- 18 4月, 2014 1 次提交
-
-
由 Bodo Stroesser 提交于
With recent changes it is possible for the timer handler to detect an idle interface and not start the timer, but the thread to start an operation at the same time. The thread will not start the timer in that instance, resulting in the timer not running. Instead, move all timer operations under the lock and start the timer in the thread if it detect non-idle and the timer is not already running. Moving under locks allows the last timeout to be set in both the thread and the timer. 'Timer is not running' means that the timer is not pending and smi_timeout() is not running. So we need a flag to detect this correctly. Also fix a few other timeout bugs: setting the last timeout when the interrupt has to be disabled and the timer started, and setting the last timeout in check_start_timer_thread possibly racing with the timer Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NBodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: David Airlie <airlied@linux.ie> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Corey Minyard <minyard@acm.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Ashley Lai <ashley@ashleylai.com> Cc: Marcel Selhorst <tpmdd@selhorst.net> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 1月, 2014 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Fix drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_parisc_probe': drivers/char/ipmi/ipmi_si_intf.c:2752:2: error: 'rv' undeclared (first use in this function) drivers/char/ipmi/ipmi_si_intf.c:2752:2: note: each undeclared identifier is reported only once for each function it appears in Introduced by commit d02b3709 ("ipmi: Cleanup error return") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2014 3 次提交
-
-
由 Corey Minyard 提交于
Return proper errors for a lot of IPMI failure cases. Also call pci_disable_device when IPMI PCI devices are removed. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xie XiuQi 提交于
Loading ipmi_si module while bmc is disconnected, we found the timeout is longer than 5 secs. Actually it takes about 3 mins and 20 secs.(HZ=250) error message as below: Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01 [...] Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ] Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs) Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ] Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100 usecs from timeout. Reported-by: NHu Shiyuan <hushiyuan@huawei.com> Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Opdenacker 提交于
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 9月, 2013 2 次提交
-
-
由 Thomas Bogendoerfer 提交于
The last line of PARISC machines (C8000, RP34x0, etc.) have a BMC for controlling temperature, fan speed and other stuff. The BMC is connected via a special bus and listed in the firmware device tree. This change adds support for these BMCs to the IPMI driver. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jordan_Hargrave@Dell.com 提交于
I'd submitted this about a year ago but it never made it upstream. The latest versions of the kernel drivers for ipmi can use ACPI to determine the type of BMC device used in the system. The following patch adds a module alias so that udev will autoload the ipmi_si driver. Signed-off-by: NJordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 5月, 2013 1 次提交
-
-
由 Corey Minyard 提交于
When the interrupt enable message returns an error, the messages are not entirely accurate nor helpful. So improve them. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 4月, 2013 1 次提交
-
-
由 Al Viro 提交于
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 2月, 2013 2 次提交
-
-
由 Corey Minyard 提交于
Add try... parameters to disable pci and platform (openfirmware) device scanning for IPMI. Also add docs for all the try... parameters. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
The configuration change building ipmi_si into the kernel precludes the use of a custom driver that can utilize more than one KCS interface, multiple IPMBs, and more than one BMC. This capability is important for fault-tolerant systems. Even if the kernel option ipmi_si.trydefaults=0 is specified, ipmi_si discovers and claims one of the KCS interfaces on a Stratus server. The inability to now prevent the kernel from managing this device is a regression from previous kernels. The regression breaks a capability fault-tolerant vendors have relied upon. To support both ACPI opregion access and the need to avoid activation of ipmi_si on some platforms, we've added two new kernel options, ipmi_si.tryacpi and ipmi_si.trydmi be added to prevent ipmi_si from initializing when these options are set to 0 on the kernel command line. With these options at the default value of 1, ipmi_si init proceeds according to the kernel default. Tested-by: NJim Paradis <jparadis@redhat.com> Signed-off-by: NRobert Evans <Robert.Evans@stratus.com> Signed-off-by: NJim Paradis <jparadis@redhat.com> Signed-off-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Cc: Olof Johansson <olof@lixom.net> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: openipmi-developer@lists.sourceforge.net Cc: platform-driver-x86@vger.kernel.org Cc: tpmdd-devel@lists.sourceforge.net Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: openipmi-developer@lists.sourceforge.net Cc: tpmdd-devel@lists.sourceforge.net Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Mattia Dongili <malattia@linux.it> Cc: Amit Shah <amit.shah@redhat.com> Cc: openipmi-developer@lists.sourceforge.net Cc: linuxppc-dev@lists.ozlabs.org Cc: cbe-oss-dev@lists.ozlabs.org Cc: platform-driver-x86@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 11月, 2012 1 次提交
-
-
由 Adam Buchbinder 提交于
"Asynchronous" is misspelled in some comments. No code changes. Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2012 1 次提交
-
-
由 Corey Minyard 提交于
The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: NSteven Hsieh <sshsieh@broadcom.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
The legacy PM callbacks provided by the IPMI PCI driver are empty routines returning 0, so they can be safely dropped. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NCorey Minyard <cminyard@mvista.com>
-
- 29 3月, 2012 4 次提交
-
-
由 Corey Minyard 提交于
Now that the the IPMI driver is using a tasklet, we can simplify the locking in the driver and get rid of the message lock. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
The IPMI driver would release a lock, deliver a message, then relock. This is obviously ugly, and this patch converts the message handler interface to use a tasklet to schedule work. This lets the receive handler be called from an interrupt handler with interrupts enabled. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Srinivas_Gowda 提交于
Call the event handler immediately after starting the next message. This change considerably decreases the IPMI transaction time (cuts off ~9ms for a single ipmitool transaction). Signed-off-by: NSrinivas_Gowda <srinivas_g_gowda@dell.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 13 1月, 2012 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 27 5月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
The ->read_proc interface is going away, convert to seq_file. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc:Corey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 5月, 2011 1 次提交
-
-
由 Grant Likely 提交于
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 24 3月, 2011 1 次提交
-
-
由 Sergey Senozhatsky 提交于
commit d2478521 ("char/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driver") introduced a section mismatch by calling __exit cleanup_ipmi_si from __devinit init_ipmi_si. Remove __exit annotation from cleanup_ipmi_si. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 3月, 2011 1 次提交
-
-
由 Doe, YiCheng 提交于
This patch fixes an issue in OpenIPMI module where sometimes an ABORT command is sent after sending an IPMI request to BMC causing the IPMI request to fail. Signed-off-by: NYiCheng Doe <yicheng.doe@hp.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Acked-by: NTom Mingarelli <thomas.mingarelli@hp.com> Tested-by: NAndy Cress <andy.cress@us.kontron.com> Tested-by: NMika Lansirine <Mika.Lansirinne@stonesoft.com> Tested-by: NBrian De Wolf <bldewolf@csupomona.edu> Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com> Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk> Acked-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 3月, 2011 1 次提交
-
-
由 Rob Herring 提交于
of_bus is deprecated in favor of the plain platform bus. This patch merges the ipmi OF driver with the existing platform driver. CONFIG_PPC_OF occurrances are removed or replaced with CONFIG_OF. Compile tested with and without CONFIG_OF. Tested OF probe and default probe cases. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 11 2月, 2011 1 次提交
-
-
由 Corey Minyard 提交于
This patch fixes an OOPS triggered when calling modprobe ipmi_si a second time after the first modprobe returned without finding any ipmi devices. This can happen if you reload the module after having the first module load fail. The driver was not deregistering from PNP in that case. Peter Huewe originally reported this patch and supplied a fix, I have a different patch based on Linus' suggestion that cleans things up a bit more. Cc: stable@kernel.org Cc: openipmi-developer@lists.sourceforge.net Reviewed-by: NPeter Huewe <peterhuewe@gmx.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 1月, 2011 1 次提交
-
-
由 Lin Ming 提交于
The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 04 1月, 2011 2 次提交
-
-
由 Rob Herring 提交于
of_address.h and of_irq.h are implicitly included on powerpc. Adding them fixes builds on non-powerpc platforms. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Rob Herring 提交于
Fixes for sdhci-of and ipmi drivers. Auditing all drivers using of_get_property did not find other occurrences likely to be used on LE platforms. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 14 12月, 2010 1 次提交
-
-
由 Zhao Yakui 提交于
The IPMI smi_watcher will be used to catch the IPMI interface as they come or go. In order to communicate with the correct IPMI device, it should be confirmed whether it is what we wanted especially on the system with multiple IPMI devices. But the new_smi callback function of smi_watcher provides very limited info(only the interface number and dev pointer) and there is no detailed info about the low level interface. For example: which mechansim registers the IPMI interface(ACPI, PCI, DMI and so on). This is to add one interface that can get more info of low-level IPMI device. For example: the ACPI device handle will be returned for the pnp_acpi IPMI device. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 10月, 2010 1 次提交
-
-
由 Corey Minyard 提交于
__init and __exit belong after the return type on functions, not before. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 10月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Unloading ipmi module can trigger following error. (if CONFIG_DEBUG_SPINLOCK=y) [ 9633.779590] BUG: spinlock bad magic on CPU#1, rmmod/7170 [ 9633.779606] lock: f41f5414, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 9633.779626] Pid: 7170, comm: rmmod Not tainted 2.6.36-rc7-11474-gb71eb1e-dirty #328 [ 9633.779644] Call Trace: [ 9633.779657] [<c13921cc>] ? printk+0x18/0x1c [ 9633.779672] [<c11a1f33>] spin_bug+0xa3/0xf0 [ 9633.779685] [<c11a1ffd>] do_raw_spin_lock+0x7d/0x160 [ 9633.779702] [<c1131537>] ? release_sysfs_dirent+0x47/0xb0 [ 9633.779718] [<c1131b78>] ? sysfs_addrm_finish+0xa8/0xd0 [ 9633.779734] [<c1394bac>] _raw_spin_lock_irqsave+0xc/0x20 [ 9633.779752] [<f99d93da>] cleanup_one_si+0x6a/0x200 [ipmi_si] [ 9633.779768] [<c11305b2>] ? sysfs_hash_and_remove+0x72/0x80 [ 9633.779786] [<f99dcf26>] ipmi_pnp_remove+0xd/0xf [ipmi_si] [ 9633.779802] [<c11f622b>] pnp_device_remove+0x1b/0x40 Fix this by initializing spinlocks in a smi_info_alloc() helper function, right after memory allocation and clearing. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Miller <davem@davemloft.net> Cc: Yinghai Lu <yinghai@kernel.org> Acked-by: NCorey Minyard <cminyard@mvista.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 9月, 2010 2 次提交
-
-
由 Yinghai Lu 提交于
When modprobe.conf has options ipmi_si type="kcs" ports=0xCA2 regspacings="4" ipmi_si can be loaded properly, but when try to unload it get: Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------ Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0() Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800 Sep 20 15:01:09 xx kernel: Unexpected driver unregister! Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf] Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G W 2.6.36-rc5-tip+ #6 Sep 20 15:01:09 xx kernel: Call Trace: Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0 Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50 Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0 Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20 Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si] Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270 Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320 Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]--- We need to check if ipmi_pnp_driver is loaded before we try to unload it. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
After d9e1b6c4 ("ipmi: fix ACPI detection with regspacing") we get [ 11.026326] ipmi_si: probing via ACPI [ 11.030019] ipmi_si 00:09: (null) regsize 1 spacing 1 irq 0 [ 11.035594] ipmi_si: Adding ACPI-specified kcs state machine on an old system with only one range for ipmi kcs range. Try to fix it by adding another res pointer. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-