Currently every sched_class::set_cpus_allowed() implementation has to
copy the cpumask into task_struct::cpus_allowed, this is pointless,
put this copy in the generic code.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-jhl5s9fckd9ptw1fzbqqlrd3@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

This task is preparatory for the migrate_disable() implementation, but
stands on its own and provides a cleanup.

It currently only converts those sites required for task-placement.
Kosaki-san once mentioned replacing cpus_allowed with a proper
cpumask_t instead of the NR_CPUS sized array it currently is, that
would also require something like this.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Link: http://lkml.kernel.org/n/tip-e42skvaddos99psip0vce41o@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

rq's idle_at_tick is set to idle/busy during the timer tick
depending on the cpu was idle or not. This will be used later in the load
balance that will be done in the softirq context (which is a process
context in -RT kernels).

For nohz kernels, for the cpu doing nohz idle load balance on behalf of
all the idle cpu's, its rq->idle_at_tick might have a stale value (which is
recorded when it got the timer tick presumably when it is busy).

As the nohz idle load balancing is also being done at the same place
as the regular load balancing, nohz idle load balancing was bailing out
when it sees rq's idle_at_tick not set.

Thus leading to poor system utilization.

Rename rq's idle_at_tick to idle_balance and set it when someone requests
for nohz idle balance on an idle cpu.
Reported-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111003220934.892350549@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Current use of smp call function to kick the nohz idle balance can deadlock
in this scenario.

1. cpu-A did a generic_exec_single() to cpu-B and after queuing its call single
data (csd) to the call single queue, cpu-A took a timer interrupt.  Actual IPI
to cpu-B to process the call single queue is not yet sent.

2. As part of the timer interrupt handler, cpu-A decided to kick cpu-B
for the idle load balancing (sets cpu-B's rq->nohz_balance_kick to 1)
and __smp_call_function_single() with nowait will queue the csd to the
cpu-B's queue. But the generic_exec_single() won't send an IPI to cpu-B
as the call single queue was not empty.

3. cpu-A is busy with lot of interrupts

4. Meanwhile cpu-B is entering and exiting idle and noticed that it has
it's rq->nohz_balance_kick set to '1'. So it will go ahead and do the
idle load balancer and clear its rq->nohz_balance_kick.

5. At this point, csd queued as part of the step-2 above is still locked
and waiting to be serviced on cpu-B.

6. cpu-A is still busy with interrupt load and now it got another timer
interrupt and as part of it decided to kick cpu-B for another idle load
balancing (as it finds cpu-B's rq->nohz_balance_kick cleared in step-4
above) and does __smp_call_function_single() with the same csd that is
still locked.

7. And we get a deadlock waiting for the csd_lock() in the
__smp_call_function_single().

Main issue here is that cpu-B can service the idle load balancer kick
request from cpu-A even with out receiving the IPI and this lead to
doing multiple __smp_call_function_single() on the same csd leading to
deadlock.

To kick a cpu, scheduler already has the reschedule vector reserved. Use
that mechanism (kick_process()) instead of using the generic smp call function
mechanism to kick off the nohz idle load balancing and avoid the deadlock.

   [ This issue is present from 2.6.35+ kernels, but marking it -stable
     only from v3.0+ as the proposed fix depends on the scheduler_ipi()
     that is introduced recently. ]
Reported-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org # v3.0+
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111003220934.834943260@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: pick up latest fixes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://github.com/davem330/net:
  pch_gbe: Fixed the issue on which a network freezes
  pch_gbe: Fixed the issue on which PC was frozen when link was downed.
  make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
  net: xen-netback: correctly restart Tx after a VM restore/migrate
  bonding: properly stop queuing work when requested
  can bcm: fix incomplete tx_setup fix
  RDSRDMA: Fix cleanup of rds_iw_mr_pool
  net: Documentation: Fix type of variables
  ibmveth: Fix oops on request_irq failure
  ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
  cxgb4: Fix EEH on IBM P7IOC
  can bcm: fix tx_setup off-by-one errors
  MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
  dp83640: reduce driver noise
  ptp: fix L2 event message recognition

* 'fix/asoc' of git://github.com/tiwai/sound:
  ASoC: omap_mcpdm_remove cannot be __devexit
  ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
  ASoC: use a valid device for dev_err() in Zylonite

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix channel_remap setup (v2)
  drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
  drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
  drm/radeon: Simplify cursor x/yorigin calculation.
  drm/radeon/kms: fix cursor image off-by-one error
  drm/radeon/kms: Fix logic error in DP HPD handler
  drm/radeon/kms: add retry limits for native DP aux defer
  drm/radeon/kms: fix regression in DP aux defer handling

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: Fix overrun issue
  spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
  spi-topcliff-pch: Fix CPU read complete condition issue
  spi-topcliff-pch: Fix SSN Control issue
  spi-topcliff-pch: add tx-memory clear after complete transmitting

Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults.  Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.

Also, add the option for peer to peer DMA MPS configuration.  Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another.  To work around this, simply make the system
wide MPS the smallest possible value (128B).
Signed-off-by: NJon Mason <mason@myri.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most asics just use the hw default value which requires
no explicit programming.  For those that need a different
value, the vbios will program it properly.  As such,
there's no need to program these registers explicitly
in the driver.  Changing MC_SHARED_CHREMAP requires a reload
of all data in vram otherwise its contents will be scambled.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=40103

v2: drop now unused channel_remap functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We found that adding load, Rx data sometimes drops.(with DMA transfer mode)
The cause is that before starting Rx-DMA processing, Tx-DMA processing starts.
This causes FIFO overrun occurs.

This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor
size like below.

                      Current                   this patch
Rx-descriptor   4Byte+12Byte*341    -->    12Byte*340-4Byte-12Byte
Rx-threshold                   (Not modified)
Tx-descriptor   4Byte+12Byte*341    -->    16Byte-12Byte*340
Rx-threshold    12Byte              -->    2Byte
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add recovery processing in case FIFO overrun error occurs with DMA transfer mode.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

We found Rx data sometimes drops.(with non-DMA transfer mode)
The cause is read complete condition is not true.

This patch fixes the issue.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

During processing 1 command/data series,
SSN should keep LOW.
However, currently, SSN becomes HIGH.
This patch fixes the issue.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Currently, in case of reading date from SPI flash,
command is sent twice.
The cause is that tx-memory clear processing is missing .
This patch adds the tx-momory clear processing.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

On -rt we observed hackbench waking all 400 tasks to a single cpu.
This is because of select_idle_sibling()'s interaction with the new
ipi based wakeup scheme.

The existing idle_cpu() test only checks to see if the current task on
that cpu is the idle task, it does not take already queued tasks into
account, nor does it take queued to be woken tasks into account.

If the remote wakeup IPIs come hard enough, there won't be time to
schedule away from the idle task, and would thus keep thinking the cpu
was in fact idle, regardless of the fact that there were already
several hundred tasks runnable.

We couldn't reproduce on mainline, but there's no reason it couldn't
happen.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3o30p18b2paswpc9ohy2gltp@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Initial benchmarks show they're a net loss:

 $ for i in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do echo performance > $i; done
 $ echo 4096 32000 64 128 > /proc/sys/kernel/sem
 $ ./sembench -t 2048 -w 1900 -o 0

Pre:

 run time 30 seconds 778936 worker burns per second
 run time 30 seconds 912190 worker burns per second
 run time 30 seconds 817506 worker burns per second
 run time 30 seconds 830870 worker burns per second
 run time 30 seconds 845056 worker burns per second

Post:

 run time 30 seconds 905920 worker burns per second
 run time 30 seconds 849046 worker burns per second
 run time 30 seconds 886286 worker burns per second
 run time 30 seconds 822320 worker burns per second
 run time 30 seconds 900283 worker burns per second

So about 4% faster. (!)

cpu_relax() stalls the pipeline, therefore, when used in a tight loop
it has the following benefits:

 - allows SMT siblings to have a go;
 - reduces pressure on the CPU interconnect.

However, cmpxchg loops are unfair and thus have unbounded completion
time, therefore we should avoid getting in such heavily contended
situations where the above benefits make any difference.

A typical cmpxchg loop should not go round more than a handfull of
times at worst, therefore adding extra delays just slows things down.

Since the llist primitives are new, there aren't any bad users yet,
and we should avoid growing them. Heavily contended sites should
generally be better off using the ticket locks for serialization since
they provide bounded completion times (fifo-fair over the cpus).
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1315836358.26517.43.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>

Use the generic llist primitives.

We had a private lockless list implementation in the scheduler in the wake-list
code, now that we have a generic llist implementation that provides all required
operations, switch to it.

This patch is not expected to change any behavior.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1315836353.26517.42.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>

So we don't have to expose the struct list_node member.

Cc: Huang Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315836348.26517.41.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>

Use llist in irq_work instead of the lock-less linked list
implementation in irq_work to avoid the code duplication.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-6-git-send-email-ying.huang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Extend the llist_add*() functions to return a success indicator, this
allows us in the scheduler code to send an IPI if the queue was empty.

( There's no effect on existing users, because the list_add_xxx() functions
  are inline, thus this will be optimized out by the compiler if not used
  by callers. )
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-5-git-send-email-ying.huang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

If in llist_add()/etc. functions the first cmpxchg() call succeeds, it is
not necessary to use cpu_relax() before the cmpxchg(). So cpu_relax() in
a busy loop involving cmpxchg() should go after cmpxchg() instead of before
that.

This patch fixes this for all involved llist functions.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-4-git-send-email-ying.huang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Remove the nmi() checks spread around the code. in_nmi() is not available
on every architecture and it's a pretty obscure and ugly check in any case.

Cc: Huang Ying <ying.huang@intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-3-git-send-email-ying.huang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Because llist code will be used in performance critical scheduler
code path, make llist_add() and llist_del_all() inline to avoid
function calling overhead and related 'glue' overhead.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1315461646-1379-2-git-send-email-ying.huang@intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: pick up the latest fixes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 2a7fade7 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) Avoid leaving around dangling pointer
  hwmon: (coretemp) Fixup platform device ID change

* git://github.com/davem330/ide:
  ide-disk: Fix request requeuing

* 'btrfs-3.0' of git://github.com/chrismason/linux:
  Btrfs: force a page fault if we have a shorty copy on a page boundary

Simon Kirby reported that on his RAID setup with idedisk underneath
the box OOMs after a couple of days of runtime. Running with
CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally
allocates an ide_cmd struct. However, ide_requeue_and_plug() can be
called more than once per request, either from the request issue or the
IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn()
repeatedly, allocating a struct ide_cmd everytime and "forgetting" the
previous pointer.

Make sure the code reuses the old allocated chunk.
Reported-and-tested-by: NSimon Kirby <sim@hostway.ca>
Cc: <stable@kernel.org> [ 39.x, 3.0.x ]
Link: http://marc.info/?l=linux-kernel&m=131667641517919
Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.caSigned-off-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pch_gbe driver has an issue which a network stops,
when receiving traffic is high.
In the case, The link down and up are necessary to return a network.

This patch fixed this issue.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a link was downed during network use,
there is an issue on which PC freezes.

This patch fixed this issue.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a minor change.

Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS,
...) would return total and dropped packets since its last invocation. The
introduction of socket queue overflow reporting [1] changed drop
rate calculation in the normal packet socket path, but not when using a
packet ring. As a result, the getsockopt now returns different statistics
depending on the reception method used. With a ring, it still returns the
count since the last call, as counts are incremented in tpacket_rcv and
reset in getsockopt. Without a ring, it returns 0 if no drops occurred
since the last getsockopt and the total drops over the lifespan of
the socket otherwise. The culprit is this line in packet_rcv, executed
on a drop:

drop_n_acct:
        po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);

As it shows, the new drop number it taken from the socket drop counter,
which is not reset at getsockopt. I put together a small example
that demonstrates the issue [2]. It runs for 10 seconds and overflows
the queue/ring on every odd second. The reported drop rates are:
ring: 16, 0, 16, 0, 16, ...
non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74.

Note how the even ring counts monotonically increase. Because the
getsockopt adds tp_drops to tp_packets, total counts are similarly
reported cumulatively. Long story short, reinstating the original code, as
the below patch does, fixes the issue at the cost of additional per-packet
cycles. Another solution that does not introduce per-packet overhead
is be to keep the current data path, record the value of sk_drops at
getsockopt() at call N in a new field in struct packetsock and subtract
that when reporting at call N+1. I'll be happy to code that, instead,
it's just more messy.

[1] http://patchwork.ozlabs.org/patch/35665/
[2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.cSigned-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a VM is saved and restored (or migrated) the netback driver will no
longer process any Tx packets from the frontend.  xenvif_up() does not
schedule the processing of any pending Tx requests from the front end
because the carrier is off.  Without this initial kick the frontend
just adds Tx requests to the ring without raising an event (until the
ring is full).

This was caused by 47103041 (net:
xen-netback: convert to hw_features) which reordered the calls to
xenvif_up() and netif_carrier_on() in xenvif_connect().
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During a test where a pair of bonding interfaces using ARP monitoring
were both brought up and torn down (with an rmmod) repeatedly, a panic
in the timer code was noticed.  I tracked this down and determined that
any of the bonding functions that ran as workqueue handlers and requeued
more work might not properly exit when the module was removed.

There was a flag protected by the bond lock called kill_timers that is
set when the interface goes down or the module is removed, but many of
the functions that monitor link status now unlock the bond lock to take
rtnl first.  There is a chance that another CPU running the rmmod could
get the lock and set kill_timers after the first check has passed.

This patch does not allow any function to queue work that will make
itself run unless kill_timers is not set.  I also noticed while doing
this work that bond_resend_igmp_join_requests did not have a check for
kill_timers, so I added the needed call there as well.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Reported-by: NLiang Zheng <lzheng@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Apart from the obvious cleanup, this should make the line

			cursor_end = x - xorigin + w;

correct now.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes cursor disappearing prematurely when moving off a top/left edge which
is not located at the desktop top/left edge.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>