Silences the following warning:
drivers/staging/iio/light/tsl2x7x_core.c:553:70:
warning: Using plain integer as NULL pointer
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: J. August Brenner <jbrenner@taosinc.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: J. August Brenner <jbrenner@taosinc.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes the code simple. While at it also
fixed an uninitialized return with -EINVAL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: J. August Brenner <jbrenner@taosinc.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
This also fixes an error in return type during clk_get
failure.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.

The memory leak was a lack of freeing the iio_dev structure in the
remove function.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some of the defaults were missing or unclear. In particular, I suspect
the defaults were documented assuming there were still module parameters
and taking the default module parameters into account. Now, the defaults
are the values that will get chosen when the params passed to
dwc2_hcd_init are all -1.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The HWCFG4 register stores the supported utmi width values (8, 16 or
both). This commit reads that value and validates the configured value
against that.

If no (valid) value is given, the parameter defaulted to 8 bits
previously.  However, the documentation for dwc2_core_params_struct
suggests that the default should have been 16. Also, the pci bindings
explicitely set the value to 16, so this commit changes the default to
16 bits (if supported, 8 bits otherwise).

With the default changed, the value set in pci.c is changed to -1 to
make it autodetected as well.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Before, the hwcfg registers were read at device init time, but
interpreted at various parts in the code. This commit unpacks the hwcfg
register values into a struct with properly labeled variables at init
time, which makes all the other code using these values more consise and
easier to read. Some values that were previously stored in the hsotg
struct are now moved into this new struct as well.

In addition to the hwcfg registers, the contents of some fifo size
registers are also unpacked. The hwcfg registers are read-only, so they
can be safely stored. The fifo size registers are read-write registers,
but their power-on values are significant: they give the maximum depth
of the fifo they describe.

This commit mostly moves code, but also attempts to simplify some
expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.

Finally, all of the parameters read from the hardware are debug printed
after unpacking them, so a bunch of debug prints can be removed from
other places.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Bits 16-31 are reserved, so the old code just reads the whole register to
get bits 0-15, assuming the reserved bits would be 0 (which seems true
on current hardware, but who knows...).

This commit properly masks out the reserved bits when reading and
doesn't touch the reserved bits while writing.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For calculating FIFO offsets, the sizes of preceding fifos need to be
known. For filling the GDFIFOCFG register, these fifo sizes were read
from hardware registers. However, these values were written to these
registers just a few lines before, so we can just use the values written
instead.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For some reason, the value of the HPTXFSIZ register was built in the
ptxfsiz variable, while there was also a hptxfsiz variable availble.
Better just use that and remove the (now unused) ptxfsiz variable.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The value of the hcchar register is built from individual values by
shifting and masking. Before, the debug output extracted the individual
values out of the complete hcchar register again by doing the reverse.
This commit makes the debug output use the original values instead.

One debug message got removed, since it would always print a fixed value
of zero.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This line extracted the available queue space without properly shifting
it. Since the code only cared wether it was zero or not, it worked as
expected without the shift, but adding shift makes the code cleaner.

While we're here, store the result in a helper variable that was already
declared to increase readability a bit more.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This (read-only) register was read twice, storing it for later use the
second time. Now it is only read once, storing it right away.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Various register fields wider than one bit have constants defined for
their value. Previously, these registers would define the values as they
appear in the register, so shifted to the right to the position the
value appears in the register.

This commit changes those constants to their natural values (e.g, 0, 1,
2, etc.), as they are after shifting the register value to the right.
This also changes all relevant code to shift the values before comparing
them with constants.

This has the advantage that the values can be stored in smaller
variables (now they always require a u32) and makes the handling of
these values more consistent with other register fields that represent
natural numbers instead of enumerations (e.g., number of host channels).
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, the max_packet_count could be set to 1 << x, where x is the
number of bits available (width + 4 in the code). Since 1 << x requires
x + 1 bits to represent, this will not work. The real maximum value is
(1 << x) - 1. This value is already used the default when the set value
is invalid, but the upper limit for the set value was off-by-one.

This change makes the check the same as the one for max_transfer_size,
which was already correct.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A generic set of FIFOSIZE_* constants is defined which applies to all
fifo size and offset registers. It is already used for both the
GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well.
Some of these also had specific constants defined. This patch removes
the specific constants and documents to use the generic constants.

Note that the removed constants weren't actually used. Instead, most of
the related code uses hardcoded masks and shifts. But given that
subsequent patches will be moving that code around and introducing the
constants in the process, this patch leaves those untouched.

Also note that the GRXFSIZ register also contains a fifo size, but
there is no corresponding start address register (it is always the first
fifo in memory), the layout of the GRXFSIZ register is different and
cannot use the same constants.
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Acked-by: NPaul Zimmerman <paulz@synopsys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

__Function__ gets renamed with __func__
Signed-Off-By: NPaul McQuade <paulmcquad@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

many of the macros defined in Version.h are not being used,
so we can remove the file.
Signed-off-by: Nnavin patidar <navinp@cdac.in>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

"keyid" is used as an offset into the ->dot11DefKey[] array.  The array
has 4 elements.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a copy and paste bug here so we copy 4 bytes instead of 3.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Obviously it's impossible for ->KeyLength to be both 5 and 13.  I assume
that && was intended here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These should be "<" instead of "<=".  Also we can use the ARRAY_SIZE()
macro.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>