when the second, third... probe is registered, its format is
not checked, this patch fixes it.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Turn marker synchronize unregister into a static inline. There is no
reason to keep it as a macro over a static inline.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Lai Jiangshan discovered a reentrancy issue with markers and fixed it by
adding synchronize_sched() calls at each registration/unregistraiton.

It works, but it removes the ability to do batch
registration/unregistration and can cause registration of ~100 markers
to take about 30 seconds on a loaded machine (synchronize_sched() is
much slower on such workloads).

This patch implements a version of the fix which won't slow down marker batch
registration/unregistration. It also go back to the original non-synchronized
reg/unreg.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We need a marker_synchronize_unregister() before the end of exit() to make sure
every probe callers have exited the non preemptible section and thus are not
executing the probe code anymore.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Document the need for a marker_synchronize_unregister() before the end of
exit() to make sure every probe callers have exited the non preemptible
section and thus are not executing the probe code anymore.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Need a marker_synchronize_unregister() before the end of exit() to make sure
every probe callers have exited the non preemptible section and thus are not
executing the probe code anymore.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the new rcu_read_lock_sched/unlock_sched() in marker code around the call
site instead of preempt_disable/enable(). It helps reviewing the code more
easily.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create marker_synchronize_unregister() which must be called before the end of
exit() to make sure every probe callers have exited the non preemptible section
and thus are not executing the probe code anymore.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The tracepoints had the same problem markers did have wrt reentrancy. Apply a
similar fix using a rcu_barrier after each tracepoint mutex lock.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make tracepoints use rcu sched. (cleanup)
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

unregister bug:

codes using makers are typically calling marker_probe_unregister()
and then destroying the data that marker_probe_func needs(or
unloading this module). This is bug when the corresponding
marker_probe_func is still running(on other cpus),
it is using the destroying/ed data.

we should call synchronize_sched() after marker_update_probes().

reenter bug:

marker_probe_register(), marker_probe_unregister() and
marker_probe_unregister_private_data() are not reentrant safe
functions. these 3 functions release markers_mutex and then
require it again and do "entry->oldptr = old; ...", but entry->oldptr
maybe is using now for these 3 functions may reenter when markers_mutex
is released.

we use synchronize_sched() instead of call_rcu_sched() to fix
this bug. actually we can do:
"
if (entry->rcu_pending)
		rcu_barrier_sched();
"
after require markers_mutex again. but synchronize_sched()
is better and simpler. For these 3 functions are not critical path.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With latest -tip I get this bug:

[   49.439988] in_atomic():0, irqs_disabled():1
[   49.440118] INFO: lockdep is turned off.
[   49.440118] Pid: 2814, comm: modprobe Tainted: G        W 2.6.27-rc7 #4
[   49.440118]  [<c01215e1>] __might_sleep+0xe1/0x120
[   49.440118]  [<c01148ea>] ftrace_modify_code+0x2a/0xd0
[   49.440118]  [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[   49.440118]  [<c016e80e>] __ftrace_update_code+0xfe/0x2f0
[   49.440118]  [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[   49.440118]  [<c016f190>] ftrace_convert_nops+0x50/0x80
[   49.440118]  [<c016f1d6>] ftrace_init_module+0x16/0x20
[   49.440118]  [<c015498b>] load_module+0x185b/0x1d30
[   49.440118]  [<c01767a0>] ? find_get_page+0x0/0xf0
[   49.440118]  [<c02463c0>] ? sprintf+0x0/0x30
[   49.440118]  [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350
[   49.440118]  [<c0154eb3>] sys_init_module+0x53/0x1b0
[   49.440118]  [<c0352340>] ? do_page_fault+0x0/0x740
[   49.440118]  [<c0104012>] syscall_call+0x7/0xb
[   49.440118]  =======================

It is because ftrace_modify_code() calls copy_to_user and
copy_from_user.
These functions have been inserted after guessing that there
couldn't be any race condition but copy_[to/from]_user might
sleep and __ftrace_update_code is called with local_irq_saved.

These function have been inserted since this commit:
d5e92e8978fd2574e415dc2792c5eb592978243d:
"ftrace: x86 use copy from user function"
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Could just as easily change the three casts to cast to the correct
type...this patch changes the type of ftrace_nop instead.

Supresses sparse warnings:

 arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness)
 arch/x86/kernel/ftrace.c:157:14:    expected long *static [toplevel] ftrace_nop
 arch/x86/kernel/ftrace.c:157:14:    got unsigned long *<noident>
 arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness)
 arch/x86/kernel/ftrace.c:161:14:    expected long *static [toplevel] ftrace_nop
 arch/x86/kernel/ftrace.c:161:14:    got unsigned long *<noident>
 arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness)
 arch/x86/kernel/ftrace.c:165:14:    expected long *static [toplevel] ftrace_nop
 arch/x86/kernel/ftrace.c:165:14:    got unsigned long *<noident>
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With the recent updates to ftrace, there should not be any failures when
modifying the code. If there is, then we need to warn about it.

This patch has a cleaned up version of the code that I used to discover
that the weak symbols were causing failures.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace "none" tracer by the recently created "nop" tracer.
Both are pretty similar except that nop accepts TRACE_PRINT
or TRACE_SPECIAL entries.

And as a consequence, changing the size of the ring buffer now
requires that tracing has already been disabled.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that the nop tracer is used as the default tracer by
replacing the "none" tracer, tracing engine depends on it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If nop tracer is selected, some old entries from the previous tracer
could still be enqueued. Tracing have to be reset.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The functions are already 'extern' anyway, so there's no problem
with linkage. Removing these ifdefs also helps find any potential
compiler errors.

Suggested by Andrew Morton.
Signed-off-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This
patch eliminates that warning.
Signed-off-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A no-op tracer which can serve two purposes:

 1. A template for development of a new tracer.
 2. A convenient way to see ftrace_printk() calls without
    an irrelevant trace making the output messy.

[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring
buffer. The related file operations are derived from code by Frédéric
Weisbecker <fweisbec@gmail.com>.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

trace_vprintk() for easier implementation of tracer specific *_printk
functions. Add check check for no_tracer, and implement
__ftrace_printk() as a wrapper.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This must be brown paper bag week for Steven Rostedt!

While working on ftrace for PPC, I discovered that the hash locking done
when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect.

With a cut and paste error, I had the hash lock macro to lock for both
hash_lock _and_ hash_unlock!

This bug did not affect x86 since this bug was introduced when
CONFIG_FTRACE_MCOUNT_RECORD was added to x86.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ftrace_release is necessary for all uses of dynamic ftrace and not just
the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

make most of the tracers depend on DEBUG_KERNEL - that's their intended
purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is
not a practical limitation - but it simplifies the tracing menu in the
normal case)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While profiling the smp behaviour of the scheduler it was needed to know to
which cpu a task got woken.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently ftrace_printk only works with the ftrace tracer, switch it to an
iter_ctrl setting so we can make us of them with other tracers too.

[rostedt@redhat.com: tweak to the disable condition]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

An item in the trace buffer that is bigger than one entry may be split
up using the TRACE_CONT entry. This makes it a virtual single entry.
The current code increments the iterator index even while traversing
TRACE_CONT entries, making it look like the iterator is further than
it actually is.

This patch adds code to not increment the iterator index while skipping
over TRACE_CONT entries.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Peter Zijlstra provided me with a nice brown paper bag while letting me know
that I was doing a logical AND and not a binary one, making a condition
true more often than it should be.

Luckily, a false true is handled by the calling function and no harm is
done. But this needs to be fixed regardless.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently some of the ftrace output goes skewiff if you have more
than 9 cpus, and some if you have more than 99.

Twiddle with the headers and format strings to make up to 999 cpus
display without causing spacing problems.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds indexes into the stack that the functions in the
stack dump were found at. As an added bonus, I also added a diff
to show which function is the most notorious consumer of the stack.

The output now looks like this:

# cat /debug/tracing/stack_trace
        Depth   Size      Location    (48 entries)
        -----   ----      --------
  0)     2476     212   blk_recount_segments+0x39/0x59
  1)     2264      12   bio_phys_segments+0x16/0x1d
  2)     2252      20   blk_rq_bio_prep+0x23/0xaf
  3)     2232      12   init_request_from_bio+0x74/0x77
  4)     2220      56   __make_request+0x294/0x331
  5)     2164     136   generic_make_request+0x34f/0x37d
  6)     2028      56   submit_bio+0xe7/0xef
  7)     1972      28   submit_bh+0xd1/0xf0
  8)     1944     112   block_read_full_page+0x299/0x2a9
  9)     1832       8   blkdev_readpage+0x14/0x16
 10)     1824      28   read_cache_page_async+0x7e/0x109
 11)     1796      16   read_cache_page+0x11/0x49
 12)     1780      32   read_dev_sector+0x3c/0x72
 13)     1748      48   read_lba+0x4d/0xaa
 14)     1700     168   efi_partition+0x85/0x61b
 15)     1532      72   rescan_partitions+0x10e/0x266
 16)     1460      40   do_open+0x1c7/0x24e
 17)     1420     292   __blkdev_get+0x79/0x84
 18)     1128      12   blkdev_get+0x12/0x14
 19)     1116      20   register_disk+0xd1/0x11e
 20)     1096      28   add_disk+0x34/0x90
 21)     1068      52   sd_probe+0x2b1/0x366
 22)     1016      20   driver_probe_device+0xa5/0x120
 23)      996       8   __device_attach+0xd/0xf
 24)      988      32   bus_for_each_drv+0x3e/0x68
 25)      956      24   device_attach+0x56/0x6c
 26)      932      16   bus_attach_device+0x26/0x4d
 27)      916      64   device_add+0x380/0x4b4
 28)      852      28   scsi_sysfs_add_sdev+0xa1/0x1c9
 29)      824     160   scsi_probe_and_add_lun+0x919/0xa2a
 30)      664      36   __scsi_add_device+0x88/0xae
 31)      628      44   ata_scsi_scan_host+0x9e/0x21c
 32)      584      28   ata_host_register+0x1cb/0x1db
 33)      556      24   ata_host_activate+0x98/0xb5
 34)      532     192   ahci_init_one+0x9bd/0x9e9
 35)      340      20   pci_device_probe+0x3e/0x5e
 36)      320      20   driver_probe_device+0xa5/0x120
 37)      300      20   __driver_attach+0x3f/0x5e
 38)      280      36   bus_for_each_dev+0x40/0x62
 39)      244      12   driver_attach+0x19/0x1b
 40)      232      28   bus_add_driver+0x9c/0x1af
 41)      204      28   driver_register+0x76/0xd2
 42)      176      20   __pci_register_driver+0x44/0x71
 43)      156       8   ahci_init+0x14/0x16
 44)      148     100   _stext+0x42/0x122
 45)       48      20   kernel_init+0x175/0x1dc
 46)       28      28   kernel_thread_helper+0x7/0x10

The first column is simply an index starting from the inner most function
and counting down to the outer most.

The next column is the location that the function was found on the stack.

The next column is the size of the stack for that function.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The warning messages about old objcopy and local functions spam the
user quite drastically.  Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The mcount record method of ftrace scans objdump for references to mcount.
Using mcount as the reference to test if the calls to mcount being replaced
are indeed calls to mcount, this use of mcount was also caught as a
location to change. Using a variable that points to the mcount address
moves this reference into the data section that is not scanned, and
we do not use a false location to try and modify.

The warn on code was what was used to detect this bug.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.

You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.

For example:

# cat /debug/tracing/stack_max_size
1856

# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26

I've tested this on both x86_64 and i386.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>