- 26 9月, 2006 4 次提交
-
-
由 Andi Kleen 提交于
It's needed for external debuggers and overhead is very small. Also make the actual notifier chain they use static Cc: jbeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Rusty Russell 提交于
This patch replaces the open-coded early commandline parsing throughout the i386 boot code with the generic mechanism (already used by ppc, powerpc, ia64 and s390). The code was inconsistent with whether it deletes the option from the cmdline or not, meaning some of these will get passed through the environment into init. This transformation is mainly mechanical, but there are some notable parts: 1) Grammar: s/linux never set's it up/linux never sets it up/ 2) Remove hacked-in earlyprintk= option scanning. When someone actually implements CONFIG_EARLY_PRINTK, then they can use early_param(). [AK: actually it is implemented, but I'm adding the early_param it in the next x86-64 patch] 3) Move declaration of generic_apic_probe() from setup.c into asm/apic.h 4) Various parameters now moved into their appropriate files (thanks Andi). 5) All parse functions which examine arg need to check for NULL, except one where it has subtle humor value. AK: readded acpi_sci handling which was completely dropped AK: moved some more variables into acpi/boot.c Cc: len.brown@intel.com Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Move initialization of all memory end variables to as early as possible, so that dependent code doesn't need to check whether these variables have already been set. Change the range check in kunmap_atomic to actually make use of this so that the no-mapping-estabished path (under CONFIG_DEBUG_HIGHMEM) gets used only when the address is inside the lowmem area (and BUG() otherwise). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 keith mannthey 提交于
With CONFIG_PHYSICAL_START set to a non default values the i386 boot_ioremap code calculated its pte index wrong and users of boot_ioremap have their areas incorrectly mapped (for me SRAT table not mapped during early boot). This patch removes the addr < BOOT_PTE_PTRS constraint. [ Keith says this is applicable to 2.6.16 and 2.6.17 as well ] Signed-off-by: Keith Mannthey<kmannth@us.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: <stable@kernel.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 7月, 2006 1 次提交
-
-
由 Heiko Carstens 提交于
Add __start_rodata and __end_rodata to sections.h to avoid extern declarations. Needed by s390 code (see following patch). [akpm@osdl.org: update architectures] Cc: Arjan van de Ven <arjan@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 8 次提交
-
-
由 Christoph Lameter 提交于
Conversion of nr_writeback to per zone counter. This removes the last page_state counter from arch/i386/mm/pgtable.c so we drop the page_state from there. [akpm@osdl.org: bugfix] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
This makes nr_dirty a per zone counter. Looping over all processors is avoided during writeback state determination. The counter aggregation for nr_dirty had to be undone in the NFS layer since we summed up the page counts from multiple zones. Someone more familiar with NFS should probably review what I have done. [akpm@osdl.org: bugfix] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Conversion of nr_page_table_pages to a per zone counter [akpm@osdl.org: bugfix] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
- Allows reclaim to access counter without looping over processor counts. - Allows accurate statistics on how many pages are used in a zone by the slab. This may become useful to balance slab allocations over various zones. [akpm@osdl.org: bugfix] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
nr_mapped is important because it allows a determination of how many pages of a zone are not mapped, which would allow a more efficient means of determining when we need to reclaim memory in a zone. We take the nr_mapped field out of the page state structure and define a new per zone counter named NR_FILE_MAPPED (the anonymous pages will be split off from NR_MAPPED in the next patch). We replace the use of nr_mapped in various kernel locations. This avoids the looping over all processors in try_to_free_pages(), writeback, reclaim (swap + zone reclaim). [akpm@osdl.org: bugfix] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 28 6月, 2006 3 次提交
-
-
由 Ingo Molnar 提交于
Add debug_check_no_locks_freed(), as a central inline to add bad-lock-free-debugging functionality to. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Localize poison values into one header file for better documentation and easier/quicker debugging and so that the same values won't be used for multiple purposes. Use these constants in core arch., mm, driver, and fs code. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NMatt Mackall <mpm@selenic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yasunori Goto 提交于
Change the name of old add_memory() to arch_add_memory. And use node id to get pgdat for the node at NODE_DATA(). Note: Powerpc's old add_memory() is defined as __devinit. However, add_memory() is usually called only after bootup. I suppose it may be redundant. But, I'm not well known about powerpc. So, I keep it. (But, __meminit is better at least.) Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Anil S Keshavamurthy 提交于
Overloading of page fault notification with the notify_die() has performance issues(since the only interested components for page fault is kprobes and/or kdb) and hence this patch introduces the new notifier call chain exclusively for page fault notifications their by avoiding notifying unnecessary components in the do_page_fault() code path. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2006 4 次提交
-
-
由 Oleg Nesterov 提交于
list_splice_init(list, head) does unneeded job if it is known that list_empty(head) == 1. We can use list_replace_init() instead. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
flush_tlb_all uses on_each_cpu, which will disable/enable interrupt. In suspend/resume time, this will make interrupt wrongly enabled. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
We need to check for vm86 mode first before looking at selector privilege bits. Segment limit is always base + 64k and only the low 16 bits of EIP are significant in vm86 mode. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Cc: Andi Kleen <ak@muc.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Rohit Seth <rohitseth@google.com> Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
The i386 page fault handler does not allow enough slack when checking for userspace access below the current stack pointer. This prevents use of the enter instruction by user code. Fix this by allowing enough slack for "enter $65535,$31" to execute. Problem reported by Tomasz Malesinski <tmal@mimuw.edu.pl> Tested using this program, based on the original from Tomasz: .file "ovflow.S" .version "01.01" gcc2_compiled.: .section .rodata .LC0: .string "asdf\n" .text .align 4 .globl main .type main,@function main: nest_level=0 .rept 30 enter $0,$nest_level nest_level=nest_level+1 .endr enter $65535,$30 enter $65535,$31 addl $-12,%esp pushl $.LC0 call printf addl $16,%esp .L2: .rept 32 leave .endr ret .Lfe1: .size main,.Lfe1-main .ident "GCC: (GNU) 2.95.4 20011002 (Debian prerelease)" Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 5月, 2006 1 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
typo in #ifdefs. Fixes http://bugme.osdl.org/show_bug.cgi?id=6538Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 4月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating mem_maps. This only needs some untangling of ifdefs to enable the necessary code even without SPARSEMEM. Originally from Keith Mannthey, hacked by AK. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 3 次提交
-
-
由 Dave Hansen 提交于
Just about every architecture defines some macros to do operations on pfns. They're all virtually identical. This patch consolidates all of them. One minor glitch is that at least i386 uses them in a very skeletal header file. To keep away from #include dependency hell, I stuck the new definitions in a new, isolated header. Of all of the implementations, sh64 is the only one that varied by a bit. It used some masks to ensure that any sign-extension got ripped away before the arithmetic is done. This has been posted to that sh64 maintainers and the development list. Compiles on x86, x86_64, ia64 and ppc64. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
Because pgdat_list was linked to pgdat_list in *reverse* order, (By default) some of arch has to sort it by themselves. for_each_pgdat has gone..for_each_online_pgdat() uses node_online_map, which doesn't need to be sorted. This patch removes codes for sorting pgdat. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
Replace for_each_pgdat() with for_each_online_pgdat(). Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 3月, 2006 4 次提交
-
-
由 Andrew Morton 提交于
Attempt to fix the problem wherein people's oops reports scroll off the screen due to repeated oopsing or to oopses on other CPUs. If this happens the user can reboot with the `pause_on_oops=<seconds>' option. It will allow the first oopsing CPU to print an oops record just a single time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs to enter a tight loop until the specified number of seconds have elapsed. The patch implements the infrastructure generically in the expectation that architectures other than x86 will find it useful. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Consolidate all kernel bug printouts to begin with the "BUG: " string. Makes it easier to find them in large bootup logs. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Registering a callback handler through register_die_notifier() is obviously primarily intended for use by modules. However, the way these currently get called it is basically impossible for them to actually be used by modules, as there is, on non-PAE configurationes, a good chance (the larger the module, the better) for the system to crash as a result. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Besides the modular aspect, similar problems would even arise for in- kernel consumers of the API if they touched ioremap()ed or vmalloc()ed memory inside their handlers. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerd Hoffmann 提交于
Implement SMP alternatives, i.e. switching at runtime between different code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP. The UP->SMP case is useful for CPU hotplug. With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and when the number of CPUs goes down to 1, and switches to SMP when the number of CPUs goes up to 2. Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is patched once at boot time (if needed) and the tables are released afterwards. The changes in detail: * The current alternatives bits are moved to a separate file, the SMP alternatives code is added there. * The patch adds some new elf sections to the kernel: .smp_altinstructions like .altinstructions, also contains a list of alt_instr structs. .smp_altinstr_replacement like .altinstr_replacement, but also has some space to save original instruction before replaving it. .smp_locks list of pointers to lock prefixes which can be nop'ed out on UP. The first two are used to replace more complex instruction sequences such as spinlocks and semaphores. It would be possible to deal with the lock prefixes with that as well, but by handling them as special case the table sizes become much smaller. * The sections are page-aligned and padded up to page size, so they can be free if they are not needed. * Splitted the code to release init pages to a separate function and use it to release the elf sections if they are unused. Signed-off-by: NGerd Hoffmann <kraxel@suse.de> Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 3 次提交
-
-
由 David Gibson 提交于
Quite a long time back, prepare_hugepage_range() replaced is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to verify if an address range is suitable for a hugepage mapping. is_aligned_hugepage_range() stuck around, but only to implement prepare_hugepage_range() on archs which didn't implement their own. Most archs (everything except ia64 and powerpc) used the same implementation of is_aligned_hugepage_range(). On powerpc, which implements its own prepare_hugepage_range(), the custom version was never used. In addition, "is_aligned_hugepage_range()" was a bad name, because it suggests it returns true iff the given range is a good hugepage range, whereas in fact it returns 0-or-error (so the sense is reversed). This patch cleans up by abolishing is_aligned_hugepage_range(). Instead prepare_hugepage_range() is defined directly. Most archs use the default version, which simply checks the given region is aligned to the size of a hugepage. ia64 and powerpc define custom versions. The ia64 one simply checks that the range is in the correct address space region in addition to being suitably aligned. The powerpc version (just as previously) checks for suitable addresses, and if necessary performs low-level MMU frobbing to set up new areas for use by hugepages. No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Stop using __put_page and page_count in i386 pageattr.c Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 1 次提交
-
-
由 Matt Tolentino 提交于
Add __meminit to the __init lineup to ensure functions default to __init when memory hotplug is not enabled. Replace __devinit with __meminit on functions that were changed when the memory hotplug code was introduced. Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 David Woodhouse 提交于
Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as arguments instead, since all its callers were just calculating the 'to' address for themselves anyway... (and sometimes doing so badly). Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 1月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
more mutex debugging: check for held locks during memory freeing, task exit, enable sysrq printouts, etc. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@infradead.org>
-
- 07 1月, 2006 2 次提交
-
-
由 Dave Jones 提交于
The 'make rodata read-only' patch in -mm exposes a latent bug in the 32-bit change_page_attr() function, which causes certain CPUs (Those with NX basically) to reboot instantly after pages are marked read-only. The same bug got fixed a while back on x86-64, but never got propagated to i386. Stuart Hayes from Dell also picked up on this last June, but it never got fixed, as the only thing affected by it aparently was the nvidia driver. Blatantly stealing description from his post.. "It doesn't appear to be fixed (in the i386 arch). The change_page_attr()/split_large_page() code will still still set all the 4K PTEs to PAGE_KERNEL (setting the _PAGE_NX bit) when a large page needs to be split. This wouldn't be a problem for the bulk of the kernel memory, but there are pages in the lower 4MB of memory that's free, and are part of large executable pages that also contain kernel code. If change_page_attr() is called on these, it will set the _PAGE_NX bit on the whole 2MB region that was covered by the large page, causing a large chunk of kernel code to be non-executable." Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NDave Jones <davej@redhat.com> Cc: <Stuart_Hayes@Dell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
x86 specific parts to make the .rodata section read only Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 12月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
It's illegal because it can sleep. Use a two step lookup scheme instead. First look up the vm_struct, then change the direct mapping, then finally unmap it. That's ok because nobody can change the particular virtual address range as long as the vm_struct is still in the global list. Also added some LinuxDoc documentation to iounmap. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-