- 16 10月, 2017 1 次提交
-
-
由 Michal Wajdeczko 提交于
Function intel_guc_wopcm_size didn't fit well in the old place. With this move upcoming cleanup will be simpler. Suggested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-2-michal.wajdeczko@intel.com
-
- 06 10月, 2017 1 次提交
-
-
由 Michal Wajdeczko 提交于
Unify initialization of the uC firmware helper as we want to maximize code reuse. Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-6-michal.wajdeczko@intel.com
-
- 22 9月, 2017 1 次提交
-
-
由 Michal Wajdeczko 提交于
Our global struct with params is named exactly the same way as new preferred name for the drm_i915_private function parameter. To avoid such name reuse lets use different name for the global. v5: pure rename v6: fix Credits-to: Coccinelle @@ identifier n; @@ ( - i915.n + i915_modparams.n ) Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
-
- 10 6月, 2017 1 次提交
-
-
由 Anusha Srivatsa 提交于
Coffee Lake reuses Kabylake's GuC. v2: Change Coffeelake to Coffee Lake Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: NLukasz Fiedorowicz <lukasz.fiedorowicz@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496965704-23610-1-git-send-email-anusha.srivatsa@intel.com
-
- 13 4月, 2017 1 次提交
-
-
The wopcm registers are write-once, so any write after the first one will just be ignored. The registers survive a GPU reset but not always a suspend/resume cycle, so to keep things simple keep the writes in the intel_uc_init_hw function instead of moving it earlier to make sure we attempt them every time we try to load GuC. Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491524332-23860-1-git-send-email-daniele.ceraolospurio@intel.com
-
- 07 4月, 2017 1 次提交
-
-
由 Anusha Srivatsa 提交于
Load GuC 10.56 on GLK. Work on firmware is still in progress. Testing has not been done yet. This patch addresses the initial need to load the GuC firmware for HuC authentication v2: rebased. Cc: Jeff mcgee <jeff.mcgee@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: NJohn Spotswood <john.a.spotswood@intel.com> Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490905447-15815-1-git-send-email-anusha.srivatsa@intel.com
-
- 05 4月, 2017 1 次提交
-
-
由 Michal Wajdeczko 提交于
Almost all other GuC fw definitions are using GUC|guc prefix. While around, in get_core_family() change explicit WARN into MISSING_CASE as it looks more appropriate, since GuC support capability we are controlling by intel_device_info.has_guc flag. Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170404133836.125736-1-michal.wajdeczko@intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 31 3月, 2017 1 次提交
-
-
由 Michal Wajdeczko 提交于
The file fits better. Also use "<invalid>" for invalid case. v2: move directly to .h (Joonas) Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 23 3月, 2017 4 次提交
-
-
由 Oscar Mateo 提交于
A GuC context and a HW context are in no way related, so the name "GuC context descriptor" is very unfortunate, because a new reader of the code gets overwhelmed very quickly with a lot of things called "context" that refer to different things. We can improve legibility a lot by simply renaming a few objects in the GuC code. v2: - Rebased - s/ctx_desc_pool/stage_desc_pool - Move some explanations to the definition of the guc_stage_desc struct (Chris) v3: - Calculate gemsize with less intermediate steps (Joonas) - Use BIT() macro (Joonas) Signed-off-by: NOscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Oscar Mateo 提交于
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be the condition for informing the GuC about it. Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while at it, add an explanation of what things go inside the ADS object. Signed-off-by: NOscar Mateo <oscar.mateo@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Oscar Mateo 提交于
Starting with intel_guc_loader, down to intel_guc_submission and finally to intel_guc_log. v2: - Null execbuf client outside guc_client_free (Daniele) - Assert if things try to get allocated twice (Daniele/Joonas) - Null guc->log.buf_addr when destroyed (Daniele) - Newline between returning success and error labels (Joonas) - Remove some unnecessary comments (Joonas) - Keep guc_log_create_extras naming convention (Joonas) - Helper function guc_log_has_extras (Joonas) - No need for separate relay_channel create/destroy. It's just another extra. - No need to nullify guc->log.flush_wq when destroyed (Joonas) - Hoist the check for has_extras out of guc_log_create_extras (Joonas) - Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele) - Make sure initel_guc_fini is not called before init is ever called (Daniele) v3: - Remove unnecessary parenthesis (Joonas) - Check for logs enabled on debugfs registration - Rebase on top of Tvrtko's "Fix request re-submission after reset" v4: - Rebased - Comment around enabling/disabling interrupts inside GuC logging (Joonas) Signed-off-by: NOscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Oscar Mateo 提交于
The GuC descriptor is big in size. If we use a local definition of guc_desc we have a chance to overflow stack, so avoid it. Also, Chris abhors scatterlists :) v2: Rebased, helper function to retrieve the context descriptor, s/ctx_pool_vma/ctx_pool/ v3: Zero out guc_context_desc before initialization v4: Do not do arithmetic on void pointers (Daniele) v5: Nicer than arithmetic on pointers (Chris, Joonas) Signed-off-by: NOscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 16 3月, 2017 1 次提交
-
-
由 Arkadiusz Hiler 提交于
This field is used to determine which kind of firmware the struct describes (GuC/HuC) - the name does not reflect. The enum used here have "type" in the name, so let's go with that. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com
-
- 15 3月, 2017 8 次提交
-
-
由 Arkadiusz Hiler 提交于
`guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
intel_{h,g}uc_init_fw selects correct firmware and then triggers it's preparation (fetch + initial parsing). This change separates out select steps, so those can be called by the sanitize_options(). Then, during the init_fw(), we prepare the firmware if the firmware was selected. Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Currently fw->path values can represent one of three possible states: 1) NULL - device without the uC 2) '\0' - device with the uC but have no firmware 3) else - device with the uC and we have firmware Second case is used only to WARN at a later stage. We can WARN right away and merge cases 1 and 2. Code can be even further simplified and common (HuC/GuC logic) happening right before the fetch can be offloaded to the common function. v2: fewer temporary variables, more straightforward flow (M. Wajdeczko) v3: DRM_ERROR instead of WARN (M. Wajdeczko) v4: coding standard (J. Lahtinen) v5: non-trivial rebase v6: remove path check, we are checking fetch status (M. Wajdeczko) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Current version of intel_guc_init_hw() does a lot: - cares about submission - loads huc - implement WA This change offloads some of the logic to intel_uc_init_hw(), which now cares about the above. v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko) v3: rename once again v4: remove spurious comments and add some style (J. Lahtinen) v5: flow changes, got rid of dead checks (M. Wajdeczko) v6: rebase v7: rebase & onion teardown (J. Lahtinen) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Let intel_guc_init_fw() focus on determining and fetching the correct firmware. This patch introduces intel_uc_sanitize_options() that is called from intel_sanitize_options(). Then, if we have GuC, we can call intel_guc_init_fw() conditionally and we do not have to do the internal checks. v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko) v3: fix comment again, change the nuke message (M. Wajdeczko) v4: update title to reflect new function name + rebase v5: text && remove 2 uneccessary checks (M. Wajdeczko) Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Instead of calling intel_guc_init() and intel_huc_init() one by one this patch introduces intel_uc_init_fw() function that calls them both. Called functions are renamed accordingly. Trying to have subject_verb_object ordering and more descriptive names, the intel_huc_init() and intel_guc_init() functions are renamed. For guc_init(): * `intel_guc` is the subject, so those functions now take intel_guc structure, instead of the dev_priv * init is the verb * fw is the object which better describes the function's role huc_init() change follows the same reasoning. v2: settle on intel_uc_fetch_fw name (M. Wajdeczko) v3: yet another rename - intel_uc_init_fw (J. Lahtinen) v4: non-trivial rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
The file fits better. Additionally rename it to intel_uc_prepare_fw(), as the function does more than simple fetch. `obj` cleanup in the function is also fixed (i.e. removed). In the fail scenario it was always 'put' but there's no possible flow that initializes the obj properly and then goes to the fail label. v2: remove second declaration, reorder (M. Wajdeczko) v3: non-trivial rebase v4: remove obj cleanup in the fail scenario (C. Wilson) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
GuC historically has two "startup" functions called _init() and _setup() Then HuC came with it's _init() and _load(). This commit renames intel_guc_setup() and intel_huc_load() to *uc_init_hw() as they called from the i915_gem_init_hw(). The aim is to be consistent in that entry points called during particular driver init phases (e.g. init_hw) are all suffixed by that phase. When reading the leaf functions, it should be clear at what stage during the driver load it is called and therefore what operations are legal at that point. Also, since the functions start with intel_guc and intel_huc they take appropiate structure. v2: commit message update (Chris Wilson) v3: change taken parameters to be more "semantic" (M. Wajdeczko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 12 3月, 2017 1 次提交
-
-
由 Sagar Arun Kamble 提交于
Like capture of GuC interrupts while enabling GuC submission, release them while disabling GuC submission. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489199821-6707-1-git-send-email-sagar.a.kamble@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 10 3月, 2017 1 次提交
-
-
由 Tvrtko Ursulin 提交于
In order to ensure no missed interrupts we must first re-direct the interrupts to GuC, and only then re-submit the requests to be replayed after a GPU reset. Otherwise context switch can fire before GuC has been set up to receive it triggering more hangs. v2: Rebase. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170309132005.1317-1-tvrtko.ursulin@linux.intel.com
-
- 09 3月, 2017 1 次提交
-
-
由 Sagar Arun Kamble 提交于
Driver needs to ensure that it doesn't mask the PM interrupts, which are unmasked/needed by GuC firmware. For that, Driver maintains a bitmask of interrupts to be kept unmasked, pm_intr_keep. pm_intr_keep was determined across GuC load. GuC gets loaded in different scenarios and it is not going to change the pm_intr_keep so this patch moves its setup to intel_irq_init. This patch fixes incorrect RPS masking leading to UP interrupts triggered even when at cur_freq=max and inversly for Down interrupts. Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: NSagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1488862355-9768-1-git-send-email-sagar.a.kamble@intel.com
-
- 15 2月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
We no longer need to take the struct_mutex for freeing objects, and on the finalisation paths here the mutex is not been used for serialisation of the pointer access, so remove the BKL wart. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170214133420.7977-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 09 2月, 2017 1 次提交
-
-
由 Tvrtko Ursulin 提交于
Currently to establish whether GuC firmware has been loaded or submission enabled (default DRM log level), one has to detect the absence of the message saying that the load has been skipped and infer the opposite. It is better to log the fact GuC firmware has been loaded and/or submission enabled explicitly to avoid any guesswork when looking at the logs. v2: * Log message polish. (Chris) * Future proof by reporting found firmware version. (Michal) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1486457425-32548-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
- 19 1月, 2017 2 次提交
-
-
由 Anusha Srivatsa 提交于
The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication. v2: rebased on top of drm-tip. Changed name format and upped version 1.7. v3: changed wait_for_atomic to wait_for v4: rebased. Rename intel_huc_auh() to intel_guc_auth_huc() and place the prototype in intel_guc.h,correct the comments. v5: rebased. Moved intel_guc_auth_huc from i915_guc_submission.c to intel_uc.c.Update dev to dev_priv in intel_guc_auth_huc(). Renamed HOST2GUC_ACTION_AUTHENTICATE_HUC TO INTEL_GUC_ACTION_ AUTHENTICATE_HUC v6: rebased. Add newline on DRM_ERRORs that already dont have one. v7: rebased. Replace wait_for with intel_wait_for_register() since the latter employs sleep optimisations for quick responses- as pointed out by Chris Wilson. v8: rebased. Cleanup the intel_guc_auth_huc() by removing checks already performed in earlier functions. Make comments more descriptive. v9: rebased. Changed the bias for pinning the HuC object. Move intel_guc_auth_huc() to intel_huc.c. Change DRM_DEBUGs to DRM_ERRORs in intel_guc_auth_huc(). Add return status to DRM_ERRORs. v10: Remove message not required for the user.. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: NXiang Haihao <haihao.xiang@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NAlex Dai <yu.dai@intel.com> Signed-off-by: NPeter Antoine <peter.antoine@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-5-git-send-email-anusha.srivatsa@intel.com
-
由 Anusha Srivatsa 提交于
The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: NXiang Haihao <haihao.xiang@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NAlex Dai <yu.dai@intel.com> Signed-off-by: NPeter Antoine <peter.antoine@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
-
- 18 1月, 2017 3 次提交
-
-
由 Anusha Srivatsa 提交于
HuC firmware css header has almost exactly same definition as GuC firmware except for the sw_version. Also, add a new member fw_type into intel_uc_fw to indicate what kind of fw it is. So, the loader will pull right sw_version from header. v2: rebased on-top of drm-intel-nightly v3: rebased. Rename device_id to guc_branch_client_version, make guc_sw_version a union. <Jeff Mcgee>. Put UC_FW_TYPE_GUC and UC_FW_TYPE_HUC into an enum. v4: rebased on top of drm-tip.Update dev to dev_priv in intel_uc_fw_fetch. v5: rebased. Add INTEL_ prefix to an enum. Add fw_type declaration from patch 1.Combine two different unions for huc and guc version, reserved etc into one union with two structs. v6: rebased. Change fw_type to enum. v7: rebased. Rename the enum fw_type to intel_uc_fw_type. Cc: Michal Wajdeczko <michal.wajdeczko.@intel.com> Tested-by: NXiang Haihao <haihao.xiang@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NAlex Dai <yu.dai@intel.com> Signed-off-by: NPeter Antoine <peter.antoine@intel.com> Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-3-git-send-email-anusha.srivatsa@intel.com
-
由 Anusha Srivatsa 提交于
Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well. s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose. v2: rebased on top of nightly. reapplied the search/replace as upstream code as changed. v3: removed G from messages in shared fw fetch function. v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch() and intel_guc_init(). v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for fields in enum intel_uc_fw_status. Remove uc_dev field since its never used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency. v6: rebased. Remove sections of code that were commented and no longer required. v7: rebased. Remove uc_fw_ prefix from path and obj fields in intel_uc_fw struct as suggested by Michal. v8: rebased. Add declaration of intel_guc_wopcm_size() in this patch instead of patch 3. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NAlex Dai <yu.dai@intel.com> Signed-off-by: NPeter Antoine <peter.antoine@intel.com> Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
-
由 Michal Wajdeczko 提交于
Functions supporting GuC logging capabilities were spread across many files, with unnecessary exposures and mixed with unrelated code. Dedicate file will make maintenance of all GuC functions easier as more functions are coming to support GuC submissions. Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com
-
- 13 1月, 2017 1 次提交
-
-
由 Chris Wilson 提交于
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt modification rather than proliferate it into all the callers of the insert (which may or may not in fact have to do the insertion). v2: Just do the guc invalidate unconditionally, (afaict) it has no impact without the guc loaded on gen8+ v3: Conditionally invalidate the guc - just in case that register has not been validated for other modes. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170112110050.25333-1-chris@chris-wilson.co.uk
-
- 12 1月, 2017 1 次提交
-
-
由 Michał Winiarski 提交于
Since commit 4741da92 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable"), we're asserting that GuC firmware is in the GuC mappable range. Except we're not pinning the object with bias, which means it's possible to trigger this assert. Let's add a proper bias. Fixes: 4741da92 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Tested-by: NTomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170111151739.28965-1-michal.winiarski@intel.com
-
- 10 1月, 2017 1 次提交
-
-
由 Michel Thierry 提交于
Commit cc3f90f0 ("drm/i915/glk: Reuse broxton code for geminilake") missed a few of occurences of IS_BROXTON() that should have been coverted to IS_GEN9_LP(). v2: Cite the right commit. (Ander) Fixes: cc3f90f0 ("drm/i915/glk: Reuse broxton code for geminilake") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: NMichel Thierry <michel.thierry@intel.com> Signed-off-by: NTomasz Lis <tomasz.lis@intel.com> Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (v1) Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483973495-15138-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
- 28 12月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Add an assertion to the plain i915_ggtt_offset() to double check that any offset we hand to the GuC is outside of its unmappable ranges. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161224193146.4402-1-chris@chris-wilson.co.ukReviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
-
- 02 12月, 2016 3 次提交
-
-
由 Tvrtko Ursulin 提交于
Recent refactoring forgot to update this one. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: bf9e8429 ("drm/i915: Make various init functions take dev_priv") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480668233-25372-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Tvrtko Ursulin 提交于
Like GEM init, GUC init, MOCS init and context creation. Enables them to lose dev_priv locals. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Tvrtko Ursulin 提交于
Makes all GEM object constructors consistent. v2: Fix compilation in GVT code. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
-
- 29 11月, 2016 1 次提交
-
-
由 Jérémy Lefaure 提交于
Two warnings are produced by gcc (tested with gcc 6.2.1): drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’: drivers/gpu/drm/i915/intel_csr.c:400:5: error: ‘fw’ is used uninitialized in this function [-Werror=uninitialized] if (fw) ^ and In file included from drivers/gpu/drm/i915/i915_drv.h:47:0, from drivers/gpu/drm/i915/intel_guc_loader.c:30: drivers/gpu/drm/i915/intel_guc_loader.c: In function ‘intel_guc_init’: ./include/drm/drmP.h:228:2: error: ‘fw’ may be used uninitialized in this function -Werror=maybe-uninitialized] drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__) ^~~~~~~~~~ drivers/gpu/drm/i915/intel_guc_loader.c:595:25: note: ‘fw’ was declared here const struct firmware *fw; ^~ When CONFIG_DRM_I915_WERROR is set, those warnings break the build. Initializing fw pointer to NULL in both cases removes the warnings. Signed-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161128234319.20800-1-jeremy.lefaure@lse.epita.fr
-
- 26 11月, 2016 1 次提交
-
-
由 Arkadiusz Hiler 提交于
GuC is not the only one micro controller we have. There are also HuC and DMC. Making the file more general will help with code organization. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-2-git-send-email-arkadiusz.hiler@intel.com
-