- 15 2月, 2012 2 次提交
-
-
由 Johan Hedberg 提交于
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Peter Hurley 提交于
Commit 33060542 fixed l2cap conn establishment for non-ssp remote devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security is tested (which was always returning failure on any subsequent security checks). However, this broke l2cap conn establishment for ssp remote devices when an ACL link was already established at SDP-level security. This fix ensures that encryption must be pending whenever authentication is also pending. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Tested-by: NDaniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 23 1月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Fixes: net/bluetooth/hci_core.c: In function ‘__check_enable_hs’: net/bluetooth/hci_core.c:2587:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 1月, 2012 14 次提交
-
-
由 Andrei Emeltchenko 提交于
Remove unneeded skb_pull and correct packet length calculation removing magic number. Move BT_DBG after len check otherwise it could possibly access wrong memory. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Those vars need to be in sync, otherwise l2cap_core.c can get the wrong state. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Those locks are not shared between interrupt and process context anymore, so remove the part that disable interrupts. We are still safe because preemption is disabled. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
Stop Discovery Command Status Event should use mgmt status code. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch queues hdev->adv_work on the system-wide workqueue instead of on hdev->workqueue. This way we keep only tx/rx works on hdev->workqueue. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch fixes the adv_work delay. It should be set to ADV_ CLEAR_TIMEOUT instead of (jiffies + ADV_CLEAR_TIMEOUT) since queue_delayed_work() receives the number of jiffies to wait before queueing. It also removes the unnecessary cancel_delayed_ work_sync() call in case LE scan has been disabled. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
Copy the Features value according to the Page number. Signed-off-by: NAndre Guedes <aguedespe@gmail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch renames hdev->extfeatures to hdev->host_features since it holds the extended features Page 1 (aka host features). Signed-off-by: NAndre Guedes <aguedespe@gmail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
We don't need it anymore. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Everything is in process context now, we do not need such a call. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Those locks are not shared between interrupt and process context anymore, so remove the part that disable interrupts. We are still safe because preemption is disabled. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
We now run in process context, no need to disable interrupts. Calls from the tty layer also run in process context. rw_lock was converted to spinlock, we have more writers than readers in this case. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Code now run in process context, does not need to disable interrupt anymore. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It should be the dst in the copy not src. 03a00194 introduced this bug. Reported-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 28 12月, 2011 1 次提交
-
-
由 Gustavo F. Padovan 提交于
sock and sk were leftover from another change. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 24 12月, 2011 2 次提交
-
-
由 Gustavo F. Padovan 提交于
This reverts commit e1b6eb3c. This was causing a delay of 10 seconds in the resume process of a Thinkpad laptop. I'm afraid this could affect more devices once 3.2 is released. Reported-by: NTomáš Janoušek <tomi@nomi.cz> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Hemant Gupta 提交于
This patch fixes incorrect address storage while storing Long Term Key for LE Devices using SMP (Security Manager Protocol). The address stored should be of remote device and not of source device. Signed-off-by: NHemant Gupta <hemant.gupta@stericsson.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 23 12月, 2011 10 次提交
-
-
由 Gustavo F. Padovan 提交于
We run everything in process context now. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
They don't need to disable interrupts anymore, we only run in process context now. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
RFCOMM needs a proper priority mechanism inside itself and not try to use l2cap priority to fix its own problem. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Brian Gix 提交于
Low Energy pairing is performed through the SMP (Security Manager Protocol) mechanism rather than HCI. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Brian Gix 提交于
To achive Man-In-The-Middle (MITM) level security with Low Energy, we have to enable User Passkey Comparison. This commit modifies the hard-coded JUST-WORKS pairing mechanism to support query via the MGMT interface of Passkey comparison and User Confirmation. Signed-off-by: NBrian Gix <bgix@codeaurora.org> Acked-by: Marcel Holtmann<marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ulisses Furquim 提交于
When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ulisses Furquim 提交于
The struct hci_proto and all related register/unregister and dispatching code was removed. HCI core code now call directly the SCO and L2CAP event functions. Signed-off-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Make code readable by removing magic numbers. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
No local_bh_disable is needed there once we run everything in process context. The same goes for the replacement of bh_lock_sock() by lock_sock(). Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 12月, 2011 9 次提交
-
-
由 Ulisses Furquim 提交于
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ulisses Furquim 提交于
The hci_task_lock mutex (previously a lock) was supposed to protect the register/unregister of HCI protocols against RX/TX tasks. This will not be needed anymore because SCO and L2CAP will always be compiled. Moreover, with the recent move of RX/TX to workqueues per device the global hci_task_lock was causing starvation between different HCI devices. Signed-off-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It makes more sense this way, since info_timer is a timer using delayed work API. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
This one also needs to run in process context Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It is the only place where it is used. Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Current controller initialization is moved tp bredr_init and new function added amp_init to handle later AMP init sequence. Current AMP init sequence include Reset and Read Local Version. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 20 12月, 2011 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-