- 28 6月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
On migor provide a 3.3V supply for its SD/MMC-card interfaces. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 18 5月, 2012 1 次提交
-
-
由 Paul Mundt 提交于
Migrate migor to evt2irq backed hwirq lookups. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 5月, 2012 1 次提交
-
-
由 H Hartley Sweeten 提交于
Use the default partition parser, cmdlinepart, provided by the plat_nand driver. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 13 3月, 2012 2 次提交
-
-
由 Laurent Pinchart 提交于
The struct sh_mobile_lcdc_chan_cfg platform data contains a list of video modes. Name the lcd_cfg and num_cfg fields to reflect that they describe video modes. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 12月, 2011 1 次提交
-
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 18 11月, 2011 1 次提交
-
-
由 Paul Mundt 提交于
Now that nothing is using this anymore, kill off the assignments across the board. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 11月, 2011 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
The ov772x driver only supports 8 bits per sample pixel codes, hence the OV772X_FLAG_8BIT flag has no effect. Remove it. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 7月, 2011 2 次提交
-
-
由 Jesper Juhl 提交于
Make sure that the 'static' keywork is at the beginning of declaration for arch/sh/* This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jesper Juhl 提交于
Make sure that the 'static' keywork is at the beginning of declaration for arch/sh/* This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 25 3月, 2011 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 12 1月, 2011 1 次提交
-
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure SDIO IRQs are used, announce the MMC_CAP_SDIO_IRQ capability on migor. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 23 10月, 2010 1 次提交
-
-
由 Laurent Pinchart 提交于
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, remove the module names hardcoded in platform data and pass a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the soc_camera platform data uses. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 9月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 6月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 5月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 3月, 2010 2 次提交
-
-
由 Paul Mundt 提交于
ctrl_read/writeX are deprecated, this converts them over to their __raw_read/write() counterparts. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Configure SIU port B pins and register the WM8978 audio codec. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 2月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 2月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 09 2月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 1月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 16 12月, 2009 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
After this change drivers can be further extended to not fail, if they don't get platform data, but to use defaults. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 11月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 30 10月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Add self-refresh handling code for the Migo-R board. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 10月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Convert the Migo-R board to use sh_mobile_sdhi for the SD Card connected to CN9 instead of mmc_spi. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 15 9月, 2009 1 次提交
-
-
由 Phil Edworthy 提交于
Switch to using both register sets - side A and side B for display panning. Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 8月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 8月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Add hwblk_id to Migo-R board specific on-chip sh7722 platform devices. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 17 6月, 2009 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Unify i2c camera device platform data to point to struct soc_camera_link for a smooth transition to soc-camera as a platform driver. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 6月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch adds mode pin configuration and a machvec structure to Migo-R. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 4月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
Follows the same change as per ap325rxa, which was inadvertently omitted. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 30 3月, 2009 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 10 3月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
If CONFIG_PM is set, let Migo-R LEDs show sleep states. D11 will show STATUS0 and D12 PDSTATUS. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 1月, 2009 3 次提交
-
-
由 Magnus Damm 提交于
This patch adds CN9 MMC support for MigoR using the mmc_spi driver on top of the bitbanging spi_gpio driver. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Migo-R can use ov772x camera driver in Linux 2.6.29. Therefore, soc_camera_platform setting is no longer needed. This patch removes it. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-