- 16 1月, 2009 11 次提交
-
-
由 Tejun Heo 提交于
pda is now a percpu variable and there's no reason it can't use plain x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace pda op implementations with wrappers around x86 percpu accessors. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] As pda is now allocated in percpu area, it can easily be made a proper percpu variable. Make it so by defining per cpu symbol from linker script and declaring it in C code for SMP and simply defining it for UP. This change cleans up code and brings SMP and UP closer a bit. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Now that pda is allocated as part of percpu, percpu doesn't need to be accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP one. Other than the segment register, operand size and the base of percpu symbols, they behave identical now. This patch replaces now unnecessary pda->data_offset with a dummy field which is necessary to keep stack_canary at its place. This patch also moves per_cpu_offset initialization out of init_gdt() into setup_per_cpu_areas(). Note that this change also necessitates explicit per_cpu_offset initializations in voyager_smp.c. With this change, x86_OP_percpu()'s are as efficient on x86_64 as on x86_32 and also x86_64 can use assembly PER_CPU macros. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
_cpu_pda array first uses statically allocated storage in data.init and then switches to allocated bootmem to conserve space. However, after folding pda area into percpu area, _cpu_pda array will be removed completely. Drop the reallocation part to simplify the code for soon-to-follow changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] CPU startup code in head_64.S loaded address of a zero page into %gs for temporary use till pda is loaded but address to the actual pda is available at the point. Load the real address directly instead. This will help unifying percpu and pda handling later on. This patch is mostly taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] This patch makes percpu symbols zerobased on x86_64 SMP by adding PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on the percpu output section and using it in vmlinux_64.lds.S. A new PHDR is added as existing ones cannot contain sections near address zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which always points to the vaddr of the loaded percpu data.init region. The following adjustments have been made to accomodate the address change. * code to locate percpu gdt_page in head_64.S is updated to add the load address to the gdt_page offset. * __per_cpu_load is used in places where access to the init data area is necessary. * pda->data_offset is initialized soon after C code is entered as zero value doesn't work anymore. This patch is mostly taken from Mike Travis' "x86_64: Base percpu variables at zero" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open coding it. This will ease future changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] * Ruggedize some calls in setup_percpu.c to prevent mishaps in early calls, particularly for non-critical functions. * Cleanup DEBUG_PER_CPU_MAPS usages and some comments. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make early_per_cpu() a lvalue as per_cpu() is and use it where applicable. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
There's no instruction to move a 64bit immediate into memory location. Drop "i". Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 1月, 2009 6 次提交
-
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
Impact: cleanup Use the proper type. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
E.g. when called due to an early panic. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Impact: widen the effect of the 'nolapic' boot parameter "nolapic" should not only suppress SMP and use of the LAPIC, but it also ought to have the effect of disabling all IO-APIC related activity as well as PCI MSI and HT-IRQs. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: fix build errors Since the SPARSE IRQS changes redefined how the kstat irqs are organized, arch's must use the new accessor function: kstat_incr_irqs_this_cpu(irq, DESC); If CONFIG_SPARSE_IRQS is set, then DESC is a pointer to the irq_desc which has a pointer to the kstat_irqs. If not, then the .irqs field of struct kernel_stat is used instead. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Thierry Vignaud reported: > http://bugzilla.kernel.org/show_bug.cgi?id=12372 > > On P4 with an SiS motherboard (video card is a SiS 651) > X server fails to start with error: > xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument) Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time. Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed) Reported-and-tested-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 1月, 2009 21 次提交
-
-
由 Yinghai Lu 提交于
Impact: clean up to be same as 64bit 32-bit is using per-cpu vector too, so don't use default NR_IRQS. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/travis/linux-2.6-cpus4096-for-ingo into cpus4096
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
This commit broke flush_tlb_others_ipi() causing boot hangs on a 16 logical cpu system: > commit 4595f962 > Author: Rusty Russell <rusty@rustcorp.com.au> > Date: Sat Jan 10 21:58:09 2009 -0800 > > x86: change flush_tlb_others to take a const struct cpumask This change resulted in sending the invalidate tlb vector to the sender itself causing the hang. flush_tlb_others_ipi() should exclude the sender itself from the destination list. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 PAT: remove CPA WARN_ON for zero pte x86 PAT: return compatible mapping to remap_pfn_range callers x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: TWL4030: fix clk API usage [ARM] 5364/1: allow flush_ioremap_region() to be used from modules [ARM] w90x900: fix build errors and warnings [ARM] i.MX add missing include [ARM] i.MX: fix breakage from commit 27889273 [ARM] i.MX: remove LCDC controller register definitions from imx-regs.h
-
由 Bernd Schmidt 提交于
Since we (Analog Devices) updated our Blackfin kernel to 2.6.28, we've seen occasional 5-second hangs from telnet. telnetd calls select with a NULL timeout, but with the new kernel, the system call occasionally returns 0, which causes telnet to call sleep (5). This did not happen with earlier kernels. The code in sys_pselect7 looks a bit strange, in particular the variable "to" is initialized to NULL, then changed if a non-null timeout was passed in, but not used further. It needs to be passed to core_sys_select instead of &end_time. This bug was introduced by 8ff3e8e8 ("select: switch select() and poll() over to hrtimers"). Signed-off-by: NBernd Schmidt <bernd.schmidt@analog.com> Reviewed-by: NUlrich Drepper <drepper@redhat.com> Tested-by: NRobin Getz <rgetz@blackfin.uclinux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Commit b430428a ("8250: Don't clobber spinlocks.") introduced a regression on the parisc architecture, which broke the handover to the serial port at boottime. early_serial_setup() was changed to only copy a subset of the uart_port fields, and sadly the "type" and "line" fields were forgotten and thus the serial port was not initialized and could not be used for a handover. This patch fixes this by copying the missing fields. As this change to early_serial_setup() doesn't need an initialized spinlock in the uart_port struct any longer, we can drop the spinlock initialization in the superio driver. Cc: David Daney <ddaney@caviumnetworks.com> Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: linux-parisc@vger.kernel.org Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Always pass a struct device if one is available; and there's really no reason for the processor specific stuff in this file if only people would follow the API usage properly by using the struct device. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
Impact: reduce scope of debug check - avoid warnings The logic to find whether identity map exists or not using high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete as the memory withing the range may not be mapped if there is a unusable hole in e820. Specifically, on my test system I started seeing these warnings with tools like hwinfo, acpidump trying to map ACPI region. [ 27.400018] ------------[ cut here ]------------ [ 27.400344] WARNING: at /home/venkip/src/linus/linux-2.6/arch/x86/mm/pageattr.c:560 __change_page_attr_set_clr+0xf3/0x8b8() [ 27.400821] Hardware name: X7DB8 [ 27.401070] CPA: called for zero pte. vaddr = ffff8800cff6a000 cpa->vaddr = ffff8800cff6a000 [ 27.401569] Modules linked in: [ 27.401882] Pid: 4913, comm: dmidecode Not tainted 2.6.28-05716-gfe0bdec6 #586 [ 27.402141] Call Trace: [ 27.402488] [<ffffffff80237c21>] warn_slowpath+0xd3/0x10f [ 27.402749] [<ffffffff80274ade>] ? find_get_page+0xb3/0xc9 [ 27.403028] [<ffffffff80274a2b>] ? find_get_page+0x0/0xc9 [ 27.403333] [<ffffffff80226425>] __change_page_attr_set_clr+0xf3/0x8b8 [ 27.403628] [<ffffffff8028ec99>] ? __purge_vmap_area_lazy+0x192/0x1a1 [ 27.403883] [<ffffffff8028eb52>] ? __purge_vmap_area_lazy+0x4b/0x1a1 [ 27.404172] [<ffffffff80290268>] ? vm_unmap_aliases+0x1ab/0x1bb [ 27.404512] [<ffffffff80290105>] ? vm_unmap_aliases+0x48/0x1bb [ 27.404766] [<ffffffff80226d28>] change_page_attr_set_clr+0x13e/0x2e6 [ 27.405026] [<ffffffff80698fa7>] ? _spin_unlock+0x26/0x2a [ 27.405292] [<ffffffff80227e6a>] ? reserve_memtype+0x19b/0x4e3 [ 27.405590] [<ffffffff80226ffd>] _set_memory_wb+0x22/0x24 [ 27.405844] [<ffffffff80225d28>] ioremap_change_attr+0x26/0x28 [ 27.406097] [<ffffffff80228355>] reserve_pfn_range+0x1a3/0x235 [ 27.406427] [<ffffffff80228430>] track_pfn_vma_new+0x49/0xb3 [ 27.406686] [<ffffffff80286c46>] remap_pfn_range+0x94/0x32c [ 27.406940] [<ffffffff8022878d>] ? phys_mem_access_prot_allowed+0xb5/0x1a8 [ 27.407209] [<ffffffff803e9bf4>] mmap_mem+0x75/0x9d [ 27.407523] [<ffffffff8028b3b4>] mmap_region+0x2cf/0x53e [ 27.407776] [<ffffffff8028b8cc>] do_mmap_pgoff+0x2a9/0x30d [ 27.408034] [<ffffffff8020f4a4>] sys_mmap+0x92/0xce [ 27.408339] [<ffffffff8020b65b>] system_call_fastpath+0x16/0x1b [ 27.408614] ---[ end trace 4b16ad70c09a602d ]--- [ 27.408871] dmidecode:4913 reserve_pfn_range ioremap_change_attr failed write-back for cff6a000-cff6b000 This is wih track_pfn_vma_new trying to keep identity map in sync. The address cff6a000 is the ACPI region according to e820. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) And is not mapped as per init_memory_mapping. [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff60000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 We can add logic to check for this. But, there can also be other holes in identity map when we have 1GB of aligned reserved space in e820. This patch handles it by removing the WARN_ON and returning a specific error value (EFAULT) to indicate that the address does not have any identity mapping. The code that tries to keep identity map in sync can ignore this error, with other callers of cpa still getting error here. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: avoid warning message, potentially solve 3D performance regression Change x86 PAT code to return compatible memtype if the exact memtype that was requested in remap_pfn_rage and friends is not available due to some conflict. This is done by returning the compatible type in pgprot parameter of track_pfn_vma_new(), and the caller uses that memtype for page table. Note that track_pfn_vma_copy() which is basically called during fork gets the prot from existing page table and should not have any conflict. Hence we use strict memtype check there and do not allow compatible memtypes. This patch fixes the bug reported here: http://marc.info/?l=linux-kernel&m=123108883716357&w=2 Specifically the error message: X:5010 map pfn expected mapping type write-back for d0000000-d0101000, got write-combining Should go away. Reported-and-bisected-by: NKevin Winchester <kjwinchester@gmail.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer. Subsequent patch changes the x86 PAT handling to return a compatible memtype in pgprot_t, if what was requested cannot be allowed due to conflicts. No fuctionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Move the new memtype old memtype allowed check to header so that is can be shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range() code path. No functionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: fix (harmless) double-free of memtype entries and avoid warning On track_pfn_vma_new() failure, reset the vm_flags so that there will be no second cleanup happening when upper level routines call unmap_vmas(). This patch fixes part of the bug reported here: http://marc.info/?l=linux-kernel&m=123108883716357&w=2 Specifically the error message: X:5010 freeing invalid memtype d0000000-d0101000 Is due to multiple frees on error path, will not happen with the patch below. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
Impact: reduce kernel image size Hugh Dickins noticed that older gcc versions when the kernel is built for code size didn't inline some of the bitops. Mark all complex x86 bitops that have more than a single asm statement or two as always inline to avoid this problem. Probably should be done for other architectures too. Ingo then found a better fix that only requires a single line change, but it unfortunately only works on gcc 4.3. On older gccs the original patch still makes a ~0.3% defconfig difference with CONFIG_OPTIMIZE_INLINING=y. With gcc 4.1 and a defconfig like build: 6116998 1138540 883788 8139326 7c323e vmlinux-oi-with-patch 6137043 1138540 883788 8159371 7c808b vmlinux-optimize-inlining ~20k / 0.3% difference. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "i386: add TRACE_IRQS_OFF for the nmi"
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: smp_call_function_single(): be slightly less stupid, fix #2 lockdep, mm: fix might_fault() annotation
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Add dependency on INFINIBAND_ADDR_TRANS IPoIB: Do not join broadcast group if interface is brought down RDMA/nes: Fix for NIPQUAD removal IPoIB: Fix loss of connectivity after bonding failover on both sides IB/mlx4: Don't register IB device for adapters with no IB ports mlx4_core: Fix warning from min() IB/ehca: spin_lock_irqsave() takes an unsigned long
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_it821x: Update RDC UDMA handling ata: fix wrong WARN_ON_ONCE
-
由 Dirk Hohndel 提交于
With some broken BIOSs when VT-d is enabled, the data structures are filled incorrectly. This can cause a NULL pointer dereference in very early boot. Signed-off-by: NDirk Hohndel <hohndel@linux.intel.com> Acked-by: NYu Zhao <yu.zhao@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2009 2 次提交
-
-
由 Alan Cox 提交于
The UDMA affliction is apparently specific to revision 0x11. Keeps us in sync with drivers/ide current. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Christian Borntraeger 提交于
This patch fixes a wrong WARN_ON that was triggered by 32bit PIO support: WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750() __atapi_pio_bytes simply doesnt know enough to decide if there is a bug. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-