx2x, unfortunately. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Bob Falken reported that after 4G packets, multicast forwarding stopped working. This was because of a rule reference counter overflow which freed the rule as soon as the overflow happend. This patch solves this by adding the FIB_LOOKUP_NOREF flag to fib_rules_lookup calls. This is safe even from non-rcu locked sections as in this case the flag only implies not taking a reference to the rule, which we don't need at all. Rules only hold references to the namespace, which are guaranteed to be available during the call of the non-rcu protected function reg_vif_xmit because of the interface reference which itself holds a reference to the net namespace. Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables") Fixes: d1db275d ("ipv6: ip6mr: support multiple tables") Reported-by: NBob Falken <NetFestivalHaveFun@gmx.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aruna-Hewapathirane 提交于
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: NAruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
We still need this notifier even when we don't config PROC_FS. It should be rare to have a kernel without PROC_FS, so just for completeness. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2014 5 次提交
-
-
由 Neal Cardwell 提交于
Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT), and for such sockets the tw_substate field holds the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2. This brings the inet_diag state-matching code in line with the field it uses to populate idiag_state. This is also analogous to the info exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state and get_timewait4_sock() exports tw->tw_substate. Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi state time-wait" would also return sockets in state TCP_FIN_WAIT2. This is an old bug that predates 05dbc7b5 ("tcp/dccp: remove twchain"). Signed-off-by: NNeal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Simplify the GRE header length calculation in gre_gso_segment(). Switch to an approach that is simpler, faster, and more general. The new approach will continue to be correct even if we add support for the optional variable-length routing info that may be present in a GRE header. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: net/ipv4/gre_offload.c:253:5: warning: symbol 'gre_gro_complete' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors to be honored by protocols which do more stringent validation on the ICMP's packet payload. This knob is useful for people who e.g. want to run an unmodified DNS server in a namespace where they need to use pmtu for TCP connections (as they are used for zone transfers or fallback for requests) but don't want to use possibly spoofed UDP pmtu information. Currently the whitelisted protocols are TCP, SCTP and DCCP as they check if the returned packet is in the window or if the association is valid. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Suggested-by: NFlorian Weimer <fweimer@redhat.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
While forwarding we should not use the protocol path mtu to calculate the mtu for a forwarded packet but instead use the interface mtu. We mark forwarded skbs in ip_forward with IPSKB_FORWARDED, which was introduced for multicast forwarding. But as it does not conflict with our usage in unicast code path it is perfect for reuse. I moved the functions ip_sk_accept_pmtu, ip_sk_use_pmtu and ip_skb_dst_mtu along with the new ip_dst_mtu_maybe_forward to net/ip.h to fix circular dependencies because of IPSKB_FORWARDED. Because someone might have written a software which does probe destinations manually and expects the kernel to honour those path mtus I introduced a new per-namespace "ip_forward_use_pmtu" knob so someone can disable this new behaviour. We also still use mtus which are locked on a route for forwarding. The reason for this change is, that path mtus information can be injected into the kernel via e.g. icmp_err protocol handler without verification of local sockets. As such, this could cause the IPv4 forwarding path to wrongfully emit fragmentation needed notifications or start to fragment packets along a path. Tunnel and ipsec output paths clear IPCB again, thus IPSKB_FORWARDED won't be set and further fragmentation logic will use the path mtu to determine the fragmentation size. They also recheck packet size with help of path mtu discovery and report appropriate errors. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: John Heffner <johnwheffner@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 5 次提交
-
-
由 Christoph Paasch 提交于
We want to be able to get/del tcp-metrics based on the src IP. This patch adds the necessary parsing of the netlink attribute and if the source address is set, it will match on this one too. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
As we now can have multiple entries per destination-IP, the "ip tcp_metrics delete address ADDRESS" command deletes all of them. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
This patch adds a new netlink attribute for the source-IP and appends it to the netlink reply. Now, iproute2 can have access to the source-IP. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
We add the source-address to the tcp-metrics, so that different metrics will be used per source/destination-pair. We use the destination-hash to store the metric inside the hash-table. That way, deleting and dumping via "ip tcp_metrics" is easy. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
As we will add also the source-address, we rename all accesses to the tcp-metrics address to use "daddr". Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2014 6 次提交
-
-
由 Pablo Neira Ayuso 提交于
We have to unregister chain type if this fails to register netns. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: net/ipv4/ip_tunnel.c:116:18: warning: symbol 'tunnel_dst_check' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
We don't encode argument types into function names and since besides nft_do_chain() there are only AF-specific versions, there is no risk of confusion. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Minor nf_chain_type cleanups: - reorder struct to plug a hoe - rename struct module member to "owner" for consistency - rename nf_hookfn array to "hooks" for consistency - reorder initializers for better readability Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
In some cases we neither take a reference to the AF info nor to the chain type, allowing the module to be unloaded while in use. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 08 1月, 2014 5 次提交
-
-
由 Patrick McHardy 提交于
This patch adds a new table family and a new filter chain that you can use to attach IPv4 and IPv6 rules. This should help to simplify rule-set maintainance in dual-stack setups. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Add support to register chains to multiple hooks for different address families for mixed IPv4/IPv6 tables. Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Patrick McHardy 提交于
Currently the AF-specific hook functions override the chain-type specific hook functions. That doesn't make too much sense since the chain types are a special case of the AF-specific hooks. Make the AF-specific hook functions the default and make the optional chain type hooks override them. As a side effect, the necessary code restructuring reduces the code size, f.i. in case of nf_tables_ipv4.o: nf_tables_ipv4_init_net | -24 nft_do_chain_ipv4 | -113 2 functions changed, 137 bytes removed, diff: -137 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jerry Chu 提交于
This patch built on top of Commit 299603e8 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5d "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
When lo is brought up, new ifa is created. Then, devconf and neigh values bitfield should be set so later changes of default values would not affect lo values. Note that the same behaviour is in ipv6. Also note that this is likely not an issue in many distros (for example Fedora 19) because userspace sets address to lo manually before bringing it up. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2014 2 次提交
-
-
由 Eric Dumazet 提交于
GRO/GSO layers can be enabled on a node, even if said node is only forwarding packets. This patch permits GSO (and upcoming GRO) support for GRE encapsulated packets, even if the host has no GRE tunnel setup. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP out_of_order_queue lock is not used, as queue manipulation happens with socket lock held and we therefore use the lockless skb queue routines (as __skb_queue_head()) We can use __skb_queue_head_init() instead of skb_queue_head_init() to make this more consistent. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2014 1 次提交
-
-
由 Li RongQing 提交于
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2014 3 次提交
-
-
由 Tom Herbert 提交于
percpu route cache eliminates share of dst refcnt between CPUs. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Avoid doing a route lookup on every packet being tunneled. In ip_tunnel.c cache the route returned from ip_route_output if the tunnel is "connected" so that all the rouitng parameters are taken from tunnel parms for a packet. Specifically, not NBMA tunnel and tos is from tunnel parms (not inner packet). Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The following code is not used in current upstream code. Some of this seems to be old hooks, other might be used by some out of tree module (which I don't care about breaking), and the need_ipv4_conntrack was used by old NAT code but no longer called. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 03 1月, 2014 1 次提交
-
-
由 Wei-Chun Chao 提交于
VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by: NWei-Chun Chao <weichunc@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 1 次提交
-
-
由 Weilong Chen 提交于
Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-