The loop forgot to walk the net->mc_list list, so only the first
multicast address was programmed into the hash table.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

If "location" is > "addr_len" bits, the high bits of location would interfere
with the READ_CMD sent to the eeprom controller.

A patch was submitted to bug:
    http://bugzilla.kernel.org/show_bug.cgi?id=4420

which simply truncated the "location", read whatever was in "location
modulo addr_len", and returned that value. That avoids confusing the
eeprom but seems like the wrong solution to me.

Correct would be to not read beyond "1 << addr_len" address of the eeprom.
I am submitting two changes to implement this:
1) tulip_read_eeprom will return zero (since we can't return -EINVAL)
   if this is attempted (defensive programming).
2) In tulip_core.c, fix the tulip_read_eeprom caller so they don't
   iterate past addr_len bits and make sure the entire tp->eeprom[]
   array is cleared.

I konw we don't strictly need both. I would prefer both in the tree
since it documents the issue and provides a second "defense" from
the bug from creeping back in.
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

LLC currently allows users to inject raw frames, including IP packets
encapsulated in SNAP. While Linux doesn't handle IP over SNAP, other
systems do. Restrict LLC sockets to root similar to packet sockets.

[ Modified Patrick's patch to use CAP_NEW_RAW --DaveM ]
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a lockdep report.

Since ->poll() can be invoked from netpoll with interrupts
disabled, we must not unconditionally enable interrupts
in napi_complete().

Instead we must use local_irq_{save,restore}().

Noticed by Peter Zijlstra:

<irqs disabled>

  netpoll_poll()
    poll_napi()
      spin_trylock(&napi->poll_lock)
      poll_one_napi()
        napi->poll() := sky2_poll()
          napi_complete()
            local_irq_disable()
            local_irq_enable() <--- *BUG*

  <irq>
    irq_exit()
      do_softirq()
        net_rx_action()
          spin_lock(&napi->poll_lock) <--- Deadlock!

Because we still hold the lock....
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This elliminates infamous race during module loading when one could lookup
proc entry without proc_fops assigned.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ESP does not account for the IV size when calling pskb_may_pull() to
ensure everything it accesses directly is within the linear part of a
potential fragment. This results in a BUG() being triggered when the
both the IPv4 and IPv6 ESP stack is fed with an skb where the first
fragment ends between the end of the esp header and the end of the IV.

This bug was found by Dirk Nehring <dnehring@gmx.net> .
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some hardware never seem to accept the "goto sleep" command, since the legacy
drivers don't have suspend and resume handlers the entire code for it was
basically a educated guess (based on the "enable radio" code).
This patch will only print a warning when the "goto sleep" command fails, and
just continues as usual. Perhaps that means the device will not reach a sleep
state and consumes more power then it should, but it is equally possible it
simply needs some seconds longer to sleep. Anyway, by making the command
non-fatal it will not block the rest of the suspend procedure.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In commit e6bafba5, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.

This is not tested and clearly changes the semantics, so it is only
something to consider.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E1,E2; @@
(
  !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Guy Cohen <guy.cohen@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a bug detected by CONFIG_DEBUG_SPINLOCK:

if_cs_get_int_status() is only called from lbs_thread(), via
priv->hw_get_int_status. However, lbs_thread() has already taken the
priv->driver_lock. So it's a fault to take the same lock again here.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The IPv6 BEET output function is incorrectly including the inner
header in the payload to be protected.  This causes a crash as
the packet doesn't actually have that many bytes for a second
header.

The IPv4 BEET output on the other hand is broken when it comes
to handling an inner IPv6 header since it always assumes an
inner IPv4 header.

This patch fixes both by making sure that neither BEET output
function touches the inner header at all.  All access is now
done through the protocol-independent cb structure.  Two new
attributes are added to make this work, the IP header length
and the IPv4 option length.  They're filled in by the inner
mode's output function.

Thanks to Joakim Koskela for finding this problem.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 8b7817f3 ([IPSEC]: Add ICMP host
relookup support) introduced some dst leaks on error paths: the rt
pointer can be forgotten to be put. Fix it bu going to a proper label.

Found after net namespace's lo refused to unregister :) Many thanks to 
Den for valuable help during debugging.

Herbert pointed out, that xfrm_lookup() will put the rtable in case
of error itself, so the first goto fix is redundant.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Given that there are no apparent calls to lock_kernel() or
unlock_kernel() under net/ax25, delete the TODO reference related to
that.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SIOCADDMULTI/SIOCDELMULTI check whether the driver has a set_multicast_list
method to determine whether it supports multicast. Drivers implementing
secondary unicast support use set_rx_mode however.

Check for both dev->set_multicast_mode and dev->set_rx_mode to determine
multicast capabilities.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It should be a "struct ktermios" not a "struct termios".

Based upon a build warning reported by Stephen Rothwell.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IFF_ALLMULTI is an indication from the network stack to the driver
to disable multicast filters, drivers should never set it directly.

Since the UML networking device doesn't have any filtering capabilites,
it doesn't the set_multicast_list function at all, it is kept so userspace
can still issue SIOCADDMULTI/SIOCDELMULTI ioctls however.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing these flags requires to use dev_set_allmulti/dev_set_promiscuity
or dev_change_flags. Setting it directly causes two unwanted effects:

- the next dev_change_flags call will notice a difference between
  dev->gflags and the actual flags, enable promisc/allmulti
  mode and incorrectly update dev->gflags

- this keeps the underlying device in promisc/allmulti mode until
  the VLAN device is deleted
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

- Handling TX completions on the same cpu as the sender.
Signed-off-by: NSurjit Reang <surjit.reang@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Some ROMs on embedded devices store incorrect values for
the PHY address of the ethernet device.
It looks like the number is sign-extended.
Truncate the value by applying the PHY-address mask to it.
The patch was tested on a bcm47xx embedded system (where the bug
triggers) and a bcm4400 PCI card.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

According to: Documentation/networking/netdevices.txt:

<cite>
napi->poll:
..........
	Context: softirq
	         will be called with interrupts disabled by netconsole.
</cite>

napi->poll() could be called either with interrupts enabled
(in softirq context) or disabled (by netconsole), so the irq flag
should be preserved.

Inspired by Ingo's resent forcedeth patch :-)
Signed-off-by: NMarin Mitov <mitov@issp.bas.bg>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When query for OID_GEN_PHYSICAL_MEDIUM fails, uninitialized pointer
'phym' is being accessed in generic_rndis_bind(), resulting OOPS.
Patch fixes phym to be initialized and setup correctly when
rndis_query() for physical medium fails.

Bug was introduced by following commit:
commit 039ee17d
Author: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date:   Sun Jan 27 23:34:33 2008 +0200
Reported-by: NDmitri Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Using iWARP with a Chelsio T3 NIC generates the following lockdep warning:

    =================================
    [ INFO: inconsistent lock state ]
    2.6.25-rc6 #50
    ---------------------------------
    inconsistent {softirq-on-W} -> {in-softirq-W} usage.
    swapper/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
     (&adap->sge.reg_lock){-+..}, at: [<ffffffff880e5ee2>] cxgb_offload_ctl+0x3af/0x507 [cxgb3]

The problem is that reg_lock is used with plain spin_lock() in
drivers/net/cxgb3/sge.c but is used with spin_lock_irqsave() in
drivers/net/cxgb3/cxgb3_offload.c.  This is technically a false
positive, since the uses in sge.c are only in the initialization and
cleanup paths and cannot overlap with any use in interrupt context.

The best fix is probably just to use spin_lock_irq() with reg_lock in
sge.c.  Even though it's not strictly required for correctness, it
avoids triggering lockdep and the extra overhead of disabling
interrupts is not important at all in the initialization and cleanup
slow paths.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Indicate that HEA calculates IPv4 checksums only
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The Hirose USB-100 adapter uses a dm9601 chip.
Reported by Robert Brockway.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Marvell PHY m88e1111 (not sure about other models, but think they too)
works in two modes: fiber and copper. In Marvell PHY driver (that we
have in current community kernels) code supported only copper mode,
and this is not configurable, bits for copper mode are simply written
in registers during PHY initialization.

This patch adds support for both modes.
Signed-off-by: NAlexandr Smirnov <asmirnov@ru.mvista.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Don't count rx dropped packets based on return value of netif_receive_skb(),
which is misleading.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

o eliminate tx lock in netxen adapter struct, instead pound on netdev
  tx lock appropriately.
o remove old "concurrent transmit" code that unnecessarily drops and
  reacquires tx lock in hard_xmit_frame(), this is already serialized
  the netdev xmit lock.
o reduce scope of tx lock in tx cleanup. tx cleanup operates on
  different section of the ring than transmitting cpus and is
  guarded by producer and consumer indices. This fixes a race
  caused by rx softirq preemption on realtime kernels.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

o separate and simpler irq handler for msi interrupts, avoids few checks
  than legacy mode.
o avoid redudant tx_has_work() and rx_has_work() checks in interrupt
  and napi, which can uncork irq based on racy (lockless) access to tx
  and rx ring indices. If we get interrupt, there's sufficient reason to
  schedule napi.
o replenish rx ring more often, remove self-imposed threshold rcv_free
  that prevents posting rx desc to card. This improves performance in
  low memory.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Recent netxen firmware has new scheme of generating MSI interrupts, it
raises interrupt and blocks itself, waiting for driver to unmask. This
reduces chance of spurious interrupts.

The driver will be able to deal with older firmware as well.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Tested-by: NVernon Mauery <mauery@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The variable num_group_tail_writes is initialized but never used otherwise.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
identifier i;
constant C;
@@

(
extern T i;
|
- T i;
  <+... when != i
- i = C;
  ...+>
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

le16_to_cpu() should be done before mask and shift...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Update version to 3.2.5.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

For bonding interfaces any attempt to read the sysfs directory contents after
module removal results in an oops.  The fix is to release sysfs attributes
for the interfaces upon module unload.
Signed-off-by: NLibor Pechacek <lpechacek@suse.cz>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>