- 03 7月, 2014 1 次提交
-
-
由 Anjali Singhai Jain 提交于
The HW still needs to consume it and freeing it in the function that created it would mean we will be racing with the HW. The i40e_clean_tx_ring() routine will free up the buffer attached once the HW has consumed it. The clean_fdir_tx_irq function had to be fixed to handle the freeing correctly. Cases where we program more than one filter per flow (Ipv4), the code had to be changed to allocate dummy buffer multiple times since it will be freed by the clean routine. This also fixes an issue where the filter program routine was not checking if there were descriptors available for programming a filter. Change-ID: Idf72028fd873221934e319d021ef65a1e51acaf7 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 7月, 2014 2 次提交
-
-
由 Jesse Brandeburg 提交于
Driver needs to initialize all members of context descriptor. Stale data is possible otherwise. Change-ID: Idc6b53af45583509da42d5ec0824cbaf78aee64f Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
With the auto_disable flags added there was a bug that was causing the replay logic to not work correctly. This patch fixes the issue so that we call a replay after a sideband reset correctly. Change-ID: I005fe1ac361188ee5b19517a83c922038cba1b00 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 26 6月, 2014 3 次提交
-
-
由 Jesse Brandeburg 提交于
There were a couple of fields in the fdir descriptor setup that were not being reprogrammed, which left the opportunity for stale data to be pushed as part of the descriptor next time it was used. Change-ID: Ieee5c96a7d4713d469693f086c4854de949a7633 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Hardware does not have a way of telling a PF how much of the global shared FD table space is still available or is consumed. Previously, every PF but PF0 would think there was still space available when there wasn't. The PFs would continue to try to add filters and fail. With this new logic if a filter programming error is detected we just check if we are close to the guaranteed space full and that can be used as a hint to say, there might not be space and we should turn off the features. This way we can turn off the feature in SW for all PFs in time. Change-ID: I725cb2fab16c033f883056362b4542c1400503c5 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
There wasn't a need to play the logic twice, it seems like a left over from when we had to add two PTYPEs for one filter. There should be no change in the number of filters that actually got added to the hardware. Change-ID: I5071d02eafd020b60e30eb96219f110f334eec85 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 6月, 2014 1 次提交
-
-
由 Anjali Singhai Jain 提交于
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 6月, 2014 2 次提交
-
-
由 Jesse Brandeburg 提交于
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The number of VSIs that the firmware reports to us is a guaranteed minimum, not an absolute maximum. The hardware actually supports far more than the reported value, which we often need. To allow for this, we allocate space for a larger number of VSIs than is guaranteed by the firmware, with the knowledge that we may fail to get them all in the future. Note that we are just allocating pointers here, the actual (much larger) VSI structures are allocated on demand. Change-ID: I6f4e535ce39d3bf417aef78306e04fbc7505140e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 6月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
The TSO logic in the transmit path had some assumptions that have been broken now that the kernel can send as much as 32kB in a single skb->frag[.] entry, even on a system with 4kB pages. This fixes the assumptions and allows the kernel to operate as efficiently as possible with both SENDFILE and SEND. In addition, the hardware limit of data contained in a descriptor is changed to the next power of two below where it currently is in order to align to a power of two value, preventing a single byte of data in a descriptor. Change-ID: I6af1f0b87c1458e10644dbd47541591075a52651 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 6月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
A couple of FD checks ended up using bitwise OR to check a value, which ends up always being evaluated to true. This should fix the issue. Thanks to DaveJ for noticing and reporting the issue! CC: Dave Jones <davej@redhat.com> Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 29 5月, 2014 2 次提交
-
-
由 Anjali Singhai Jain 提交于
We have a function to calculate this, so update the code to use the function. Change-ID: Ia345b6fe6ec7f0b2dcf1199471b0d0f959ad3908 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kevin Scott 提交于
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 21 5月, 2014 1 次提交
-
-
由 Mitch Williams 提交于
On some architectures, this header must be explicitly included. Change-ID: I4bc2eb0531956a7b676489f79d347d55cfe12421 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 28 4月, 2014 1 次提交
-
-
由 Jacob Keller 提交于
This patch removes the unnecessary ptp_tx_work item. It conflicts with the interrupt-based handler, and will cause spurious warning messages to be displayed in the kernel log. Since the hardware can properly trigger an interrupt, we do not need to poll for an available timestamp in a work queue any more. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 19 4月, 2014 2 次提交
-
-
由 Jakub Kicinski 提交于
Add \n at the end of messages where missing, remove all \r. Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 4月, 2014 1 次提交
-
-
由 Jean Sacren 提交于
The commit c7d05ca8 ("i40e: driver ethtool core") introduced the new function i40e_add_del_fdir_sctpv4() with the kernel doc description a little bit off. The trivial error was copied over to a different file by the commit 17a73f6b ("i40e: Flow Director sideband accounting") most recently. Fix the kernel doc with the correct description for clarity. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NJean Sacren <sakiwit@gmail.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 28 3月, 2014 2 次提交
-
-
由 Anjali Singhai Jain 提交于
We don't need to print this info unless at FD message level. Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
We currently delete ATR filter on FIN alone, delete on RST as well. Change-ID: Ie7cae5d1046b9d1d4a0d6ef5bdbf41224c3dade6 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 20 3月, 2014 2 次提交
-
-
由 Jesse Brandeburg 提交于
We don't need context descriptors for every packet, only tso or timesync. This fixes a bug in the driver where it would always add a context even if all the passed in values to the context descriptor function were 0/default values. Change-ID: I0101d2b893380707b5c2de61aab3e16d4310e9a1 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The hardware supports a feature to avoid updating the descriptor ring by marking each descriptor with a DD bit, and instead writes a memory location with an update to where the driver should clean up to. Enable this feature. Change-ID: I5da4e0681f0b581a6401c950a81808792267fe57 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 15 3月, 2014 2 次提交
-
-
由 Eric W. Biederman 提交于
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anjali Singhai Jain 提交于
Add code to enforce the following policy: - If the HW reports filter programming error, we check if it's due to a full table. - If so, we go ahead and turn off new rule addition for ATR and then SB in that order. - We monitor the programmed filter count, if enough room is created due to filter deletion/reset, we then re-enable SB and ATR new rule addition. Change-ID: I69d24b29e5c45bc4fa861258e11c2fa7b8868748 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 3月, 2014 3 次提交
-
-
由 Jesse Brandeburg 提交于
We need to make sure that we stay away from the cache line where the DD bit (done) may be getting written back for the transmit ring since the hardware may be writing the whole cache line for a partial update. Change-ID: Id0b6dfc01f654def6a2a021af185803be1915d7e Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Original comment from Tom Herbert <therbert@google.com> Drivers should call skb_set_hash to set the hash and its type in an skbuff. This patch builds upon Tom's original implementation and adds the L4 type return when we know it is an L4 hash. This requires use of the ptype decoder ring, so enable it. Change-ID: I2f9fa86d1a6add58cff13386f7f4238b1abcc468 CC: Tom Herbert <therbert@google.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Joseph Gasparakis 提交于
This patch completes implementation of the ethtool ntuple rule management interface. It adds the get, update and delete interface reset. Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5 Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 14 2月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
Fix a spelling error, s/extention/extension/. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
The FLAG_FDIR_* defines can be renamed to be more descriptive. This patch is in preparation for the following where the fdir code is refactored. Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
Fix some whitespace and comment issues. Change-ID: I1587599e50ce66fd389965720e86f9e331d86643 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 2 次提交
-
-
由 Jacob Keller 提交于
New feature: Enable PTP support in the i40e driver. Change-ID: I6a8e799f582705191f9583afb1b9231a8db96cc8 Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NMatthew Vick <matthew.vick@intel.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
If the IPV6EXADD bit is set in the Rx descriptor status, there was an optional extension header with an alternate IP address detected. The HW checksum offload doesn't handle the alternate IP address correctly so likely comes up with the wrong answer. Thus, if the bit is set we ignore the checksum offload value. Change-ID: I70ff8d38cdcddccf44107691cae13d0c07c284c8 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 1月, 2014 4 次提交
-
-
由 Mitch Williams 提交于
Fix some badly formatted lines, long lines and a mis-formatted else. Change-ID: Iac2eef064ae27c55a0c3d9c15c525bf8fed8ab6f Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The alloc_rx_buff_failed and alloc_rx_page_failed variables are both part of an rx specific structure so just remove the _rx part of the name. No functional changes. Change-ID: Icffa2f5d13c6f2b1e09cf45b9472b83c9dae8fc6 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The memory barrier used in maybe_stop_tx can use a comment. Also add checks to VSI->rx_rings to ensure a kernel panic is not induced. Change-ID: I48cc1bf1d6cf301818155b737edeef77c0d790c7 Change-ID: I1363a8445fbf521a26267849966296ed55f43ad8 Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The GPL header included in each file in the i40e driver doesn't need to include the "this program" text since this driver is already part of the larger kernel. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 1月, 2014 1 次提交
-
-
由 Anjali Singhai Jain 提交于
Save information that we can use while cleaning the tx ring. Also record the time_stamp since we will need it to check tx hangs. Change-Id: Ia3f1c17f6fec9bcb7fef2542d77eac7f6c4f115c Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 1月, 2014 1 次提交
-
-
由 Jesse Brandeburg 提交于
replace __constant_htons with htons Change-Id: I123a5318bae34c8b004c71db07c56f137c685849 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 1月, 2014 1 次提交
-
-
由 Joseph Gasparakis 提交于
This implements receive offload for VXLAN for i40e. The hardware supports checksum offload/verification of the inner/outer header. Change-Id: I450db300af6713f2044fef1191a0d1d294c13369 Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 07 12月, 2013 1 次提交
-
-
由 Jesse Brandeburg 提交于
The hash is reported correctly in the rss field if and only if the filter status is 3. Other values of filter status mean different things and we shouldn't depend on a bitwise result. The issue was that a & b --> returns true for b={1,2,3} the fix is a & b == b Also refactor this function to use constant operations because we are in fast path. Change-Id: I4e29be87439c1cf8b60bc31bea29dff89596c013 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-