Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 11 7月, 2011 3 次提交
    • T
      jbd2: remove jbd2_dev_to_name() from jbd2 tracepoints · 4862fd60
      由 Theodore Ts'o 提交于 
      Using function calls in TP_printk causes perf heartburn, so print the
MAJOR/MINOR device numbers instead.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      4862fd60
    • J
      ext4: free allocated and pre-allocated blocks when check_eofblocks_fl fails · 575a1d4b
      由 Jiaying Zhang 提交于 
      Upon corrupted inode or disk failures, we may fail after we already
allocate some blocks from the inode or take some blocks from the
inode's preallocation list, but before we successfully insert the
corresponding extent to the extent tree. In this case, we should free
any allocated blocks and discard the inode's preallocated blocks
because the entries in the inode's preallocation list may be in an
inconsistent state.
Signed-off-by: NJiaying Zhang <jiayingz@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
      575a1d4b
    • M
      ext4: fix i_blocks/quota accounting when extent insertion fails · 7132de74
      由 Maxim Patlasov 提交于 
      The current implementation of ext4_free_blocks() always calls
dquot_free_block This looks quite sensible in the most cases: blocks
to be freed are associated with inode and were accounted in quota and
i_blocks some time ago.

However, there is a case when blocks to free were not accounted by the
time calling ext4_free_blocks() yet:

1. delalloc is on, write_begin pre-allocated some space in quota
2. write-back happens, ext4 allocates some blocks in ext4_ext_map_blocks()
3. then ext4_ext_map_blocks() gets an error (e.g.  ENOSPC) from
   ext4_ext_insert_extent() and calls ext4_free_blocks().

In this scenario, ext4_free_blocks() calls dquot_free_block() who, in
turn, decrements i_blocks for blocks which were not accounted yet (due
to delalloc) After clean umount, e2fsck reports something like:

> Inode 21, i_blocks is 5080, should be 5128.  Fix<y>?
because i_blocks was erroneously decremented as explained above.

The patch fixes the problem by passing the new flag
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE to ext4_free_blocks(), to request
that the dquot_free_block() call be skipped.
Signed-off-by: NMaxim Patlasov <maxim.patlasov@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
      7132de74
  3. 30 6月, 2011 1 次提交
  5. 28 6月, 2011 9 次提交
    • Y
      ext4: quiet 'unused variables' compile warnings · 9331b626
      由 Yongqiang Yang 提交于 
      Unused variables was deleted.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      9331b626
    • E
      ext4: refactor duplicated block placement code · f86186b4
      由 Eric Sandeen 提交于 
      I found that ext4_ext_find_goal() and ext4_find_near()
share the same code for returning a coloured start block
based on i_block_group.

We can refactor this into a common function so that they
don't diverge in the future.

Thanks to adilger for suggesting the new function name.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      f86186b4
    • A
      ext4: move ext4_ind_* functions from inode.c to indirect.c · dae1e52c
      由 Amir Goldstein 提交于 
      This patch moves functions from inode.c to indirect.c.
The moved functions are ext4_ind_* functions and their helpers.
Functions called from inode.c are declared extern.
Signed-off-by: NAmir Goldstein <amir73il@users.sf.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      dae1e52c
    • T
      ext4: move common truncate functions to header file · 9f125d64
      由 Theodore Ts'o 提交于 
      Move two functions that will be needed by the indirect functions to be
moved to indirect.c as well as inode.c to truncate.h as inline
functions, so that we can avoid having duplicate copies of the
function (which can be a maintenance problem) without having to expose
them as globally functions.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      9f125d64
    • T
      ext4: move __ext4_check_blockref to block_validity.c · 1f7d1e77
      由 Theodore Ts'o 提交于 
      In preparation for moving the indirect functions to a separate file,
move __ext4_check_blockref() to block_validity.c and rename it to
ext4_check_blockref() which is exported as globally visible function.

Also, rename the cpp macro ext4_check_inode_blockref() to
ext4_ind_check_inode(), to make it clear that it is only valid for use
with non-extent mapped inodes.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      1f7d1e77
    • A
      ext4: rename ext4_indirect_* funcs to ext4_ind_* · 8bb2b247
      由 Amir Goldstein 提交于 
      We are going to move all ext4_ind_* functions to indirect.c.
Before we do that, let's rename 2 functions called ext4_indirect_*
to ext4_ind_*, to keep to the naming convention.
Signed-off-by: NAmir Goldstein <amir73il@users.sf.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      8bb2b247
    • A
      ext4: split ext4_ind_truncate from ext4_truncate · ff9893dc
      由 Amir Goldstein 提交于 
      We are about to move all indirect inode functions to a new file.
Before we do that, let's split ext4_ind_truncate() out of ext4_truncate()
leaving only generic code in the latter, so we will be able to move
ext4_ind_truncate() to the new file.
Signed-off-by: NAmir Goldstein <amir73il@users.sf.net>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      ff9893dc
    • R
      ext4: fix incorrect error msg in ext4_ext_insert_index · ed7a7e16
      由 Robin Dong 提交于 
      In function ext4_ext_insert_index when eh_entries of curp is
bigger than eh_max, error messages will be printed out, but the content
is about logical and ei_block, that's incorret.
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      ed7a7e16
    • T
      jbd2: use WRITE_SYNC in journal checkpoint · d3ad8434
      由 Tao Ma 提交于 
      In journal checkpoint, we write the buffer and wait for its finish.
But in cfq, the async queue has a very low priority, and in our test,
if there are too many sync queues and every queue is filled up with
requests, the write request will be delayed for quite a long time and
all the tasks which are waiting for journal space will end with errors like:

INFO: task attr_set:3816 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
attr_set      D ffff880028393480     0  3816      1 0x00000000
 ffff8802073fbae8 0000000000000086 ffff8802140847c8 ffff8800283934e8
 ffff8802073fb9d8 ffffffff8103e456 ffff8802140847b8 ffff8801ed728080
 ffff8801db4bc080 ffff8801ed728450 ffff880028393480 0000000000000002
Call Trace:
 [<ffffffff8103e456>] ? __dequeue_entity+0x33/0x38
 [<ffffffff8103caad>] ? need_resched+0x23/0x2d
 [<ffffffff814006a6>] ? thread_return+0xa2/0xbc
 [<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
 [<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
 [<ffffffff81400d31>] __mutex_lock_common+0x14e/0x1a9
 [<ffffffffa021dbfb>] ? brelse+0x13/0x15 [ext4]
 [<ffffffff81400ddb>] __mutex_lock_slowpath+0x19/0x1b
 [<ffffffff81400b2d>] mutex_lock+0x1b/0x32
 [<ffffffffa01f927b>] __jbd2_journal_insert_checkpoint+0xe3/0x20c [jbd2]
 [<ffffffffa01f547b>] start_this_handle+0x438/0x527 [jbd2]
 [<ffffffff8106f491>] ? autoremove_wake_function+0x0/0x3e
 [<ffffffffa01f560b>] jbd2_journal_start+0xa1/0xcc [jbd2]
 [<ffffffffa02353be>] ext4_journal_start_sb+0x57/0x81 [ext4]
 [<ffffffffa024a314>] ext4_xattr_set+0x6c/0xe3 [ext4]
 [<ffffffffa024aaff>] ext4_xattr_user_set+0x42/0x4b [ext4]
 [<ffffffff81145adb>] generic_setxattr+0x6b/0x76
 [<ffffffff81146ac0>] __vfs_setxattr_noperm+0x47/0xc0
 [<ffffffff81146bb8>] vfs_setxattr+0x7f/0x9a
 [<ffffffff81146c88>] setxattr+0xb5/0xe8
 [<ffffffff81137467>] ? do_filp_open+0x571/0xa6e
 [<ffffffff81146d26>] sys_fsetxattr+0x6b/0x91
 [<ffffffff81002d32>] system_call_fastpath+0x16/0x1b

So this patch tries to use WRITE_SYNC in __flush_batch so that the request will
be moved into sync queue and handled by cfq timely. We also use the new plug,
sot that all the WRITE_SYNC requests can be given as a whole when we unplug it.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Reported-by: NRobin Dong <sanbai@taobao.com>
      d3ad8434
  7. 22 6月, 2011 1 次提交
  9. 21 6月, 2011 13 次提交
  11. 20 6月, 2011 13 次提交