Currently we check for permission before deleting entries from SAD and
SPD, (see security_xfrm_policy_delete() security_xfrm_state_delete())
However we are not checking for authorization when flushing the SPD and
the SAD completely. It was perhaps missed in the original security hooks
patch.

This patch adds a security check when flushing entries from the SAD and
SPD.  It runs the entire database and checks each entry for a denial.
If the process attempting the flush is unable to remove all of the
entries a denial is logged the the flush function returns an error
without removing anything.

This is particularly useful when a process may need to create or delete
its own xfrm entries used for things like labeled networking but that
same process should not be able to delete other entries or flush the
entire database.

Signed-off-by: Joy Latten<latten@austin.ibm.com>
Signed-off-by: NEric Paris <eparis@parisplace.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

cbq and atm destroy their filters twice when destroying inner classes
during qdisc destruction.
Reported-and-tested-by: NStrobl Anton <a.strobl@aws-it.at>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When changing the link state from userspace not affecting any other
flags. Two duplicate notification are being sent, once as action
in the NETDEV_UP/NETDEV_DOWN notification chain and a second time
when comparing old and new device flags after the change has been
completed. Although harmless, the duplicates should be avoided.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts changesets:

6aaf47fa
b7b5f487
de34ed91
fc038410

There are still some correctness issues recently
discovered which do not have a known fix that doesn't
involve doing a full hash table scan on port bind.

So revert for now.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A recv() on an AF_UNIX, SOCK_STREAM socket can race with a
send()+close() on the peer, causing recv() to return zero, even though
the sent data should be received.

This happens if the send() and the close() is performed between
skb_dequeue() and checking sk->sk_shutdown in unix_stream_recvmsg():

process A  skb_dequeue() returns NULL, there's no data in the socket queue
process B  new data is inserted onto the queue by unix_stream_sendmsg()
process B  sk->sk_shutdown is set to SHUTDOWN_MASK by unix_release_sock()
process A  sk->sk_shutdown is checked, unix_release_sock() returns zero

I'm surprised nobody noticed this, it's not hard to trigger.  Maybe
it's just (un)luck with the timing.

It's possible to work around this bug in userspace, by retrying the
recv() once in case of a zero return value.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The return value from textsearch_prepare() needs to be checked
by IS_ERR(). Because it returns error code as a pointer.

Cc: "Brian J. Murrell" <netfilter@interlinx.bc.ca>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

check_compat_entry_size_and_hooks iterates over the matches and calls
compat_check_calc_match, which loads the match and calculates the
compat offsets, but unlike the non-compat version, doesn't call
->checkentry yet. On error however it calls cleanup_matches, which in
turn calls ->destroy, which can result in crashes if the destroy
function (validly) expects to only get called after the checkentry
function.

Add a compat_release_match function that only drops the module reference
on error and rename compat_check_calc_match to compat_find_calc_match to
reflect the fact that it doesn't call the checkentry function.

Reported by Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a helper module is unloaded all conntracks refering to it have their
helper pointer NULLed out, leading to lots of races. In most places this
can be fixed by proper use of RCU (they do already check for != NULL,
but in a racy way), additionally nf_conntrack_expect_related needs to
bail out when no helper is present.

Also remove two paranoid BUG_ONs in nf_conntrack_proto_gre that are racy
and not worth fixing.
Signed-off-by: NPatrick McHarrdy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ifindex == 0 does not exist and implies we should do a lookup by name if
one was given.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GCC doesn't like the way Stephen initially did it:

net/ipv4/tcp_probe.c:83: warning: empty declaration
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

LIMIT_NETDEBUG allows the admin to disable some warning messages (echo 0
 >/proc/sys/net/core/warnings).

The "TCP: Treason uncloaked!" message can use this facility.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously inet devices were only constructed when addresses are added
(or rarely in ipmr).  Therefore the default config values they get are
the ones at the time of these operations.

Now that we're creating inet devices earlier, this changes the
behaviour of default config values in an incompatible way (see bug
#8519).

This patch creates a compromise by setting the default values at the
same point as before but only for those that have not been explicitly
set by the user since the inet device's creation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously once inetdev_init has been called on a device any changes
made to ipv4_devconf_dflt would have no effect on that device's
configuration.

This creates a problem since we have moved the point where
inetdev_init is called from when an address is added to where the
device is registered.

This patch is the first half of a set that tries to mimic the old
behaviour while still calling inetdev_init.

It propagates any changes to ipv4_devconf_dflt to those devices that
have not had the corresponding attribute set.

The next patch will forcibly set all values at the point where
inetdev_init was previously called.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts the ipv4_devconf config members (everything except
sysctl) to an array.  This allows easier manipulation which will be
needed later on to provide better management of default config values.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When I made the inetdev_init call work on all devices I incorrectly
left in the panic call as well.  It is obviously undesirable to
panic on an allocation failure for a normal network device.  This
patch moves the panic call under the loopback if clause.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A time_wait socket inherits sk_bound_dev_if from the original socket,
but it is not used when sending ACK packets using ip_send_reply.

Fix by passing the oif to ip_send_reply in struct ip_reply_arg and
use it for output routing.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when icmp_errors_use_inbound_ifaddr is set and an ICMP error is
sent after the packet passed through ip_output(), an address from the
outgoing interface is chosen as ICMP source address since skb->dev doesn't
point to the incoming interface anymore.

Fix this by doing an interface lookup on rt->dst.iif and using that device.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NWei Dong <weidong@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This isn't a bug just yet as only TCP uses sk_setup_caps for GSO.
However, if and when UDP or something else starts using it this is
likely to cause a problem if we forget to add software emulation
for it at the same time.

The problem is that right now we translate GSO emulation to the
bitmask NETIF_F_GSO_MASK, which includes every protocol, even
ones that we cannot emulate.

This patch makes it provide only the ones that we can emulate.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code used to ignore GSO completely, passing either way too
small or zero pkts_acked when GSO skb or part of it got ACKed.
In addition, there is no need to calculate the value in the loop
but simple arithmetics after the loop is sufficient. There is
no need to handle SYN case specially because congestion control
modules are not yet initialized when FLAG_SYN_ACKED is set.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent gcc versions emit warnings when unsigned variables are
compared < 0 or >= 0.
Signed-off-by: NBill Nottingham <notting@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

round_jiffies for net dev watchdog timer.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This diff changes the default port range used for outgoing connections,
from "use 32768-61000 in most cases, but use N-4999 on small boxes
(where N is a multiple of 1024, depending on just *how* small the box
is)" to just "use 32768-61000 in all cases".

I don't believe there are any drawbacks to this change, and it keeps
outgoing connection ports farther away from the mess of
IANA-registered ports.
Signed-off-by: NMark Glines <mark@glines.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon an excellent bug report and initial patch by
Frederik Deweerdt.

The UNIX datagram connect code blindly dereferences other->sk_socket
via the call down to the security_unix_may_send() function.

Without locking 'other' that pointer can go NULL via unix_release_sock()
which does sock_orphan() which also marks the socket SOCK_DEAD.

So we have to lock both 'sk' and 'other' yet avoid all kinds of
potential deadlocks (connect to self is OK for datagram sockets and it
is possible for two datagram sockets to perform a simultaneous connect
to each other).  So what we do is have a "double lock" function similar
to how we handle this situation in other areas of the kernel.  We take
the lock of the socket pointer with the smallest address first in
order to avoid ABBA style deadlocks.

Once we have them both locked, we check to see if SOCK_DEAD is set
for 'other' and if so, drop everything and retry the lookup.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unix_state_*() locking macros imply that there is some
rwlock kind of thing going on, but the implementation is
actually a spinlock which makes the code more confusing than
it needs to be.

So use plain unix_state_lock and unix_state_unlock.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interface for network device VLAN extension was confusing.
The kill_vid function is only really useful for devices that do
hardware filtering. Devices that only do VLAN receiption without
filtering were being forced to provide the hook, and there were
bugs in those devices.

Many drivers had kill_vid routine that called vlan_group_set_device, with
NULL, but that is done already.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Peroidic STP timers don't have to be exact.  The hold timer runs at
1HZ, and the hello timer normally runs at 2HZ; save power by aligning
it them to next second.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridge cleanup timer is fired 10 times a second for timers that
are at least 15 seconds ahead in time and that are not critical to be
cleaned asap.

This patch calculates the next time to run the timer as the minimum of
all timers or a minimum based on the current state.
Signed-off-by: NBaruch Even <baruch@ev-en.org>
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function in tcp_probe is printf like, use GCC to check the args.
Sighed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just a fix to correct the number of printl arguments. Now, srtt is
logging correctly.
Signed-off-by: NSangtae Ha <sangtae.ha@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_out_of_resources() and tcp_close() perform the
same checking of number of orphan sockets. Move this
code into common place.
Signed-off-by: NPavel Emelianov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Always set, but af_packet.c, not by the Kconfig subsystem, so
just get rid of it.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv6/ip6_fib.c: In function ‘fib6_add_rt2node’:
net/ipv6/ip6_fib.c:661: warning: label ‘out’ defined but not used
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is unconditionally set by af_packet.c, not by the Kconfig
subsystem, so just kill it off.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKazunori MIYAZAWA <kazunori@miyazawa.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in4_pton converts a textual representation of an ip4 address
into an integer representation. However, when the textual representation
is of in the form ip:port, e.g. 192.168.1.1:5060, and 'delim' is set to
-1, the function bails out with an error when reading the colon.

It makes sense to allow the colon as a delimiting character without
explicitly having to set it through the 'delim' variable as there can be
no ambiguity in the point where the ip address is completely parsed. This
function is indeed called from nf_conntrack_sip.c in this way to parse
textual ip:port combinations which fails due to the reason stated above.
Signed-off-by: NJerome Borsboom <j.borsboom@erasmusmc.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We do not need to handle ::/0 routes specially any longer.
This should fix BUG #8349.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NYuji Sekiya <sekiya@wide.ad.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>