- 21 5月, 2014 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "Still fixing regressions (partly by reverting commits that broke things for people), fixing other stable-candidate bugs and adding some blacklist entries for ACPI video and _OSI. Two ACPICA regression fixes (one recent and one for a 3.14 commit), a fix for an ACPI-related regression in TPM (introduced in 3.14), a revert of the ACPI AC driver conversion in 3.13 that went wrong for an unknown reason, two reverts of commits that attempted to remove an old user space interface in /proc and broke some utilities, in 3.13 too, a fix for a CPU hotplug bug in the ACPI processor driver (stable material), two (stable candidate) fixes for intel_pstate and a few new blacklist entries, mostly for systems that shipped with Windows 8. Specifics: - ACPICA fix for a stale pointer access introduced by a recent commit in the XSDT validation code from Lv Zheng. - ACPICA fix for the default value of the command line switch to favor 32-bit FADT addresses (in case there's a conflict between a 64-bit and a 32-bit address). The previous default was that the 32-bit version would take precedence and we tried to change it to the other way around and it didn't work. From Lv Zheng. - A TPM commit related to ACPI _DSM in 3.14 caused the driver to refuse to load if a specific _DSM was missing and that broke resume from system suspend on Chromebooks that require the TPM hardware to be restored to a working state during resume by the OS. Restore the old behavior to load the driver if the _DSM in question is not present, but prevent it from using the feature the _DSM is for. - ACPI AC driver conversion in 3.13 broke thermal management on at least one machine and has to be reverted. From Guenter Roeck. - Two reverts of 3.13 commits that attempted to remove the old ACPI battery interface in /proc, but turned out to break some utilities still using that interface. From Lan Tianyu. - ACPI processor driver fix to prevent acpi_processor_add() from modifying the CPU device's .offline field which leads to breakage if the initial online of the CPU fails. From Igor Mammedov. - Two intel_pstate fixes, one to take a BayTrail documentation update into account and one to avoid forcing the maximum P-state on init which causes CPU PM trouble on systems with P-states coordination when one of the CPU cores is initialized after an offline/online cycle triggered by user space. Both stable candidates, from Dirk Brandewie. - Fix for the ACPI video DMI blacklist entry for Dell Inspiron 7520 from Aaron Lu. - Two new ACPI video blacklist entries for machines shipping with Win8 that need to use native backlight so that it can be controlled in a usual way (which doesn't work otherwise due bugs in the ACPI tables) from Hans de Goede. - Two ACPI _OSI quirks for systems that need them to work correctly with Linux from Edward Lin and Hans de Goede" * tag 'pm+acpi-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Revert native brightness quirk for ThinkPad T530 intel_pstate: remove setting P state to MAX on init ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses. ACPI / video: correct DMI tag for Dell Inspiron 7520 intel_pstate: Set turbo VID for BayTrail ACPI / TPM: Fix resume regression on Chromebooks ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig ACPI / processor: do not mark present at boot but not onlined CPU as onlined ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus" ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX ACPI: blacklist win8 OSI for Dell Inspiron 7737 ACPI / video: Add use_native_backlight quirks for more systems ACPI: Revert "ACPI / Battery: Remove battery's proc directory" ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c" ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "A dm-crypt fix for a cpu hotplug crash that switches from using per-cpu data to a mempool allocation (which offers allocation with cpu locality, and there is no inter-cpu communication on slab allocation). A couple dm-thinp stable fixes to address "out-of-data-space" issues. A dm-multipath fix for a LOCKDEP warning introduced in 3.15-rc1" * tag 'dm-3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: fix lock order inconsistency in multipath_ioctl dm thin: add timeout to stop out-of-data-space mode holding IO forever dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode dm crypt: fix cpu hotplug crash by removing per-cpu structure
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull device tree fixes from Grant Likely: "Drivercore bugfixes for v3.15 This branch contains bug fixes important to get into v3.15. There is a fix for modifying properties seen during early boot, a fix for an incorrect prototype when CONFIG_OF=n, and a couple of corrections to device tree memory nodes on a few platforms" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: mips: dts: Fix missing device_type="memory" property in memory nodes arm: dts: Fix missing device_type="memory" for ste-ccu8540 of: fix CONFIG_OF=n prototype of of_node_full_name() of: make of_update_property() usable earlier in the boot process
-
- 20 5月, 2014 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Unfortunately this update became bigger than previous pull requests, which is almost a pattern in rc5-6. But, the only obvious big changes are for the new Intel DSP ASoC drivers, so the impact must be fairly limited. Other than that, usual small fixes in various fields: HD-audio, ASoC core and ASoC fsl and codec drivers" * tag 'sound-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: sb_mixer: missing return statement ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile ASoC: Intel: Fix Baytrail SST DSP firmware loading ALSA: hda - mask buggy stream DMA0 for Broadwell display controller ALSA: hda - Add new GPU codec ID to snd-hda ASoC: fsl_esai: Set PCRC and PRRC registers at the end of hw_params() ASoC: fsl_esai: Only bypass sck_div for EXTAL source ASoC: fsl_esai: Fix incorrect condition within ratio range check for FP ASoC: dapm: Fix SUSPEND -> OFF bias sequence ASoC: dapm: Skip CODEC<->CODEC links in connect_dai_link_widgets() ASoC: pcm: Fix incorrect condition check for case SNDRV_PCM_TRIGGER_SUSPEND ALSA: hda - add headset mic detect quirks for three Dell laptops ASoC: Update Cirrus Logic CODEC maintainers. ASoC: Intel: Fix block offset calculations. ASoC: Intel: Fix check for pdata usage before dereference. ASoC: Intel: Fix stream position pointer. ASoC: Intel: Fix allow hw_params to be called more than once. ASoC: Intel: Fix Audio DSP usage when IOMMU is enabled. ASoC: Intel: Fix Haswell/Broadwell DSP page table creation. ASoC: Intel: Fix allocated block list usage when adding blocks. ...
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for various loose ends: - Fix workarounds for R4000 erratum. - Patch up DEC, Siemens-Nixdorf and Loongson hardware support. - Wire up renameat2 syscall. - Delete unused file - it was causing false warnings from maintenance scripts. - Revert a patch because it's functionality is now implemented twice which causes superfluous /proc/cpuinfo output. - Fix a microMIPS regression" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mm: Fix broken microMIPS kernel regression. MIPS: Add new AUDIT_ARCH token for the N32 ABI on MIPS64 MIPS: Wire up renameat2 syscall. MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD. MIPS: Remove file missed when removing rm9k support a while ago. MIPS/loongson2_cpufreq: Fix CPU clock rate setting MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ MIPS: csum_partial.S CPU_DADDI_WORKAROUNDS bug fix MIPS: __strncpy_from_user_asm CPU_DADDI_WORKAROUNDS bug fix MIPS: __delay CPU_DADDI_WORKAROUNDS bug fix MIPS: DEC/SNI: O32 wrapper stack switching fixes MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes MAINTAINERS: TURBOchannel: Update entry Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "There are two patches in here: The first patch greatly improves latency and corrects the memory ordering in our light-weight atomic locking syscall. The second patch ratelimits printing of userspace segfaults in the same way as it's done on other platforms. This fixes a possible DOS on parisc since it prevents the syslog to grow too fast. For example, when the debian acl2 package was built on our debian buildd servers, this package produced lots of gigabytes in syslog in very short time and thus filled our harddisks, which then turned the server nearly completely unaccessible and unresponsive" * 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Improve LWS-CAS performance parisc: ratelimit userspace segfault printing
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull two arm64 fixes from Catalin Marinas: - arm64 migrate_irqs() fix following commit ffde1de6 (irqchip: Gic: Support forced affinity setting) - fix arm64 pud_huge() to return 0 when only 2 levels page tables are used (__PAGETABLE_PMD_FOLDED defined and pmd_huge already covers block entries at the first level), otherwise KVM gets confused * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix pud_huge() for 2-level pagetables arm64: use cpu_online_mask when using forced irq_set_affinity
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag由 Linus Torvalds 提交于
Pull Metag architecture and related fixes from James Hogan: "Mostly fixes for metag and parisc relating to upgrowing stacks. - Fix missing compiler barriers in metag memory barriers. - Fix BUG_ON on metag when RLIMIT_STACK hard limit is increased beyond safe value. - Make maximum stack size configurable. This reduces the default user stack size back to 80MB (especially on parisc after their removal of _STK_LIM_MAX override). This only affects metag and parisc. - Remove metag _STK_LIM_MAX override to match other arches and follow parisc, now that it is safe to do so (due to the BUG_ON fix mentioned above). - Finally now that both metag and parisc _STK_LIM_MAX overrides have been removed, it makes sense to remove _STK_LIM_MAX altogether" * tag 'metag-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: asm-generic: remove _STK_LIM_MAX metag: Remove _STK_LIM_MAX override parisc,metag: Do not hardcode maximum userspace stack size metag: Reduce maximum stack size to 256MB metag: fix memory barriers
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm/intel fixes from Dave Airlie: "Just some intel fixes. I have some radeon ones but I need to get some patches dropped from the pull req" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Increase WM memory latency values on SNB drm/i915: restore backlight precision when converting from ACPI drm/i915: Use the first mode if there is no preferred mode in the EDID drm/i915/dp: force eDP lane count to max available lanes on BDW drm/i915/vlv: reset VLV media force wake request register drm/i915/SDVO: For sysfs link put directory and target in correct order drm/i915: use lane count and link rate from VBT as minimums for eDP drm/i915: clean up VBT eDP link param decoding drm/i915: consider the source max DP lane count too
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Make support for 16-bit segments a runtime option x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow() x86, rdrand: When nordrand is specified, disable RDSEED as well
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner: "A single bug fix for a long standing issue: - Updating the expiry value of a relative timer _after_ letting the idle logic select a target cpu for the timer based on its stale expiry value is outright stupid. Thanks to Viresh for spotting the brainfart" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Set expiry time before switch_hrtimer_base()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "Two small updates from the irq departement: - Provide missing inline stub for a SMP only function - Add sub-maintainer for the drivers/irqchip/ part of the irq subsystem. YAY!" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainer for drivers/irqchip genirq: Provide irq_force_affinity fallback for non-SMP
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Intel fixes for regressions, black screens and hangs, for 3.15. * tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel: drm/i915: Increase WM memory latency values on SNB drm/i915: restore backlight precision when converting from ACPI drm/i915: Use the first mode if there is no preferred mode in the EDID drm/i915/dp: force eDP lane count to max available lanes on BDW drm/i915/vlv: reset VLV media force wake request register drm/i915/SDVO: For sysfs link put directory and target in correct order drm/i915: use lane count and link rate from VBT as minimums for eDP drm/i915: clean up VBT eDP link param decoding drm/i915: consider the source max DP lane count too
-
- 17 5月, 2014 3 次提交
-
-
由 Rafael J. Wysocki 提交于
* acpi-video: ACPI / video: Revert native brightness quirk for ThinkPad T530
-
由 Hans de Goede 提交于
Seems it helps some users, but causes issues for other users: https://bugzilla.redhat.com/show_bug.cgi?id=1089545 So lets drop it for now until we've figured out a better fix. Fixes: 43d94902 (ACPI / video: Add use_native_backlight quirks for more systems) References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Mark Salter 提交于
The following happens when trying to run a kvm guest on a kernel configured for 64k pages. This doesn't happen with 4k pages: BUG: failure at include/linux/mm.h:297/put_page_testzero()! Kernel panic - not syncing: BUG! CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF 3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1 Call trace: [<fffffe0000096034>] dump_backtrace+0x0/0x16c [<fffffe00000961b4>] show_stack+0x14/0x1c [<fffffe000066e648>] dump_stack+0x84/0xb0 [<fffffe0000668678>] panic+0xf4/0x220 [<fffffe000018ec78>] free_reserved_area+0x0/0x110 [<fffffe000018edd8>] free_pages+0x50/0x88 [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40 [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44 [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184 [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c [<fffffe00001edc1c>] __fput+0xb0/0x288 [<fffffe00001ede4c>] ____fput+0xc/0x14 [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c [<fffffe0000095c14>] do_notify_resume+0x54/0x58 In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page() on the stage2 pgd which leads to the BUG in put_page_testzero(). This happens because a pud_huge() test in unmap_range() returns true when it should always be false with 2-level pages tables used by 64k pages. This patch removes support for huge puds if 2-level pagetables are being used. Signed-off-by: NMark Salter <msalter@redhat.com> [catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> # v3.11+
-
- 16 5月, 2014 4 次提交
-
-
由 Leif Lindholm 提交于
A few platforms lack a 'device_type = "memory"' for their memory nodes, relying on an old ppc quirk in order to discover its memory. Add the missing data so that all parsing code can find memory nodes correctly. Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Acked-by: NJohn Crispin <blogic@openwrt.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Leif Lindholm 提交于
The current .dts for ste-ccu8540 lacks a 'device_type = "memory"' for its memory node, relying on an old ppc quirk in order to discover its memory. Fix the data so that all parsing code can handle it correctly. Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 John David Anglin 提交于
The attached change significantly improves the performance of the LWS-CAS code in syscall.S. This allows a number of packages to build (e.g., zeromq3, gtest and libxs) that previously failed because slow LWS-CAS performance under contention. In particular, interrupts taken while the lock was taken degraded performance significantly. The change does the following: 1) Disables interrupts around the CAS operation, and 2) Changes the loads and stores to use the ordered completer, "o", on PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is accepted on both PA 1.X and 2.0. The use of ordered loads and stores probably makes no difference on all existing hardware, but it seemed pedantically correct. In particular, the CAS operation must complete before LDCW lock is released. As written before, a processor could reorder the operations. I don't believe the period interrupts are disabled is long enough to significantly increase interrupt latency. For example, the TLB insert code is longer. Worst case is a memory fault in the CAS operation. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Ratelimit printing of userspace segfaults and make it runtime configurable via the /proc/sys/debug/exception-trace variable. This should resolve syslog from growing way too fast and thus prevents possible system service attacks. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
-
- 15 5月, 2014 20 次提交
-
-
由 Stephen Rothwell 提交于
Make the CONFIG_OF=n prototpe of of_node_full_name() mateh the CONFIG_OF=y version. Fixes compile warnings like this: sound/soc/soc-core.c: In function 'soc_check_aux_dev': sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] codecname = of_node_full_name(aux_dev->codec_of_node); when CONFIG_OF is not defined. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: intel_pstate: remove setting P state to MAX on init intel_pstate: Set turbo VID for BayTrail
-
由 Rafael J. Wysocki 提交于
* acpi-video: ACPI / video: correct DMI tag for Dell Inspiron 7520 ACPI / video: Add use_native_backlight quirks for more systems * acpi-blacklist: ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX ACPI: blacklist win8 OSI for Dell Inspiron 7737
-
由 Rafael J. Wysocki 提交于
* acpi-ac: ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus" * acpi-proc: ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig ACPI: Revert "ACPI / Battery: Remove battery's proc directory" ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
-
由 Rafael J. Wysocki 提交于
* acpica: ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses. ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table(). * acpi-tpm: ACPI / TPM: Fix resume regression on Chromebooks * acpi-processor: ACPI / processor: do not mark present at boot but not onlined CPU as onlined
-
由 Ville Syrjälä 提交于
On SNB the BIOS provided WM memory latency values seem insufficient to handle high resolution displays. In this particular case the display mode was a 2560x1440@60Hz, which makes the pixel clock 241.5 MHz. It was empirically found that a memory latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec is what the typical BIOS provided values are on IVB systems. Increase the WM memory latency values to at least 1.2 usec on SNB. Hopefully this won't have a significant effect on power consumption. v2: Increase the latency values regardless of the pixel clock Cc: Robert N <crshman@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254Tested-by: NRobert Navarro <crshman@gmail.com> Tested-by: NVitaly Minko <vitaly.minko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Aaron Lu 提交于
When we set backlight on behalf of ACPI opregion, we will convert the backlight value in the 0-255 range defined in opregion to the actual hardware level. Commit 22505b82 (drm/i915: avoid brightness overflow when doing scale) is meant to fix the overflow problem when doing the conversion, but it also caused a problem that the converted hardware level doesn't quite represent the intended value: say user wants maximum backlight level(255 in opregion's range), then we will calculate the actual hardware level to be: level = freq / max * level, where freq is the hardware's max backlight level(937 on an user's box), and max and level are all 255. The converted value should be 937 but the above calculation will yield 765. To fix this issue, just use 64 bits to do the calculation to keep the precision and avoid overflow at the same time. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491Reported-by: NNico Schottelius <nico-bugzilla.kernel.org@schottelius.org> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
This matches the algorithm used by earlier kernels when selecting the mode for the fbcon. And only if there is no modes at all, do we fall back to using the BIOS configuration. Seamless transition is still preserved (from the BIOS configuration to ours) so long as the BIOS has also chosen what we hope is the native configuration. Reported-by: NKnut Petersen <Knut_Petersen@t-online.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Tested-by: NKnut Petersen <Knut_Petersen@t-online.de> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> [Jani: applied Chris' "Please imagine that I wrote this correctly."] Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Jani Nikula 提交于
There are certain BDW high res eDP machines that regressed due to commit 38aecea0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Mar 3 11:18:10 2014 +0100 drm/i915: reverse dp link param selection, prefer fast over wide again The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at 2.7 Gbps on the affected machines. Link training succeeded for both, but the screen remained blank with the former config. Further investigation showed that 4 lanes at 5.4 Gbps worked also. The root cause for the blank screen using 2 lanes remains unknown, but apparently the driver for a certain other operating system by default uses the max available lanes. Follow suit on Broadwell eDP, for at least until we figure out what is going on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com> Tested-by: NRodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Linus Torvalds 提交于
Checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels disabled 16-bit segments on 64-bit kernels due to an information leak. However, it does seem that people are genuinely using Wine to run old 16-bit Windows programs on Linux. A proper fix for this ("espfix64") is coming in the upcoming merge window, but as a temporary fix, create a sysctl to allow the administrator to re-enable support for 16-bit segments. It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If you hit this issue and care about your old Windows program more than you care about a kernel stack address information leak, you can do echo 1 > /proc/sys/abi/ldt16 as root (add it to your startup scripts), and you should be ok. The sysctl table is only added if you have COMPAT support enabled on x86-64, but I assume anybody who runs old windows binaries very much does that ;) Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com Cc: <stable@vger.kernel.org>
-
由 James Hogan 提交于
_STK_LIM_MAX could be used to override the RLIMIT_STACK hard limit from an arch's include/uapi/asm-generic/resource.h file, but is no longer used since both parisc and metag removed the override. Therefore remove it entirely, setting the hard RLIMIT_STACK limit to RLIM_INFINITY directly in include/asm-generic/resource.h. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: John David Anglin <dave.anglin@bell.net>
-
由 James Hogan 提交于
Meta overrode _STK_LIM_MAX (the default RLIMIT_STACK hard limit) to 256MB, apparently in an attempt to prevent setup_arg_pages's STACK_GROWSUP code from choosing the maximum stack size of 1GB, which is far too large for Meta's limited virtual address space and hits a BUG_ON (stack_top is usually 0x3ffff000). However the commit "metag: Reduce maximum stack size to 256MB" reduces the absolute stack size limit to a safe value for metag. This allows the default _STK_LIM_MAX override to be removed, bringing the default behaviour in line with all other architectures. Parisc in particular recently removed their override of _STK_LIMT_MAX in commit e0d8898d (parisc: remove _STK_LIM_MAX override) since it subtly affects stack allocation semantics in userland. Meta's uapi/asm/resource.h can now be removed and switch to using generic-y. Suggested-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
-
由 Helge Deller 提交于
This patch affects only architectures where the stack grows upwards (currently parisc and metag only). On those do not hardcode the maximum initial stack size to 1GB for 32-bit processes, but make it configurable via a config option. The main problem with the hardcoded stack size is, that we have two memory regions which grow upwards: stack and heap. To keep most of the memory available for heap in a flexmap memory layout, it makes no sense to hard allocate up to 1GB of the memory for stack which can't be used as heap then. This patch makes the stack size for 32-bit processes configurable and uses 80MB as default value which has been in use during the last few years on parisc and which hasn't showed any problems yet. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
-
由 James Hogan 提交于
Specify the maximum stack size for arches where the stack grows upward (parisc and metag) in asm/processor.h rather than hard coding in fs/exec.c so that metag can specify a smaller value of 256MB rather than 1GB. This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased beyond a safe value by root. E.g. when starting a process after running "ulimit -H -s unlimited" it will then attempt to use a stack size of the maximum 1GB which is far too big for metag's limited user virtual address space (stack_top is usually 0x3ffff000): BUG: failure at fs/exec.c:589/shift_arg_pages()! Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # only needed for >= v3.9 (arch/metag)
-
由 Mikulas Patocka 提交于
Volatile access doesn't really imply the compiler barrier. Volatile access is only ordered with respect to other volatile accesses, it isn't ordered with respect to general memory accesses. Gcc may reorder memory accesses around volatile access, as we can see in this simple example (if we compile it with optimization, both increments of *b will be collapsed to just one): void fn(volatile int *a, long *b) { (*b)++; *a = 10; (*b)++; } Consequently, we need the compiler barrier after a write to the volatile variable, to make sure that the compiler doesn't reorder the volatile write with something else. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 Mike Snitzer 提交于
Commit 3e9f1be1 ("dm mpath: remove process_queued_ios()") did not consistently take the multipath device's spinlock (m->lock) before calling dm_table_run_md_queue_async() -- which takes the q->queue_lock. Found with code inspection using hint from reported lockdep warning. Reported-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Joe Thornber 提交于
If the pool runs out of data space, dm-thin can be configured to either error IOs that would trigger provisioning, or hold those IOs until the pool is resized. Unfortunately, holding IOs until the pool is resized can result in a cascade of tasks hitting the hung_task_timeout, which may render the system unavailable. Add a fixed timeout so IOs can only be held for a maximum of 60 seconds. If LVM is going to resize a thin-pool that is out of data space it needs to be prompt about it. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.14+
-
由 Joe Thornber 提交于
Commit 3e1a0699 ("dm thin: fix out of data space handling") introduced a regression in the metadata commit() method by returning an error if the pool is in PM_OUT_OF_DATA_SPACE mode. This oversight caused a thin device to return errors even if the default queue_if_no_space ENOSPC handling mode is used. Fix commit() to only fail if pool is in PM_READ_ONLY or PM_FAIL mode. Reported-by: qindehua@163.com Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.14+
-
由 Mikulas Patocka 提交于
The DM crypt target used per-cpu structures to hold pointers to a ablkcipher_request structure. The code assumed that the work item keeps executing on a single CPU, so it didn't use synchronization when accessing this structure. If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online, the work item could be moved to another CPU. This causes dm-crypt crashes, like the following, because the code starts using an incorrect ablkcipher_request: smpboot: CPU 7 is now offline BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [<ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt] ... Call Trace: [<ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt] [<ffffffff81062060>] ? finish_task_switch+0x40/0xc0 [<ffffffff81052a28>] ? process_one_work+0x168/0x470 [<ffffffff8105366b>] ? worker_thread+0x10b/0x390 [<ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290 [<ffffffff81058d9f>] ? kthread+0xaf/0xc0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 Fix this bug by removing the per-cpu definition. The structure ablkcipher_request is accessed via a pointer from convert_context. Consequently, if the work item is rescheduled to a different CPU, the thread still uses the same ablkcipher_request. This change may undermine performance improvements intended by commit c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In practice no performance difference was observed on recent hardware. But regardless, correctness is more important than performance. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Steven J. Hill 提交于
Commit f4ae17aa [MIPS: mm: Use scratch for PGD when !CONFIG_MIPS_PGD_C0_CONTEXT] broke microMIPS kernel builds. This patch refactors that code similar to what was done for the 'clear_page' and 'copy_page' functions. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6744/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-