- 16 11月, 2016 1 次提交
-
-
由 He Chen 提交于
cpuid_regs is defined multiple times as structure and enum. Rename the enum and move all of it to processor.h so we don't end up with more instances. Rename the misnomed register enumeration from CR_* to the obvious CPUID_*. [ tglx: Rewrote changelog ] Signed-off-by: NHe Chen <he.chen@linux.intel.com> Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Luwei Kang <luwei.kang@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Piotr Luc <Piotr.Luc@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1478856336-9388-2-git-send-email-he.chen@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 15 9月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
Because sched.h and thread_info.h are a tangled mess, I turned in_compat_syscall() into a macro. If we had current_thread_struct() or similar and we could use it from thread_info.h, then this would be a bit cleaner. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ccc8a1b2f41f9c264a41f771bb4a6539a642ad72.1473801993.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 8月, 2016 2 次提交
-
-
由 Brian Gerst 提交于
thread_saved_pc() was using a completely bogus method to get the return address. Since switch_to() was previously inlined, there was no sane way to know where on the stack the return address was stored. Now with the frame of a sleeping thread well defined, this can be implemented correctly. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471106302-10159-7-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Brian Gerst 提交于
Move the low-level context switch code to an out-of-line asm stub instead of using complex inline asm. This allows constructing a new stack frame for the child process to make it seamlessly flow to ret_from_fork without an extra test and branch in __switch_to(). It also improves code generation for __schedule() by using the C calling convention instead of clobbering all registers. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471106302-10159-5-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 7月, 2016 3 次提交
-
-
由 Andy Lutomirski 提交于
struct thread_info is a legacy mess. To prepare for its partial removal, move thread_info::addr_limit out. As an added benefit, this way is simpler. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/15bee834d09402b47ac86f2feccdf6529f9bc5b0.1468527351.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Rename it to match the thread_struct::uaccess_err pattern and also because it was too long. Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
struct thread_info is a legacy mess. To prepare for its partial removal, move the uaccess control fields out -- they're straightforward. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d0ac4d01c8e4d4d756264604e47445d5acc7900e.1468527351.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 6月, 2016 2 次提交
-
-
由 Fenghua Yu 提交于
x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size' User space uses standard format xsave area. fpstate in signal frame should have standard format size. To explicitly distinguish between xstate size in kernel space and the one in user space, we rename 'xstate_size' to 'fpu_kernel_xstate_size'. Cleanup only, no change in functionality. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> [ Rebased the patch and cleaned up the naming. ] Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2ecbae347a5152d94be52adf7d0f3b7305d90d99.1463760376.git.yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Fenghua Yu 提交于
The kernel xstate area can be in standard or compacted format; it is always in standard format for user mode. When XSAVES is enabled, the kernel uses the compacted format and it is necessary to use a separate fpu_user_xstate_size for signal/ptrace frames. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> [ Rebased the patch and cleaned up the naming. ] Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8756ec34dabddfc727cda5743195eb81e8caf91c.1463760376.git.yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 4月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
Unlike ds and es, these are base addresses, not selectors. Rename them so their meaning is more obvious. On x86_32, the field is still called fs. Fixing that could make sense as a future cleanup. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/69a18a51c4cba0ce29a241e570fc618ad721d908.1461698311.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 4月, 2016 2 次提交
-
-
由 Luis R. Rodriguez 提交于
Now that all previous paravirt_enabled() uses were replaced with proper x86 semantics by the previous patches we can remove the unused paravirt_enabled() mechanism. Signed-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Acked-by: NJuergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-15-git-send-email-mcgrof@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Luis R. Rodriguez 提交于
We have 4 types of x86 platforms that disable RTC: * Intel MID * Lguest - uses paravirt * Xen dom-U - uses paravirt * x86 on legacy systems annotated with an ACPI legacy flag We can consolidate all of these into a platform specific legacy quirk set early in boot through i386_start_kernel() and through x86_64_start_reservations(). This deals with the RTC quirks which we can rely on through the hardware subarch, the ACPI check can be dealt with separately. For Xen things are bit more complex given that the @X86_SUBARCH_XEN x86_hardware_subarch is shared on for Xen which uses the PV path for both domU and dom0. Since the semantics for differentiating between the two are Xen specific we provide a platform helper to help override default legacy features -- x86_platform.set_legacy_features(). Use of this helper is highly discouraged, its only purpose should be to account for the lack of semantics available within your given x86_hardware_subarch. As per 0-day, this bumps the vmlinux size using i386-tinyconfig as follows: TOTAL TEXT init.text x86_early_init_platform_quirks() +70 +62 +62 +43 Only 8 bytes overhead total, as the main increase in size is all removed via __init. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: NJuergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-5-git-send-email-mcgrof@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 3月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
It is cpu_core_id anyway. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1458917557-8757-3-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 3月, 2016 2 次提交
-
-
由 Andy Lutomirski 提交于
The first instruction of the SYSENTER entry runs on its own tiny stack. That stack can be used if a #DB or NMI is delivered before the SYSENTER prologue switches to a real stack. We have code in place to prevent us from overflowing the tiny stack. For added paranoia, add a canary to the stack and check it in do_debug() -- that way, if something goes wrong with the #DB logic, we'll eventually notice. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/6ff9a806f39098b166dc2c41c1db744df5272f29.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
The SYSENTER stack is only used on 32-bit kernels. Remove it on 64-bit kernels. ( We may end up using it down the road on 64-bit kernels. If so, we'll re-enable it for CONFIG_IA32_EMULATION. ) Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9dbd18429f9ff61a76b6eda97a9ea20510b9f6ba.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
For per package oriented services we must be able to rely on the number of CPU packages to be within bounds. Create a tracking facility, which - calculates the number of possible packages depending on nr_cpu_ids after boot - makes sure that the package id is within the number of possible packages. If the apic id is outside we map it to a logical package id if there is enough space available. Provide interfaces for drivers to query the mapping and do translations from physcial to logical ids. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20160222221011.541071755@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 2月, 2016 1 次提交
-
-
由 Dmitry Vyukov 提交于
thread_saved_pc() reads stack of a potentially running task. This can cause false KASAN stack-out-of-bounds reports, because the running task concurrently poisons and unpoisons own stack. The same happens in get_wchan(), and get get_wchan() was fixed by using READ_ONCE_NOCHECK(). Do the same here. Example KASAN report triggered by sysrq-t: BUG: KASAN: out-of-bounds in sched_show_task+0x306/0x3b0 at addr ffff880043c97c18 Read of size 8 by task syz-executor/23839 [...] page dumped because: kasan: bad access detected [...] Call Trace: [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff813e7a26>] sched_show_task+0x306/0x3b0 [<ffffffff813e7bf4>] show_state_filter+0x124/0x1a0 [<ffffffff82d2ca00>] fn_show_state+0x10/0x20 [<ffffffff82d2cf98>] k_spec+0xa8/0xe0 [<ffffffff82d3354f>] kbd_event+0xb9f/0x4000 [<ffffffff843ca8a7>] input_to_handler+0x3a7/0x4b0 [<ffffffff843d1954>] input_pass_values.part.5+0x554/0x6b0 [<ffffffff843d29bc>] input_handle_event+0x2ac/0x1070 [<ffffffff843d3a47>] input_inject_event+0x237/0x280 [<ffffffff843e8c28>] evdev_write+0x478/0x680 [<ffffffff817ac653>] __vfs_write+0x113/0x480 [<ffffffff817ae0e7>] vfs_write+0x167/0x4a0 [<ffffffff817b13d1>] SyS_write+0x111/0x220 Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: glider@google.com Cc: kasan-dev@googlegroups.com Cc: kcc@google.com Cc: linux-kernel@vger.kernel.org Cc: ryabinin.a.a@gmail.com Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 30 1月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
Move them to a separate header and have the following dependency: x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h This makes it easier to use the header in asm code and not include the whole cpufeature.h and add guards for asm. Suggested-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 12月, 2015 1 次提交
-
-
由 David Vrabel 提交于
Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 9月, 2015 1 次提交
-
-
由 Denys Vlasenko 提交于
On x86, cpu_relax() simply calls rep_nop(), which generates one instruction, PAUSE (aka REP NOP). With this config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os gcc-4.7.2 does not always inline rep_nop(): it generates several copies of this: <rep_nop> (16 copies, 194 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f3 90 pause 5d pop %rbp c3 retq See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 This patch fixes this via s/inline/__always_inline/ on rep_nop() and cpu_relax(). ( Forcing inlining only on rep_nop() causes GCC to deinline cpu_relax(), with almost no change in generated code). text data bss dec hex filename 88118971 19905208 36421632 144445811 89c1173 vmlinux.before 88118139 19905208 36421632 144444979 89c0e33 vmlinux Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443096149-27291-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 9月, 2015 1 次提交
-
-
由 Ingo Molnar 提交于
Now that all type definitions are in the UAPI header, include it directly, instead of through <asm/sigcontext.h>. [ We still keep asm/sigcontext.h, so that uapi/asm/sigcontext32.h can include <asm/sigcontext.h>. ] Acked-by: NMikko Rapeli <mikko.rapeli@iki.fi> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1441438363-9999-16-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 31 7月, 2015 1 次提交
-
-
由 Brian Gerst 提交于
Allocate a separate structure for the vm86 fields. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438148483-11932-2-git-send-email-brgerst@gmail.com [ Build fixes. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 7月, 2015 3 次提交
-
-
由 Paolo Pisati 提交于
The kernel does not support the MCA bus anymroe, so mark sys_desc_table as obsolete: remove any reference from the code together with the remaining of MCA logic. bloat-o-meter output: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-55 (-55) function old new delta i386_start_kernel 128 119 -9 setup_arch 1421 1375 -46 Signed-off-by: NPaolo Pisati <p.pisati@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437409430-8491-1-git-send-email-p.pisati@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Brian Gerst 提交于
Move the userspace accesses down into the common function in preparation for the next set of patches. Also change to copying the fields explicitly instead of assuming a fixed order in pt_regs and the kernel data structures. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437354550-25858-4-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Brian Gerst 提交于
There is no need to save FS and non-lazy GS outside the 32-bit regs. Lazy GS still needs to be saved because it wasn't saved on syscall entry. Save it in the gs slot of regs32, which is present but unused. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437354550-25858-2-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 7月, 2015 1 次提交
-
-
由 Dave Hansen 提交于
The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance). Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork(). The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 6月, 2015 1 次提交
-
-
由 Aravind Gopalakrishnan 提交于
Stash the number of nodes in a physical processor package locally and add an accessor to be called by interested parties. The first user is the MCE injection module which uses it to find the node base core in a package for injecting a certain type of errors. Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Rewrote the commit message, merged it with the accessor patch and unified naming. ] Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mchehab@osg.samsung.com Link: http://lkml.kernel.org/r/1433868317-18417-2-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 6月, 2015 1 次提交
-
-
由 Dave Hansen 提交于
The MPX code can only work on the current task. You can not, for instance, enable MPX management in another process or thread. You can also not handle a fault for another process or thread. Despite this, we pass a task_struct around prolifically. This patch removes all of the task struct passing for code paths where the code can not deal with another task (which turns out to be all of them). This has no functional changes. It's just a cleanup. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave@sr71.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bp@alien8.de Link: http://lkml.kernel.org/r/20150607183702.6A81DA2C@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 25 5月, 2015 1 次提交
-
-
由 Ingo Molnar 提交于
On most configs task-struct is cache line aligned, which makes the XSAVE area's 64-byte required alignment work out fine. But on some .config's task_struct is aligned only to 16 bytes (enforced by ARCH_MIN_TASKALIGN), which makes things like fpu__copy() (that XSAVEOPT uses) not work so well. I broke this in: 7366ed77 ("x86/fpu: Simplify FPU handling by embedding the fpstate in task_struct (again)") which embedded the fpstate in the task_struct. The alignment requirements of the FPU code were originally present in ARCH_MIN_TASKALIGN, which still has a value of 16, which was the alignment requirement of the FPU state area prior XSAVE. But this link was not documented (and not required) and the link got lost when the FPU state area was made dynamic years ago. With XSAVEOPT the minimum alignment requirment went up to 64 bytes, and the embedding of the FPU state area in task_struct exposed it again - and '16' was not increased to '64'. So fix this bug, but also try to address the underlying lost link of information that made it easier to happen: - document ARCH_MIN_TASKALIGN a bit better - use alignof() to recover the current alignment requirements. This would work in the future as well, should the alignment requirements go up to 128 bytes with things like AVX512. ( We should probably also use the vSMP alignment rules for all of x86, but that's for another patch. ) Reported-by: NPeter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 5月, 2015 8 次提交
-
-
由 Ingo Molnar 提交于
Now that fpu__detect() has become an empty layer around fpu__init_system(), eliminate it and make fpu__init_system() the main system initialization routine. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Introduce a simple fpu->fpstate_active flag in the fpu context data structure and use that instead of PF_USED_MATH in task->flags. Testing for this flag byte should be slightly more efficient than testing a bit in a bitmask, but the main advantage is that most FPU functions can now be performed on a 'struct fpu' alone, they don't need access to 'struct task_struct' anymore. There's a slight linecount increase, mostly due to the 'fpu' local variables and due to extra comments. The local variables will go away once we move most of the FPU methods to pure 'struct fpu' parameters. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
It's now local to fpu/core.c, make it static. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Use fpstate_free() directly to manage FPU state. Only process.c was using this method, so this is a speedup as well, as it removes the extra function call and related clobbers. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Move the FPU details to asm/fpu_types.h, to further factor out the FPU code. ( As an added bonus, the 'struct orig_ist' definition now moves next to its other data types - the FPU definitions were slapped in the middle of them for some mysterious reason. ) No code changed. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
This was pretty hard to read, improve it. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
This field is kept separate from the main FPU state structure for no good reason. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Use the fpu__*() namespace to organize FPU ops better. Also document fpu__detect() a bit. Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 4月, 2015 1 次提交
-
-
由 Andy Lutomirski 提交于
We write a stack pointer to MSR_IA32_SYSENTER_ESP exactly once, and we unnecessarily cache the value in tss.sp1. We never read the cached value. Remove all of the caching. It serves no purpose. Suggested-by: NDenys Vlasenko <dvlasenk@redhat.com> Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/05a0163eb33ef5208363f0015496855da7cebadd.1428002830.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 17 3月, 2015 2 次提交
-
-
由 Ingo Molnar 提交于
Nothing uses thread_struct::usersp anymore, so remove it. Originally-from: Denys Vlasenko <dvlasenk@redhat.com> Tested-by: NBorislav Petkov <bp@alien8.de> Acked-by: NBorislav Petkov <bp@alien8.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Remove all manipulations of PER_CPU(old_rsp) in C code: - it is not used on SYSRET return anymore, and system entries are atomic, so updating it from the fork and context switch paths is pointless. - Tweak a few related comments as well: we no longer have a "partial stack frame" on entry, ever. Based on (split out of) patch from Denys Vlasenko. Originally-from: Denys Vlasenko <dvlasenk@redhat.com> Tested-by: NBorislav Petkov <bp@alien8.de> Acked-by: NBorislav Petkov <bp@alien8.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426599779-8010-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-