- 23 2月, 2011 7 次提交
-
-
由 Adrian Knoth 提交于
Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit e68d3b31. I'm copying his text here: The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged users to read uninitialized kernel stack memory, because several fields of the hdspm_config struct declared on the stack are not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong frequency and sync detection on AES32. According to him, the provided patch fixes these issues. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
In contrast to the RME MADI card, coax/optical selection on the MADIface is done via a physical switch located at the breakout box. Obviously, the driver cannot switch ports in software. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Caused by two typos, no output channel mappings were assigned for MADI/MADIface at double/quad speed. The channel mapping is indeed identical to the single speed mapping, the cards will simply use the first N channels. Signed-off-by: NFlorian Faber <faber@faberman.de> Signed-off-by: NFredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Without calling an appropriate rule, AES/AES32 cards would announce a theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the already known bug: [37422.640481] ------------[ cut here ]------------ [37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449 snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]() [37422.640489] Hardware name: PRIMERGY RX100 S6 [37422.640490] BUG? (info->channel >= hdspm->max_channels_in) [37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e snd_rawmidi power_meter [last unloaded: snd_hdspm] [37422.640501] Pid: 22231, comm: jackd Tainted: G D W 2.6.36-gentoo-r5 #5 [37422.640502] Call Trace: [37422.640508] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [37422.640511] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [37422.640514] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640518] [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm] [37422.640522] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [37422.640525] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [37422.640527] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640531] [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59 [37422.640533] [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227 [37422.640537] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [37422.640540] [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e [37422.640543] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [37422.640546] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [37422.640549] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [37422.640552] ---[ end trace 0cd919cd68118082 ]--- We already have all the right values in place, we simply have to inform the upper layers about this restriction. Note that snd_hdspm_hw_rule_rate_out_channels and snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because the channel count is always 16, no matter of the samplerate in use. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Only RayDAT and AIO provide sane buffer pointers that can be used with HDSPM_BufferPositionMask, on all other cards, this would result in a wrong HW pointer leading to xruns and these messages: [260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512 [260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512 Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
On RME AES and AES(32), none of the required information (max_channels_in, max_channels_out, channel mappings, port names) was set, leading to the BUG below. This patch adds the missing bits, thus fixing the bug. 125.058768] ------------[ cut here ]------------ [ 125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389 snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]() [ 125.058775] Hardware name: PRIMERGY RX100 S6 [ 125.058777] BUG? (info->channel >= hdspm->max_channels_out) [ 125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi i2c_i801 [ 125.058787] Pid: 3652, comm: audacity Tainted: G W 2.6.36-gentoo-r5 #5 [ 125.058788] Call Trace: [ 125.058792] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [ 125.058796] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [ 125.058800] [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm] [ 125.058803] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [ 125.058806] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [ 125.058809] [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6 [ 125.058812] [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227 [ 125.058815] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [ 125.058818] [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e [ 125.058821] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [ 125.058824] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [ 125.058827] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]--- Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NFlorian Faber <faber@faberman.de> Signed-off-by: NFredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 2月, 2011 1 次提交
-
-
由 Raymond Yau 提交于
Add " Playback Volume" to 10 bands Equalizer Controls of au88x0 so that alsa-lib won't regard them as "Capture Volume". Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 2月, 2011 2 次提交
-
-
由 Andreas Mohr 提交于
Make newly created AC97 emulation of azt3328 known to the AC97 layer side. - relocate common functions to the top (due to definition after use) - rename control names - adjust 3D settings to the card's custom layout of this register Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andreas Mohr 提交于
Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!) on this weird AC97 copycat hardware, via semi-extended I/O translation/emulation. Some 5kB binary/loaded size saved (well... additional huge AC97 module penalty not factored in, of course ;-P). Given that the driver previously had 20kB that's not bad, but the much more important thing is to have AC97 layer stress-tested with a thoroughly weird AC97 copycat (or, simply put, if it were not for this AC97 test aspect, this effort would merely have been a nut job ;). Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 2月, 2011 1 次提交
-
-
由 Andreas Mohr 提交于
Use AC97 macros (sometimes already existing, or newly added) instead of error-prone repetition of open-coded values. Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 2月, 2011 28 次提交
-
-
由 Eliot Blennerhassett 提交于
Firmware version check depends on hpi version. Update so correct firmware is accepted. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Difference in major.minor between driver and firmware is an error now. Release version mismatch give a warning. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
HPI version 4.05.32 Tweak HPI error code for backward compatibility. Add BUILD to build-related defines. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Interrupt flag used for message handshake will be required for stream interrupts, so conditionally compiled code without HPI6205_NO_HSR_POLL defined can never be used; removing it. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Remove unused function. Simplify hpi_alloc_control_cache. Remove useless assignment to struct subsequently freed. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Create and use HPI_ERROR_DSP_COMMUNICATION _DSP_BOOTLOAD, rather than backend-specific error codes (now returned as data with the error). Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
asihpi.c don't link playback and capture streams, there is too much offset between them. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Some error codes had duplicate meanings. Just use one. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Reported samples_played from card may be inaccurate, so don't use it. Update control names to be closer to alsa standard practice. Also fixed some accidentally lowercased strings. [Removed adriver.h inclusion for external module builds by tiwai] Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Remove many unused functions. Update some message and cache structs. Use pci info directly from pci_dev. Allow control cache elements with variable size, and handle large message/response from dsp. hpi6000 and hpi6205: fix error path when adapter bootload fails. hpimsgx.c get rid of code duplicated in hpicmn.c Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
All enum values numeric for easier finding, particularly error codes. Remove many unused declarations. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Log HPI messages and responses in consistent numeric format, which can be post-processed to get strings. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 1月, 2011 1 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-