New driver for NXP (Philips) UART ICs was introduced in September 2012.
Old driver no longer used anywhere, this patch removes it.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the initialisation of older Quatech serial cards which are fitted with
the AMCC PCI Matchmaker interface chip.

Signed-off-by: Jonathan Woithe (jwoithe@just42.net)
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 4d9b1090(tty: Prevent deadlock in n_gsm driver)
tried to close all the virtual ports synchronously before closing the
phycial ports, so the tty_vhangup() is used.

But the tty_unlock/lock() is wrong:
tty_release
 tty_ldisc_release
  tty_lock_pair(tty, o_tty)  < == Here the tty is for physical port
  tty_ldisc_kill
    gsmld_close
      gsm_cleanup_mux
        gsm_dlci_release
          tty = tty_port_tty_get(&dlci->port)
                            < == Here the tty(s) are for virtual port

They are different ttys, so before tty_vhangup(virtual tty), do not need
to call the tty_unlock(virtual tty) at all which causes unbalanced unlock
warning.

When enabling mutex debugging option, we will hit the below warning also:
[   99.276903] =====================================
[   99.282172] [ BUG: bad unlock balance detected! ]
[   99.287442] 3.10.20-261976-gaec5ba0 #44 Tainted: G           O
[   99.293972] -------------------------------------
[   99.299240] mmgr/152 is trying to release lock (&tty->legacy_mutex) at:
[   99.306693] [<c1b2dcad>] mutex_unlock+0xd/0x10
[   99.311669] but there are no more locks to release!
[   99.317131]
[   99.317131] other info that might help us debug this:
[   99.324440] 3 locks held by mmgr/152:
[   99.328542]  #0:  (&tty->legacy_mutex/1){......}, at: [<c1b30ab0>] tty_lock_nested+0x40/0x90
[   99.338116]  #1:  (&tty->ldisc_mutex){......}, at: [<c15dbd02>] tty_ldisc_kill+0x22/0xd0
[   99.347284]  #2:  (&gsm->mutex){......}, at: [<c15e3d83>] gsm_cleanup_mux+0x73/0x170
[   99.356060]
[   99.356060] stack backtrace:
[   99.360932] CPU: 0 PID: 152 Comm: mmgr Tainted: G           O 3.10.20-261976-gaec5ba0 #44
[   99.370086]  ef4a4de0 ef4a4de0 ef4c1d98 c1b27b91 ef4c1db8 c1292655 c1dd10f5 c1b2dcad
[   99.378921]  c1b2dcad ef4a4de0 ef4a528c ffffffff ef4c1dfc c12930dd 00000246 00000000
[   99.387754]  00000000 00000000 c15e1926 00000000 00000001 ddfa7530 00000003 c1b2dcad
[   99.396588] Call Trace:
[   99.399326]  [<c1b27b91>] dump_stack+0x16/0x18
[   99.404307]  [<c1292655>] print_unlock_imbalance_bug+0xe5/0xf0
[   99.410840]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.416110]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.421382]  [<c12930dd>] lock_release_non_nested+0x1cd/0x210
[   99.427818]  [<c15e1926>] ? gsm_destroy_network+0x36/0x130
[   99.433964]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.439235]  [<c12931a2>] lock_release+0x82/0x1c0
[   99.444505]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.449776]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.455047]  [<c1b2dc2f>] __mutex_unlock_slowpath+0x5f/0xd0
[   99.461288]  [<c1b2dcad>] mutex_unlock+0xd/0x10
[   99.466365]  [<c1b30bb1>] tty_unlock+0x21/0x50
[   99.471345]  [<c15e3dd1>] gsm_cleanup_mux+0xc1/0x170
[   99.476906]  [<c15e44d2>] gsmld_close+0x52/0x90
[   99.481983]  [<c15db905>] tty_ldisc_close.isra.1+0x35/0x50
[   99.488127]  [<c15dbd0c>] tty_ldisc_kill+0x2c/0xd0
[   99.493494]  [<c15dc7af>] tty_ldisc_release+0x2f/0x50
[   99.499152]  [<c15d572c>] tty_release+0x37c/0x4b0
[   99.504424]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.509695]  [<c1b2dcad>] ? mutex_unlock+0xd/0x10
[   99.514967]  [<c1372f6e>] ? eventpoll_release_file+0x7e/0x90
[   99.521307]  [<c1335849>] __fput+0xd9/0x200
[   99.525996]  [<c133597d>] ____fput+0xd/0x10
[   99.530685]  [<c125c731>] task_work_run+0x81/0xb0
[   99.535957]  [<c12019e9>] do_notify_resume+0x49/0x70
[   99.541520]  [<c1b30dc4>] work_notifysig+0x29/0x31
[   99.546897] ------------[ cut here ]------------

So here we can call tty_vhangup() directly which is for virtual port.
Reviewed-by: NChao Bi <chao.bi@intel.com>
Signed-off-by: NLiu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Mark the function hvc_poll_init() as static in hvc/hvc_console.c because
it is not used outside this file.

This eliminates the following warning in hvc/hvc_console.c:
drivers/tty/hvc/hvc_console.c:791:5: warning: no previous prototype for ‘hvc_poll_init’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Marks the functions gsm_cleanup_mux(), gsm_activate_mux(),
gsm_free_mux(), gsm_alloc_mux() and gsm_change_mtu() as static in
n_gsm.c because they are not used outside this file.

Also, drop the EXPORT_SYMBOL_GPL for the above mentioned functions
because nothing else in the kernel calls them.

This eliminates the following warnings in n_gsm.c:
drivers/tty/n_gsm.c:2022:6: warning: no previous prototype for ‘gsm_cleanup_mux’ [-Wmissing-prototypes]
drivers/tty/n_gsm.c:2076:5: warning: no previous prototype for ‘gsm_activate_mux’ [-Wmissing-prototypes]
drivers/tty/n_gsm.c:2120:6: warning: no previous prototype for ‘gsm_free_mux’ [-Wmissing-prototypes]
drivers/tty/n_gsm.c:2156:17: warning: no previous prototype for ‘gsm_alloc_mux’ [-Wmissing-prototypes]
drivers/tty/n_gsm.c:2714:5: warning: no previous prototype for ‘gsm_change_mtu’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When falling back from DMA to interrupt mode the receive interrupt has to
be re-enabled to catch new incoming data.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In pl011_rx_chars() if pl011_dma_rx_trigger_dma() succeeds it will disable
the receive interrupt, no need to do this again.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

During initialisation, a UART may already be in use for a console, so
take care to preserve things like baud rate and data format to avoid
corrupting console output.
Signed-off-by: NJon Medhurst <tixy@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The code to cope with a split tx/rx LCR_H register is non-trivial
so put it into it's own function to avoid duplication.
Signed-off-by: NJon Medhurst <tixy@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When the pl011 is being used for a console, pl011_console_write forces
the control register (CR) to enable the UART for transmission and then
restores this to the original value afterwards. It does this while
holding the port lock.

Unfortunately, when the uart is started or shutdown - say in response to
userland using the serial device for a terminal - then this updates the
control register without any locking.

This means we can have

  pl011_console_write   Save CR
  pl011_startup         Initialise CR, e.g. enable receive
  pl011_console_write   Restore old CR with receive not enabled

this result is a serial port which doesn't respond to any input.

A similar race in reverse could happen when the device is shutdown.

We can fix these problems by taking the port lock when updating CR.
Signed-off-by: NJon Medhurst <tixy@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 17438217 on request
of Linus Walleij:
	Greg can you please drop or revert
	commit 17438217
	"serial: pl011: use DMA RX polling by default"
	from the TTY tree until this has been sorted out?

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

readline() inadvertently triggers an error recovery path when
pastes larger than 4k overrun the line discipline buffer. The
error recovery path discards input when the line discipline buffer
is full and operating in canonical mode and no newline has been
received. Because readline() changes the termios to non-canonical
mode to read the line char-by-char, the line discipline buffer
can become full, and then when readline() restores termios back
to canonical mode for the caller, the now-full line discipline
buffer triggers the error recovery.

When changing termios from non-canon to canon mode and the read
buffer contains data, simulate an EOF push _without_ the
DISABLED_CHAR in the read buffer.

Importantly for the readline() problem, the termios can be
changed back to non-canonical mode without changes to the read
buffer occurring; ie., as if the previous termios change had not
happened (as long as no intervening read took place).

Preserve existing userspace behavior which allows '\0's already
received in non-canon mode to be read as '\0's in canon mode
(rather than trigger add'l EOF pushes or an actual EOF).

Patch based on original proposal and discussion here
https://bugzilla.kernel.org/show_bug.cgi?id=55991
by Stas Sergeev <stsp@users.sourceforge.net>
Reported-by: NMargarita Manterola <margamanterola@gmail.com>
Cc: Maximiliano Curia <maxy@gnuservers.com.ar>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Acked-by: NStas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a complex patch for refactoring CLPS711X serial driver.
Major changes:
- Eliminate <mach/hardware.h> usage.
- Devicetree support.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tty flip buffers use GFP_ATOMIC allocations for received data
which is to be processed by the line discipline. For each byte
received, an extra byte is used to indicate the error status of
that byte.

Instead, if the received data is error-free, encode the entire
buffer without status bytes.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit d7a68be4,
'tty: Only perform flip buffer flush from tty_buffer_flush()',
removed buffer flushing from flush_to_ldisc().

Fix function header comment which describes the former behavior.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up
the PM callbacks.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the loopback mode support for imx uart driver.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Making DMA RX polling optional when DMA is on was just
over-cautious: there is one single system in the kernel tree
using this facility, Ux500 and after some testing I turned
this on also for Ux500, which means it should simply be on
by default if DMA is enabled.

Cc: Jongsung Kim <neidhard.kim@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up
the PM callbacks.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ttyA has ld associated to n_gsm, when ttyA is closing, it triggers
to release gsmttyB's ld data dlci[B], then race would happen if gsmttyB
is opening in parallel.

(Note: This patch set differs from previous set in that it uses mutex
instead of spin lock to avoid race, so that it avoids sleeping in automic
context)

Here are race cases we found recently in test:

CASE #1
====================================================================
releasing dlci[B] race with gsmtty_install(gsmttyB), then panic
in gsmtty_open(gsmttyB), as below:

 tty_release(ttyA)                  tty_open(gsmttyB)
     |                                   |
   -----                           gsmtty_install(gsmttyB)
     |                                   |
   -----                    gsm_dlci_alloc(gsmttyB) => alloc dlci[B]
 tty_ldisc_release(ttyA)               -----
     |                                   |
 gsm_dlci_release(dlci[B])             -----
     |                                   |
 gsm_dlci_free(dlci[B])                -----
     |                                   |
   -----                           gsmtty_open(gsmttyB)

 gsmtty_open()
 {
     struct gsm_dlci *dlci = tty->driver_data; => here it uses dlci[B]
     ...
 }

 In gsmtty_open(gsmttyA), it uses dlci[B] which was release, so hit a panic.
=====================================================================

CASE #2
=====================================================================
releasing dlci[0] race with gsmtty_install(gsmttyB), then panic
in gsmtty_open(), as below:

 tty_release(ttyA)                  tty_open(gsmttyB)
     |                                   |
   -----                           gsmtty_install(gsmttyB)
     |                                   |
   -----                    gsm_dlci_alloc(gsmttyB) => alloc dlci[B]
     |                                   |
   -----                         gsmtty_open(gsmttyB) fail
     |                                   |
   -----                           tty_release(gsmttyB)
     |                                   |
   -----                           gsmtty_close(gsmttyB)
     |                                   |
   -----                        gsmtty_detach_dlci(dlci[B])
     |                                   |
   -----                             dlci_put(dlci[B])
     |                                   |
 tty_ldisc_release(ttyA)               -----
     |                                   |
 gsm_dlci_release(dlci[0])             -----
     |                                   |
 gsm_dlci_free(dlci[0])                -----
     |                                   |
   -----                             dlci_put(dlci[0])

 In gsmtty_detach_dlci(dlci[B]), it tries to use dlci[0] which was released,
 then hit panic.
=====================================================================

IMHO, n_gsm tty operations would refer released ldisc,  as long as
gsm_dlci_release() has chance to release ldisc data when some gsmtty operations
are ongoing..

This patch is try to avoid it by:

1) in n_gsm driver, use a global gsm mutex lock to avoid gsm_dlci_release() run in
parallel with gsmtty_install();

2) Increase dlci's ref count in gsmtty_install() instead of in gsmtty_open(), the
purpose is to prevent gsm_dlci_release() releasing dlci after gsmtty_install()
allocats dlci but before gsmtty_open increases dlci's ref count;

3) Decrease dlci's ref count in gsmtty_remove(), a tty framework API, this is the
opposite process of step 2).
Signed-off-by: NChao Bi <chao.bi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no in-tree user of tty_prepare_flip_string_flags(); remove.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Trim up the memory_used field name to mem_used.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow driver to configure its maximum flip buffer memory
consumption/limit. This is necessary for very-high speed line
rates (in excess of 10MB/sec) because the flip buffers can
be saturated before the line discipline has a chance to
throttle the input.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Most line disciplines already handle the undocumented NULL flag
ptr in their .receive_buf method; however, several don't.

Document the NULL flag ptr, and correct handling in the
N_MOUSE, N_GSM0710 and N_R394 line disciplines.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Only wakeup the _waiting_ reader, polls and/or writer(s).
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Distinguish if caller is n_tty_poll() or n_tty_read(), and
set the read/wakeup threshold accordingly.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Perform PARMRK doubling checks explicitly; remove ternary idiom
and local variable.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Although n_tty_receive_char_closing() only has one call-site,
let the compiler inline instead.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit e60d27c4,
n_tty: Factor LNEXT processing from per-char i/o path,
mistakenly inlined the non-inline alias, n_tty_receive_char(),
for the inline function, n_tty_receive_char_inline().

As n_tty_receive_char() is intended for slow-path char
processing only, un-inline it.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

N_TTY's direct and flow-controlled flavors of the .receive_buf()
method are nearly identical; fold together.
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This early amba_ports declaration was introduced by commit c16d51a3 (amba
pl011: workaround for uart registers lockup) for use in the pl011_lockup_wa()
routine. This routine was later removed by commit 4fd0690b (serial: pl011:
implement workaround for CTS clear event issue).
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI now provides stubs for the functions the driver uses.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The uart_set_options() code unconditionally initalizes the spinlock
on the port. This can cause a deadlock in some situations.

One instance that exposed the problem, was when writing to
/sys/module/kgdboc/parameters/kgdboc to use ttyS0 when the console
is already running on ttyS0. If the spinlock is re-initialized
while the lock is held due to output to the console, there
is a deadlock.

Assume the spinlock is initialized if the port is a console.
Signed-off-by: NRandy Witt <rewitt@declaratino.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When L_ECHONL is on, newlines are echoed regardless of the L_ECHO
state; if set, ensure accumulated echoes are flushed before finishing
the current input processing and before more output.

Cc: <stable@vger.kernel.org> # 3.12.x
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com
Tested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit c284ee2c.  Turns out
the locking was incorrect.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Chao Bi <chao.bi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>