Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 7月, 2009 1 次提交
  3. 07 7月, 2009 1 次提交
  5. 06 7月, 2009 1 次提交
  7. 04 7月, 2009 2 次提交
    • B
      IPv6: preferred lifetime of address not getting updated · a1ed0526
      由 Brian Haley 提交于 
      There's a bug in addrconf_prefix_rcv() where it won't update the
preferred lifetime of an IPv6 address if the current valid lifetime
of the address is less than 2 hours (the minimum value in the RA).

For example, If I send a router advertisement with a prefix that
has valid lifetime = preferred lifetime = 2 hours we'll build
this address:

3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
    inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic
       valid_lft 7175sec preferred_lft 7175sec

If I then send the same prefix with valid lifetime = preferred
lifetime = 0 it will be ignored since the minimum valid lifetime
is 2 hours:

3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
    inet6 2001:1890:1109:a20:217:8ff:fe7d:4718/64 scope global dynamic
       valid_lft 7161sec preferred_lft 7161sec

But according to RFC 4862 we should always reset the preferred lifetime
even if the valid lifetime is invalid, which would cause the address
to immediately get deprecated.  So with this patch we'd see this:

5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
    inet6 2001:1890:1109:a20:21f:29ff:fe5a:ef04/64 scope global deprecated dynamic
       valid_lft 7163sec preferred_lft 0sec

The comment winds-up being 5x the size of the code to fix the problem.

Update the preferred lifetime of IPv6 addresses derived from a prefix
info option in a router advertisement even if the valid lifetime in
the option is invalid, as specified in RFC 4862 Section 5.5.3e.  Fixes
an issue where an address will not immediately become deprecated.
Reported by Jens Rosenboom.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a1ed0526
    • W
      xfrm6: fix the proto and ports decode of sctp protocol · 59cae009
      由 Wei Yongjun 提交于 
      The SCTP pushed the skb above the sctp chunk header, so the
check of pskb_may_pull(skb, nh + offset + 1 - skb->data) in
_decode_session6() will never return 0 and the ports decode
of sctp will always fail. (nh + offset + 1 - skb->data < 0)
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59cae009
  9. 27 6月, 2009 2 次提交
  11. 26 6月, 2009 1 次提交
  13. 23 6月, 2009 1 次提交
  15. 18 6月, 2009 1 次提交
  17. 14 6月, 2009 1 次提交
    • T
      PIM-SM: namespace changes · 403dbb97
      由 Tom Goff 提交于 
      IPv4:
  - make PIM register vifs netns local
  - set the netns when a PIM register vif is created
  - make PIM available in all network namespaces (if CONFIG_IP_PIMSM_V2)
    by adding the protocol handler when multicast routing is initialized

IPv6:
  - make PIM register vifs netns local
  - make PIM available in all network namespaces (if CONFIG_IPV6_PIMSM_V2)
    by adding the protocol handler when multicast routing is initialized
Signed-off-by: NTom Goff <thomas.goff@boeing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      403dbb97
  19. 13 6月, 2009 2 次提交
  21. 11 6月, 2009 1 次提交
    • E
      net: No more expensive sock_hold()/sock_put() on each tx · 2b85a34e
      由 Eric Dumazet 提交于 
      One of the problem with sock memory accounting is it uses
a pair of sock_hold()/sock_put() for each transmitted packet.

This slows down bidirectional flows because the receive path
also needs to take a refcount on socket and might use a different
cpu than transmit path or transmit completion path. So these
two atomic operations also trigger cache line bounces.

We can see this in tx or tx/rx workloads (media gateways for example),
where sock_wfree() can be in top five functions in profiles.

We use this sock_hold()/sock_put() so that sock freeing
is delayed until all tx packets are completed.

As we also update sk_wmem_alloc, we could offset sk_wmem_alloc
by one unit at init time, until sk_free() is called.
Once sk_free() is called, we atomic_dec_and_test(sk_wmem_alloc)
to decrement initial offset and atomicaly check if any packets
are in flight.

skb_set_owner_w() doesnt call sock_hold() anymore

sock_wfree() doesnt call sock_put() anymore, but check if sk_wmem_alloc
reached 0 to perform the final freeing.

Drawback is that a skb->truesize error could lead to unfreeable sockets, or
even worse, prematurely calling __sk_free() on a live socket.

Nice speedups on SMP. tbench for example, going from 2691 MB/s to 2711 MB/s
on my 8 cpu dev machine, even if tbench was not really hitting sk_refcnt
contention point. 5 % speedup on a UDP transmit workload (depends
on number of flows), lowering TX completion cpu usage.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2b85a34e
  23. 09 6月, 2009 2 次提交
  25. 08 6月, 2009 1 次提交
    • J
      netfilter: nf_ct_icmp: keep the ICMP ct entries longer · f87fb666
      由 Jan Kasprzak 提交于 
      Current conntrack code kills the ICMP conntrack entry as soon as
the first reply is received. This is incorrect, as we then see only
the first ICMP echo reply out of several possible duplicates as
ESTABLISHED, while the rest will be INVALID. Also this unnecessarily
increases the conntrackd traffic on H-A firewalls.

Make all the ICMP conntrack entries (including the replied ones)
last for the default of nf_conntrack_icmp{,v6}_timeout seconds.
Signed-off-by: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
      f87fb666
  27. 04 6月, 2009 1 次提交
  29. 03 6月, 2009 2 次提交
    • E
      net: skb->dst accessors · adf30907
      由 Eric Dumazet 提交于 
      Define three accessors to get/set dst attached to a skb

struct dst_entry *skb_dst(const struct sk_buff *skb)

void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)

void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;

Delete skb->dst field
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      adf30907
    • P
      netfilter: conntrack: simplify event caching system · 17e6e4ea
      由 Pablo Neira Ayuso 提交于 
      This patch simplifies the conntrack event caching system by removing
several events:

 * IPCT_[*]_VOLATILE, IPCT_HELPINFO and IPCT_NATINFO has been deleted
   since the have no clients.
 * IPCT_COUNTER_FILLING which is a leftover of the 32-bits counter
   days.
 * IPCT_REFRESH which is not of any use since we always include the
   timeout in the messages.

After this patch, the existing events are:

 * IPCT_NEW, IPCT_RELATED and IPCT_DESTROY, that are used to identify
 addition and deletion of entries.
 * IPCT_STATUS, that notes that the status bits have changes,
 eg. IPS_SEEN_REPLY and IPS_ASSURED.
 * IPCT_PROTOINFO, that reports that internal protocol information has
 changed, eg. the TCP, DCCP and SCTP protocol state.
 * IPCT_HELPER, that a helper has been assigned or unassigned to this
 entry.
 * IPCT_MARK and IPCT_SECMARK, that reports that the mark has changed, this
 covers the case when a mark is set to zero.
 * IPCT_NATSEQADJ, to report that there's updates in the NAT sequence
 adjustment.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      17e6e4ea
  31. 02 6月, 2009 1 次提交
  33. 01 6月, 2009 1 次提交
  35. 27 5月, 2009 1 次提交
  37. 22 5月, 2009 1 次提交
  39. 21 5月, 2009 2 次提交
    • J
      IPv6: set RTPROT_KERNEL to initial route · 4f724279
      由 Jean-Mickael Guerin 提交于 
      The use of unspecified protocol in IPv6 initial route prevents quagga to
install IPv6 default route:
# show ipv6 route
S   ::/0 [1/0] via fe80::1, eth1_0
K>* ::/0 is directly connected, lo, rej
C>* ::1/128 is directly connected, lo
C>* fe80::/64 is directly connected, eth1_0

# ip -6 route
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
ff00::/8 dev eth1_0  metric 256  mtu 1500 advmss 1440 hoplimit -1
unreachable default dev lo  proto none  metric -1  error -101 hoplimit 255

The attached patch ensures RTPROT_KERNEL to the default initial route
and fixes the problem for quagga.
This is similar to "ipv6: protocol for address routes"
f410a1fb.

# show ipv6 route
S>* ::/0 [1/0] via fe80::1, eth1_0
C>* ::1/128 is directly connected, lo
C>* fe80::/64 is directly connected, eth1_0

# ip -6 route
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
ff00::/8 dev eth1_0  metric 256  mtu 1500 advmss 1440 hoplimit -1
default via fe80::1 dev eth1_0  proto zebra  metric 1024  mtu 1500
advmss 1440 hoplimit -1
unreachable default dev lo  proto kernel  metric -1  error -101 hoplimit 255
Signed-off-by: NJean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f724279
    • R
      net: Remove unused parameter from fill method in fib_rules_ops. · 04af8cf6
      由 Rami Rosen 提交于 
      The netlink message header (struct nlmsghdr) is an unused parameter in
fill method of fib_rules_ops struct.  This patch removes this
parameter from this method and fixes the places where this method is
called.

(include/net/fib_rules.h)
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      04af8cf6
  41. 20 5月, 2009 5 次提交
  43. 19 5月, 2009 1 次提交
  45. 18 5月, 2009 2 次提交
  47. 08 5月, 2009 6 次提交